X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=3b500151133182670fcffbf3f70ce50fe2e1198d;hb=10df718e73122df2f3b04ed585e50e4b299a8cbd;hp=2aba34fdf4f1840d4db4c3635c2477586832893d;hpb=8872051980d541cd7b88c624ac3a08e85171df40;p=openvswitch
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 2aba34fd..3b500151 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -15,12 +15,6 @@
Set of bridges managed by the daemon.
-
- Default used by bridges. May be
- overridden on a per-bridge basis by the column in .
-
-
Remote database clients to which the Open vSwitch's database server
should connect or to which it should listen.
@@ -31,8 +25,12 @@
- Key-value pairs that identify this Open vSwitch's role in
- external systems. The currently defined key-value pairs are:
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique. The currently
+ defined common key-value pairs are:
system-uuid
- A universally unique identifier for the Open vSwitch's
@@ -56,6 +54,34 @@
after it finishes applying a set of
configuration changes.
+
+
+ Describes functionality supported by the hardware and software platform
+ on which this Open vSwitch is based. Clients should not modify this
+ column. See the description for defined
+ capability categories and the meaning of associated
+ records.
+
+
+
+
+ Key-value pairs that report statistics about a running Open_vSwitch
+ daemon. The current implementation updates these counters
+ periodically. In the future, we plan to, instead, update them only
+ when they are queried (e.g. using an OVSDB select
+ operation) and perhaps at other times, but not on any regular
+ periodic basis.
+
+ The currently defined key-value pairs are listed below. Some Open
+ vSwitch implementations may not support some statistics, in which
+ case those key-value pairs are omitted.
+
+ load-average
+ -
+ System load average multiplied by 100 and rounded to the nearest
+ integer.
+
+
@@ -104,14 +130,47 @@
- OpenFlow controller. If unset, defaults to that specified by
- in the
- table. If the default is also unset, then
- no OpenFlow controller will be used.
+ OpenFlow controller set. If unset, then no OpenFlow controllers
+ will be used.
+
+
+
+ When a controller is configured, it is, ordinarily, responsible
+ for setting up all flows on the switch. Thus, if the connection to
+ the controller fails, no new network connections can be set up.
+ If the connection to the controller stays down long enough,
+ no packets can pass through the switch at all. This setting
+ determines the switch's response to such a situation. It may be set
+ to one of the following:
+
+ standalone
+ - If no message is received from the controller for three
+ times the inactivity probe interval
+ (see
), then Open vSwitch
+ will take over responsibility for setting up flows. In
+ this mode, Open vSwitch causes the bridge to act like an
+ ordinary MAC-learning switch. Open vSwitch will continue
+ to retry connecting to the controller in the background
+ and, when the connection succeeds, it will discontinue its
+ standalone behavior.
+ secure
+ - Open vSwitch will not set up flows on its own when the
+ controller connection fails or when no controllers are
+ defined. The bridge will continue to retry connecting to
+ any defined controllers forever.
+
+
+ If this value is unset, the default is implementation-specific.
+ When more than one controller is configured,
+ is considered only when none of the
+ configured controllers can be contacted.
- Reports the OpenFlow datapath ID in use. Exactly 16 hex digits.
+ Reports the OpenFlow datapath ID in use. Exactly 16 hex
+ digits. (Setting this column will have no useful effect. Set
+ :other-config
+ instead.)
@@ -123,8 +182,12 @@
- Key-value pairs that identify this bridge's role in external systems.
- The currently defined key-value pairs are:
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique. The currently
+ defined common key-value pairs are:
network-uuids
- Semicolon-delimited set of universally unique identifier(s) for
@@ -179,37 +242,48 @@
A bridge port must be configured for VLANs in one of two
mutually exclusive ways:
- - A ``trunk port'' has an empty value for
-
and a possibly non-empty
- value.
+ - A ``trunk port'' has an empty value for
. Its value may be
+ empty or non-empty.
- An ``implicitly tagged VLAN port'' or ``access port''
- has an nonempty value for
and an empty
- value.
+ has an nonempty value for . Its
+ value must be empty.
If and are both
nonempty, the configuration is ill-formed.
- If nonempty, this port's implicitly tagged VLAN. Frames
- arriving on trunk ports will be forwarded to this port only
- if they are tagged with the given VLAN. Frames arriving on
- other VLAN ports will be forwarded to this port only if they
- have the same value. Frames forwarded
- to this port will not have an 802.1Q header.
- When a frame with a 802.1Q header that indicates a nonzero VLAN is
- received on an implicit VLAN port, it is discarded.
- Must be empty if this is a trunk port.
+
+ If this is an access port (see above), the port's implicitly
+ tagged VLAN. Must be empty if this is a trunk port.
+
+
+ Frames arriving on trunk ports will be forwarded to this
+ port only if they are tagged with the given VLAN (or, if
+ is 0, then if they lack a VLAN header).
+ Frames arriving on other access ports will be forwarded to
+ this port only if they have the same
+ value. Frames forwarded to this port will not have an
+ 802.1Q header.
+
+
+ When a frame with a 802.1Q header that indicates a nonzero
+ VLAN is received on an access port, it is discarded.
+
- The 802.1Q VLAN(s) that this port trunks. If the column is
- empty, then the port trunks all VLANs as well as packets that
- have no VLAN header. Otherwise, only frames that have an
- 802.1Q header with one of the specified VLANs are accepted.
- If 0
is included, then frames without an 802.1Q
- header are also accepted.
- Must be empty unless this is a trunk port.
+
+ If this is a trunk port (see above), the 802.1Q VLAN(s) that
+ this port trunks; if it is empty, then the port trunks all
+ VLANs. Must be empty if this is an access port.
+
+
+ Frames arriving on trunk ports are dropped if they are not
+ in one of the specified VLANs. For this purpose, packets
+ that have no VLAN header are treated as part of VLAN 0.
+
@@ -249,6 +323,10 @@
+
+ Quality of Service configuration for this port.
+
+
The MAC address to use for this port for the purpose of choosing the
bridge's MAC address. This column does not necessarily reflect the
@@ -262,13 +340,21 @@
- Key-value pairs that identify this port's role in external systems. No
- key-value pairs native to are currently defined.
- For fake bridges (see the column), external
- IDs for the fake bridge are defined here by prefixing a
- key
- with fake-bridge-
,
- e.g. fake-bridge-network-uuids
.
+
+ Key-value pairs for use by external frameworks that integrate with
+ Open vSwitch, rather than by Open vSwitch itself. System integrators
+ should either use the Open vSwitch development mailing list to
+ coordinate on common key-value definitions, or choose key names that
+ are likely to be unique.
+
+
+ No key-value pairs native to are currently
+ defined. For fake bridges (see the
+ column), external IDs for the fake bridge are defined here by
+ prefixing a key with fake-bridge-
,
+ e.g. fake-bridge-network-uuids
.
+
@@ -363,8 +449,8 @@
the same except one has an optional identifier and the other does
not, the more specific one is matched first. in_key
is considered more specific than local_ip
if a port
- defines one and another port defines the other. The arguments
- are:
+ defines one and another port defines the other. The following
+ options may be specified in the column:
remote_ip
- Required. The tunnel endpoint.
@@ -391,7 +477,7 @@
either be a 32-bit number or the word flow
. If
flow
is specified then the key may be set using
the set_tunnel
Nicira OpenFlow vendor extension (0
- is used in the absense of an action). The ovs-ofctl manual
+ is used in the absence of an action). The ovs-ofctl manual
page contains additional information about the Nicira OpenFlow
vendor extensions. Default is no key.
@@ -439,11 +525,23 @@
patch
- A pair of virtual devices that act as a patch cable. A
- peer
argument is required that indicates the name
- of the other side of the patch. Since a patch must work in
- pairs, a second patch interface must be declared with the
- name
and peer
arguments reversed.
+
+
+ A pair of virtual devices that act as a patch cable. The column must have the following key-value pair:
+
+
+ peer
+ -
+ The
of the for
+ the other side of the patch. The named 's own peer
option must specify
+ this 's name. That is, the two patch
+ interfaces must have reversed and
+ peer
values.
+
+
+
@@ -477,15 +575,23 @@
- Key-value pairs that identify this interface's role in external
- systems. All of the currently defined key-value pairs specifically
+
+ Key-value pairs for use by external frameworks that integrate
+ with Open vSwitch, rather than by Open vSwitch itself. System
+ integrators should either use the Open vSwitch development
+ mailing list to coordinate on common key-value definitions, or
+ choose key names that are likely to be unique.
+
+
+ All of the currently defined key-value pairs specifically
apply to an interface that represents a virtual Ethernet interface
connected to a virtual machine. These key-value pairs should not be
present for other types of interfaces. Keys whose names end
in -uuid
have values that uniquely identify the entity
in question. For a Citrix XenServer hypervisor, these values are
UUIDs in RFC 4122 format. Other hypervisors may use other
- formats.
+ formats.
+
The currently defined key-value pairs are:
vif-uuid
@@ -502,9 +608,169 @@
field in the VIF record for this interface.
+
+
+
+ Key-value pairs that report interface statistics. The current
+ implementation updates these counters periodically. In the future,
+ we plan to, instead, update them when an interface is created, when
+ they are queried (e.g. using an OVSDB select
operation),
+ and just before an interface is deleted due to virtual interface
+ hot-unplug or VM shutdown, and perhaps at other times, but not on any
+ regular periodic basis.
+
+ The currently defined key-value pairs are listed below. These are
+ the same statistics reported by OpenFlow in its struct
+ ofp_port_stats
structure. If an interface does not support a
+ given statistic, then that pair is omitted.
+
+ -
+ Successful transmit and receive counters:
+
+ rx_packets
+ - Number of received packets.
+ rx_bytes
+ - Number of received bytes.
+ tx_packets
+ - Number of transmitted packets.
+ tx_bytes
+ - Number of transmitted bytes.
+
+
+ -
+ Receive errors:
+
+ rx_dropped
+ - Number of packets dropped by RX.
+ rx_frame_err
+ - Number of frame alignment errors.
+ rx_over_err
+ - Number of packets with RX overrun.
+ rx_crc_err
+ - Number of CRC errors.
+ rx_errors
+ -
+ Total number of receive errors, greater than or equal
+ to the sum of the above.
+
+
+
+ -
+ Transmit errors:
+
+ tx_dropped
+ - Number of packets dropped by TX.
+ collisions
+ - Number of collisions.
+ tx_errors
+ -
+ Total number of transmit errors, greater
+ than or equal to the sum of the above.
+
+
+
+
+
+
+ Quality of Service (QoS) configuration for each Port that
+ references it.
+
+
+ The type of QoS to implement. The column in the table
+ identifies the types that a switch actually supports. The currently
+ defined types are listed below:
+
+ linux-htb
+ - Linux ``hierarchy token bucket'' classifier.
+
+
+
+
+ A map from queue numbers to records. The
+ supported range of queue numbers depend on . The
+ queue numbers are the same as the queue_id
used in
+ OpenFlow in struct ofp_action_enqueue
and other
+ structures. Queue 0 is used by OpenFlow output actions that do not
+ specify a specific queue.
+
+
+
+ Key-value pairs for configuring QoS features that depend on
+ .
+ The linux-htb
class supports the following key-value
+ pairs:
+
+ max-rate
+ - Maximum rate shared by all queued traffic, in bit/s.
+ Optional. If not specified, for physical interfaces, the
+ default is the link rate. For other interfaces or if the
+ link rate cannot be determined, the default is currently 100
+ Mbps.
+
+
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
+
+
+
+ A configuration for a port output queue, used in configuring Quality of
+ Service (QoS) features. May be referenced by column in table.
+
+
+ Key-value pairs for configuring the output queue. The supported
+ key-value pairs and their meanings depend on the
+ of the records that reference this row.
+ The key-value pairs defined for of min-rate
are:
+
+ min-rate
+ - Minimum guaranteed bandwidth, in bit/s. Required.
+
+ The key-value pairs defined for of linux-htb
are:
+
+ min-rate
+ - Minimum guaranteed bandwidth, in bit/s. Required.
+ max-rate
+ - Maximum allowed bandwidth, in bit/s. Optional. If specified, the
+ queue's rate will not be allowed to exceed the specified value, even
+ if excess bandwidth is available. If unspecified, defaults to no
+ limit.
+ burst
+ - Burst size, in bits. This is the maximum amount of ``credits''
+ that a queue can accumulate while it is idle. Optional. Details of
+ the
linux-htb
implementation require a minimum burst
+ size, so a too-small burst
will be silently
+ ignored.
+ priority
+ - A nonnegative 32-bit integer. Defaults to 0 if
+ unspecified. A queue with a smaller
priority
+ will receive all the excess bandwidth that it can use before
+ a queue with a larger value receives any. Specific priority
+ values are unimportant; only relative ordering matters.
+
+
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
+
+
A port mirror within a .
A port mirror configures a bridge to send selected frames to special
@@ -584,24 +850,95 @@
in the appropriate table or tables.
+
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
+
- An OpenFlow controller.
+ An OpenFlow controller.
+
+
+ Open vSwitch supports two kinds of OpenFlow controllers:
+
+
+
+ - Primary controllers
+ -
+
+ This is the kind of controller envisioned by the OpenFlow 1.0
+ specification. Usually, a primary controller implements a network
+ policy by taking charge of the switch's flow table.
+
+
+
+ Open vSwitch initiates and maintains persistent connections to
+ primary controllers, retrying the connection each time it fails or
+ drops. The column in the
+ table applies to primary controllers.
+
+
+
+ Open vSwitch permits a bridge to have any number of primary
+ controllers. When multiple controllers are configured, Open
+ vSwitch connects to all of them simultaneously. Because
+ OpenFlow 1.0 does not specify how multiple controllers
+ coordinate in interacting with a single switch, more than
+ one primary controller should be specified only if the
+ controllers are themselves designed to coordinate with each
+ other. (The Nicira-defined NXT_ROLE
OpenFlow
+ vendor extension may be useful for this.)
+
+
+ - Service controllers
+ -
+
+ These kinds of OpenFlow controller connections are intended for
+ occasional support and maintenance use, e.g. with
+ ovs-ofctl
. Usually a service controller connects only
+ briefly to inspect or modify some of a switch's state.
+
+
+
+ Open vSwitch listens for incoming connections from service
+ controllers. The service controllers initiate and, if necessary,
+ maintain the connections from their end. The column in the table does
+ not apply to service controllers.
+
+
+
+ Open vSwitch supports configuring any number of service controllers.
+
+
+
+
+
+ The determines the type of controller.
+
- Connection method for controller.
- The following connection methods are currently
- supported:
+ Connection method for controller.
+
+ The following connection methods are currently supported for primary
+ controllers:
+
ssl:ip
[:port
]
-
The specified SSL port (default: 6633) on the host at
- the given ip, which must be expressed as an IP address
- (not a DNS name). The
- column in the must point to a valid
- SSL configuration when this form is used.
+ the given ip, which must be expressed as an IP address
+ (not a DNS name). The
+ column in the table must point to a
+ valid SSL configuration when this form is used.
SSL support is an optional feature that is not always built as
part of Open vSwitch.
@@ -610,15 +947,85 @@
the given ip, which must be expressed as an IP address
(not a DNS name).
discover
- - Enables controller discovery.
- none
- - Disables the controller.
+ -
+
Enables controller discovery.
+ In controller discovery mode, Open vSwitch broadcasts a DHCP
+ request with vendor class identifier OpenFlow
across
+ all of the bridge's network devices. It will accept any valid
+ DHCP reply that has the same vendor class identifier and includes
+ a vendor-specific option with code 1 whose contents are a string
+ specifying the location of the controller in the same format as
+ .
+ The DHCP reply may also, optionally, include a vendor-specific
+ option with code 2 whose contents are a string specifying the URI
+ to the base of the OpenFlow PKI
+ (e.g. http://192.168.0.1/openflow/pki
). This URI is
+ used only for bootstrapping the OpenFlow PKI at initial switch
+ setup; ovs-vswitchd
does not use it at all.
+
+
+ The following connection methods are currently supported for service
+ controllers:
+
+
+ pssl:
[port][:ip
]
+ -
+
+ Listens for SSL connections on the specified TCP port
+ (default: 6633). If ip, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
+
+
+ The column in the table must point to a valid SSL
+ configuration when this form is used.
+
+ SSL support is an optional feature that is not always built as
+ part of Open vSwitch.
+
+ ptcp:
[port][:ip
]
+ -
+ Listens for connections on the specified TCP port
+ (default: 6633). If ip, which must be expressed as an
+ IP address (not a DNS name), is specified, then connections are
+ restricted to the specified local IP address.
+
+
+ When multiple controllers are configured for a single bridge, the
+ values must be unique. Duplicate
+ values yield unspecified results.
- Either in-band
or out-of-band
. If not
- specified, the default is implementation-specific.
+ If it is specified, this setting must be one of the following
+ strings that describes how Open vSwitch contacts this OpenFlow
+ controller over the network:
+
+
+ in-band
+ - In this mode, this controller's OpenFlow traffic travels over the
+ bridge associated with the controller. With this setting, Open
+ vSwitch allows traffic to and from the controller regardless of the
+ contents of the OpenFlow flow table. (Otherwise, Open vSwitch
+ would never be able to connect to the controller, because it did
+ not have a flow to enable it.) This is the most common connection
+ mode because it is not necessary to maintain two independent
+ networks.
+ out-of-band
+ - In this mode, OpenFlow traffic uses a control network separate
+ from the bridge associated with this controller, that is, the
+ bridge does not use any of its own network devices to communicate
+ with the controller. The control network must be configured
+ separately, before or after
ovs-vswitchd
is started.
+
+
+
+ If not specified, the default is implementation-specific. If
+ is discover
, the connection mode
+ is always treated as in-band
regardless of the actual
+ setting.
@@ -637,45 +1044,9 @@
assumes the connection has been broken and attempts to reconnect.
Default is implementation-specific.
-
-
- When a controller is configured, it is, ordinarily, responsible
- for setting up all flows on the switch. Thus, if the connection to
- the controller fails, no new network connections can be set up.
- If the connection to the controller stays down long enough,
- no packets can pass through the switch at all. This setting
- determines the switch's response to such a situation. It may be set
- to one of the following:
-
- standalone
- - If no message is received from the controller for three
- times the inactivity probe interval
- (see
), then Open vSwitch
- will take over responsibility for setting up flows. In
- this mode, Open vSwitch causes the datapath to act like an
- ordinary MAC-learning switch. Open vSwitch will continue
- to retry connecting to the controller in the background
- and, when the connection succeeds, it will discontinue its
- standalone behavior.
- secure
- - Open vSwitch will not set up flows on its own when the
- controller connection fails. It will continue retry
- connecting to the controller forever.
-
-
- If this value is unset, the default is
- implementation-specific.
-
-
- In conjunction with ,
- the maximum number of unused packet credits that the bridge will
- allow to accumulate, in packets. If not specified, the default
- is implementation-specific.
-
-
The maximum rate at which packets in unknown flows will be
forwarded to the OpenFlow controller, in packets per second. This
@@ -695,11 +1066,21 @@
actual rate that packets are sent to the controller is up to
twice the specified rate.
+
+
+ In conjunction with ,
+ the maximum number of unused packet credits that the bridge will
+ allow to accumulate, in packets. If not specified, the default
+ is implementation-specific.
+
-
+
+ These values are considered only when
+ is discover
.
+
- If is discover
, a POSIX
+ A POSIX
extended regular expression against which the discovered controller
location is validated. The regular expression is implicitly
anchored at the beginning of the controller location string, as
@@ -708,8 +1089,7 @@
- If is discover
,
- whether to update /etc/resolv.conf
when the
+ Whether to update /etc/resolv.conf
when the
controller is discovered. If not specified, the default
is implementation-specific. Open vSwitch will only modify
/etc/resolv.conf
if the DHCP response that it receives
@@ -717,20 +1097,45 @@
-
-
- If is not discover
, the IP
- address of the gateway to configure on the local port.
-
+
+ These values are considered only in in-band control mode (see
+ ) and only when
+ is not discover
. (For controller discovery, the network
+ configuration obtained via DHCP is used instead.)
+
+ When multiple controllers are configured on a single bridge, there
+ should be only one set of unique values in these columns. If different
+ values are set for these columns in different controllers, the effect
+ is unspecified.
- If is not discover
, the IP
- address to configure on the local port.
+ The IP address to configure on the local port,
+ e.g. 192.168.0.123
. If this value is unset, then
+ and are
+ ignored.
- If is not discover
, the IP
- netmask to configure on the local port.
+ The IP netmask to configure on the local port,
+ e.g. 255.255.255.0
. If is set
+ but this value is unset, then the default is chosen based on whether
+ the IP address is class A, B, or C.
+
+
+
+ The IP address of the gateway to configure on the local port, as a
+ string, e.g. 192.168.0.1
. Leave this column unset if
+ this network has no gateway.
+
+
+
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
@@ -774,6 +1179,14 @@
disambiguate the traffic.
When this option is enabled, a maximum of 508 ports are supported.
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
@@ -806,6 +1219,14 @@
SSL connection to a man-in-the-middle attack obtaining the initial
CA certificate. It may still be useful for bootstrapping.
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
@@ -813,10 +1234,11 @@
of switches.
- IP address to report as ``agent address'' to collectors. If not
- specified, defaults to the in
- the collector's . If neither is specified,
- sFlow is disabled.
+ Name of the network device whose IP address should be reported as the
+ ``agent address'' to collectors. If not specified, the IP address
+ defaults to the in the
+ collector's . If an agent IP address cannot be
+ determined either way, sFlow is disabled.
@@ -839,5 +1261,55 @@
sFlow targets in the form
ip:port
.
+
+
+ Key-value pairs for use by external frameworks that integrate with Open
+ vSwitch, rather than by Open vSwitch itself. System integrators should
+ either use the Open vSwitch development mailing list to coordinate on
+ common key-value definitions, or choose key names that are likely to be
+ unique. No common key-value pairs are currently defined.
+
+
+
+
+ Records in this table describe functionality supported by the hardware
+ and software platform on which this Open vSwitch is based. Clients
+ should not modify this table.
+
+ A record in this table is meaningful only if it is referenced by the
+ column in the
+ table. The key used to reference it, called
+ the record's ``category,'' determines the meanings of the
+ column. The following general forms of
+ categories are currently defined:
+
+
+ qos-type
+ - type is supported as the value for
+
in the table.
+
+
+
+
+ Key-value pairs that describe capabilities. The meaning of the pairs
+ depends on the category key that the column in the table
+ uses to reference this record, as described above.
+
+ The presence of a record for category qos-type
+ indicates that the switch supports type as the value of
+ the column in the
+ table. The following key-value pairs are defined to further describe
+ QoS capabilities:
+
+
+ n-queues
+ - Number of supported queues, as a positive integer. Keys in the
+
column for
+ records whose value
+ equals type must range between 0 and this value minus one,
+ inclusive.
+
+