X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=vswitchd%2Fovs-vswitchd.8.in;h=24c1c5d3df6f9a26c2633df28c0fb26eff612ce1;hb=a6bc4a03a44ee8a4ab346f0c1a6e21d20a1d29bd;hp=fafc3fe8b681ad7a9592333b8d6ded49035db285;hpb=49c36903d6d65bed96cba31f05534510a21a68d7;p=openvswitch

diff --git a/vswitchd/ovs-vswitchd.8.in b/vswitchd/ovs-vswitchd.8.in
index fafc3fe8..24c1c5d3 100644
--- a/vswitchd/ovs-vswitchd.8.in
+++ b/vswitchd/ovs-vswitchd.8.in
@@ -12,21 +12,26 @@ ovs\-vswitchd \- Open vSwitch daemon
 .
 .SH SYNOPSIS
 .B ovs\-vswitchd
-\fIconfig\fR
+\fIdatabase\fR
 .
 .SH DESCRIPTION
 A daemon that manages and controls any number of Open vSwitch switches 
 on the local machine.
 .PP
-The mandatory \fIconfig\fR argument specifies a configuration file.
-For a description of \fBovs\-vswitchd\fR configuration syntax, see
-\fBovs\-vswitchd.conf\fR(5).
+The mandatory \fIdatabase\fR argument specifies the
+\fBovsdb\-server\fR from which \fBovs\-vswitchd\fR's configuration
+should be retrieved.  It takes one of the following forms:
+.so ovsdb/remote-active.man
+.so ovsdb/remote-passive.man
 .PP
-At startup or upon receipt of a \fBSIGHUP\fR signal, \fBovs\-vswitchd\fR
-reads the configuration file.  It sets up Open vSwitch datapaths and then 
-operates switching across each bridge described in its configuration 
-files.  If a logfile was specified on the command line it will also 
-be opened or reopened.
+\fBovs\-vswitchd\fR retrieves its configuration from \fIdatabase\fR at
+startup.  It sets up Open vSwitch datapaths and then operates
+switching across each bridge described in its configuration files.  As
+the database changes, \fBovs\-vswitchd\fR automatically updates its
+configuration to match.
+.PP
+Upon receipt of a SIGHUP signal, \fBovs\-vswitchd\fR reopens its log
+file, if one was specified on the command line.
 .PP
 \fBovs\-vswitchd\fR switches may be configured with any of the following 
 features:
@@ -70,6 +75,17 @@ Open vSwitch distribution for instructions on how to build and load
 the Open vSwitch kernel module.
 .PP
 .SH OPTIONS
+.IP "\fB--mlockall\fR"
+Causes \fBovs\-vswitchd\fR to call the \fBmlockall()\fR function, to
+attempt to lock all of its process memory into physical RAM,
+preventing the kernel from paging any of its memory to disk.  This
+helps to avoid networking interruptions due to system memory pressure.
+.IP
+Some systems do not support \fBmlockall()\fR at all, and other systems
+only allow privileged users, such as the superuser, to use it.
+\fBovs\-vswitchd\fR emits a log message if \fBmlockall()\fR is
+unavailable or unsuccessful.
+.
 .IP "\fB--fake-proc-net\fR"
 Causes \fBovs\-vswitchd\fR to simulate some files in \fB/proc/net/vlan\fR
 and \fB/proc/net/bonding\fR that some legacy software expects to
@@ -78,6 +94,9 @@ actually in use.  It requires the \fBbrcompat_mod.ko\fR kernel module
 to be loaded.
 .
 .so lib/daemon.man
+.SS "Public Key Infrastructure Options"
+.so lib/ssl.man
+.so lib/ssl-bootstrap.man
 .so lib/vlog.man
 .so lib/common.man
 .so lib/leak-checker.man
@@ -86,16 +105,10 @@ to be loaded.
 \fBovs\-appctl\fR(8) can send commands to a running
 \fBovs\-vswitchd\fR process.  The currently supported commands are
 described below.  The command descriptions assume an understanding of
-how to configure Open vSwitch, as described in
-\fBovs-vswitchd.conf\fR(5).
-.SS "OVS\-VSWITCHD COMMANDS"
-These commands manage the \fBovs-vswitchd\fR process.
-.IP "\fBvswitchd/reload\fR"
-Reloads the \fBovs\-vswitchd\fR configuration file, as if a
-\fBSIGHUP\fR signal were received.  The command completes only after
-reloading is finished, in particular after all datapaths have been
-created and destroyed and ports added and removed as specified by the
-new configuration.
+how to configure Open vSwitch.
+.SS "GENERAL COMMANDS"
+.IP "\fBexit\fR"
+Causes \fBovs\-vswitchd\fR to gracefully terminate.
 .SS "BRIDGE COMMANDS"
 These commands manage bridges.
 .IP "\fBfdb/show\fR \fIbridge\fR"
@@ -157,6 +170,6 @@ Returns the hash value which would be used for \fImac\fR.
 .so lib/vlog-unixctl.man
 .SH "SEE ALSO"
 .BR ovs\-appctl (8),
-.BR ovs\-vswitchd.conf (5),
 .BR ovs\-brcompatd (8),
+.BR ovsdb\-server (1),
 \fBINSTALL.Linux\fR in the Open vSwitch distribution.