X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=vswitchd%2Fvswitch.xml;h=293634b6ef5541b4296625a5f1957ffea5813293;hb=59405f317bf13896161d13eb485077f0b33154e7;hp=bec2d58e894735b76cbdb9f8fec476bc5d6f3752;hpb=b31bcf60cf4fbabca0182196c97b3004e42f53e5;p=openvswitch diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml index bec2d58e..293634b6 100644 --- a/vswitchd/vswitch.xml +++ b/vswitchd/vswitch.xml @@ -28,12 +28,6 @@ choose key names that are likely to be unique. The currently defined common key-value pairs are:
system-type
XenServer
or KVM
.system-version
5.6.0
on XenServer.system-id
+ These columns report the types and versions of the hardware and + software running Open vSwitch. We recommend in general that software + should test whether specific features are supported instead of relying + on version number checks. These values are primarily intended for + reporting to human administrators. +
+ +1.1.0pre2
.
+ If Open vSwitch was configured with a build number, then it is
+ also included, e.g. 1.1.0pre2+build4948
.
+
+ The database schema version number in the form
+ major.minor.tweak
,
+ e.g. 1.2.3
. Whenever the database schema is changed in
+ a non-backward compatible way (e.g. deleting a column or a table),
+ major is incremented. When the database schema is changed
+ in a backward compatible way (e.g. adding a new column),
+ minor is incremented. When the database schema is changed
+ cosmetically (e.g. reindenting its syntax), tweak is
+ incremented.
+
+ The schema version is part of the database schema, so it can also be + retrieved by fetching the schema using the Open vSwitch database + protocol. +
+
+ An identifier for the type of system on top of which Open vSwitch
+ runs, e.g. XenServer
or KVM
.
+
+ System integrators are responsible for choosing and setting an + appropriate value for this column. +
+
+ The version of the system identified by ,
+ e.g. 5.5.0-24648p
on XenServer 5.5.0 build 24648.
+
+ System integrators are responsible for choosing and setting an + appropriate value for this column. +
+These columns primarily configure the Open vSwitch database @@ -457,11 +510,10 @@
A port that has more than one interface is a ``bonded port.'' Bonding allows for load balancing and fail-over. Open vSwitch supports ``source load balancing'' (SLB) bonding, which - assigns flows to slaves based on source MAC address, with - periodic rebalancing as traffic patterns change. This form of - bonding does not require 802.3ad or other special support from - the upstream switch to which the slave devices are - connected.
+ assigns flows to slaves based on source MAC address and output VLAN, + with periodic rebalancing as traffic patterns change. This form of + bonding does not require 802.3ad or other special support from the + upstream switch to which the slave devices are connected.These columns apply only to bonded ports. Their values are otherwise ignored.
@@ -703,9 +755,122 @@ bypass certain components of the IP stack (such as IP tables) and it may be useful to disable it if these features are required or as a debugging measure. Default is enabled, set to -false
to disable. If IPsec is enabled through the
- parameters, header caching will be
- automatically disabled.false
to disable.
+ ipsec_gre
gre
) must be uniquely identified by the
+ combination of remote_ip
and
+ local_ip
. Note that if two ports are defined
+ that are the same except one has an optional identifier and
+ the other does not, the more specific one is matched first.
+ An authentication method of peer_cert
or
+ psk
must be defined. The following options may
+ be specified in the column:
+ remote_ip
local_ip
peer_cert
certificate
option.certificate
private_key
certificate
. If certificate
+ contains the private key, this option may be omitted.psk
in_key
flow
. If
+ flow
is specified then any key will be accepted
+ and the key will be placed in the tun_id
field
+ for matching in the flow table. The ovs-ofctl manual page
+ contains additional information about matching fields in
+ OpenFlow flows. Default is no key.out_key
flow
. If
+ flow
is specified then the key may be set using
+ the set_tunnel
Nicira OpenFlow vendor extension (0
+ is used in the absence of an action). The ovs-ofctl manual
+ page contains additional information about the Nicira OpenFlow
+ vendor extensions. Default is no key.key
in_key
and
+ out_key
at the same time.tos
inherit
, in which case the ToS will be copied from
+ the inner packet if it is IPv4 or IPv6 (otherwise it will be
+ 0). Note that the ECN fields are always inherited. Default is
+ 0.ttl
inherit
, in which case the
+ TTL will be copied from the inner packet if it is IPv4 or IPv6
+ (otherwise it will be the system default, typically 64).
+ Default is the system default TTL.csum
true
to enable.pmtud
false
to disable.capwap
remote_ip
. This could be an internal interface
+ such as a bridge port.
+ openvswitch-ipsec
package for
- Debian. The currently defined key-value pairs are:
- ipsec_local_ip
gre
and the
- ipsec_psk
key must
- be set. The in_key
, out_key
, and
- key
must not be
- set.ipsec_psk
ipsec_local_ip
key must also be set.