X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=566e6cf69ce0c7560f28cda337c7b5add2e0a429;hb=142e1f5c7e3b607ccf82d3989477e93adc59c8b6;hp=470f38971e733a905162e1532bf8d23dbfe3b551;hpb=c45ab5e9b76adc4097a3243bfc07502e658ccd5c;p=openvswitch diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml index 470f3897..566e6cf6 100644 --- a/vswitchd/vswitch.xml +++ b/vswitchd/vswitch.xml @@ -210,9 +210,9 @@
1.1.0pre2
.
+ The Open vSwitch version number, e.g. 1.1.0
.
If Open vSwitch was configured with a build number, then it is
- also included, e.g. 1.1.0pre2+build4948
.
+ also included, e.g. 1.1.0+build6579
.
- The following mode requires the upstream switch to support 802.3ad with
+ The following modes require the upstream switch to support 802.3ad with
successful LACP negotiation. If LACP negotiation fails then
- balance-slb
mode is used as a fallback:
+ balance-slb
style flow hashing is used as a fallback:
stable
Attempts to always assign a given flow to the same slave
+ consistently. In an effort to maintain stability, no load
+ balancing is done. Uses a similar hashing strategy to
+ balance-tcp
, falling back to balance-slb
+ style hashing when LACP negotiations are unsuccessful.
Slave selection decisions are made based on LACP port ID when LACP + negotiations are successful, falling back to openflow port number + when unsuccessful. Thus, decisions are consistent across all + ovs-vswitchd instances with equivalent port IDs.
+These columns apply only to bonded ports. Their values are otherwise ignored.
@@ -637,6 +652,13 @@ LACP negotiations, link status decisions are made by the system with the numerically lower priority. Must be a number between 1 and 65535. +lacp-time
fast
and
+ slow
. By default slow
is used. When
+ configured to be fast
more frequent LACP heartbeats
+ will be requested causing connectivity problems to be detected more
+ quickly.- The observed state of the physical network link; - i.e. whether a carrier is detected by the interface. + The observed state of the physical network link. This is ordinarily + the link's carrier status. If the interface's is + a bond configured for miimon monitoring, it is instead the network + link's miimon status.
+ To be selected for mirroring, a given packet must enter or leave the + bridge through a selected port and it must also be in one of the + selected VLANs. +
++ These columns are mutually exclusive. Exactly one of them must be + nonempty. +
+Output port for selected packets, if nonempty. Mutually exclusive - with .
+Output port for selected packets, if nonempty.
Specifying a port for mirror output reserves that port exclusively for mirroring. No frames other than those selected for mirroring will be forwarded to the port, and any frames received on the port @@ -1560,8 +1585,7 @@
Output VLAN for selected packets, if nonempty. Mutually exclusive - with .
+Output VLAN for selected packets, if nonempty.
The frames will be sent out all ports that trunk , as well as any ports with implicit VLAN . When a mirrored frame is sent out a @@ -1692,23 +1716,6 @@
discover
Enables controller discovery.
-In controller discovery mode, Open vSwitch broadcasts a DHCP
- request with vendor class identifier OpenFlow
across
- all of the bridge's network devices. It will accept any valid
- DHCP reply that has the same vendor class identifier and includes
- a vendor-specific option with code 1 whose contents are a string
- specifying the location of the controller in the same format as
- .
The DHCP reply may also, optionally, include a vendor-specific
- option with code 2 whose contents are a string specifying the URI
- to the base of the OpenFlow PKI
- (e.g. http://192.168.0.1/openflow/pki
). This URI is
- used only for bootstrapping the OpenFlow PKI at initial switch
- setup; ovs-vswitchd
does not use it at all.
The following connection methods are currently supported for service @@ -1768,10 +1775,7 @@ -
If not specified, the default is implementation-specific. If
- is discover
, the connection mode
- is always treated as in-band
regardless of the actual
- setting.
If not specified, the default is implementation-specific.
These values are considered only when
- is discover
.
^
. If not specified, the default
- is implementation-specific.
- /etc/resolv.conf
when the
- controller is discovered. If not specified, the default
- is implementation-specific. Open vSwitch will only modify
- /etc/resolv.conf
if the DHCP response that it receives
- specifies one or more DNS servers.
- These values are considered only in in-band control mode (see
- ) and only when
- is not discover
. (For controller discovery, the network
- configuration obtained via DHCP is used instead.)
When multiple controllers are configured on a single bridge, there should be only one set of unique values in these columns. If different @@ -2065,6 +2046,7 @@ will send a probe. If a response is not received for the same additional amount of time, Open vSwitch assumes the connection has been broken and attempts to reconnect. Default is implementation-specific. + A value of 0 disables inactivity probes.