X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=utilities%2Fovs-vsctl.8.in;h=ea8a8aadad796a003de6abc1b004458ae5994bcf;hb=10df718e73122df2f3b04ed585e50e4b299a8cbd;hp=3137a847e42ee1a370caf15d66bf5fc15709cc9d;hpb=e111e681e36810ac4c5a87c1428ac243ded0ab23;p=openvswitch

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index 3137a847..ea8a8aad 100644
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -310,22 +310,15 @@ output.
 locally, or it can be configured to connect a given bridge to one or
 more external OpenFlow controllers, such as NOX.
 .
-For each of these commands, a \fIbridge\fR of \fBdefault\fR applies
-the configuration as the default for any bridge that has not been
-explicitly configured.  Otherwise, \fIbridge\fR must name a bridge,
-and the settings apply only to that bridge.  (Omitting \fIbridge\fR
-entirely usually has the same effect as specifying \fBdefault\fR.)
-.
-.IP "\fBget\-controller\fR [\fIbridge\fR]"
+.IP "\fBget\-controller\fR \fIbridge\fR"
 Prints the configured controller target.
 .
-.IP "\fBdel\-controller\fR [\fIbridge\fR]"
+.IP "\fBdel\-controller\fR \fIbridge\fR"
 Deletes the configured controller target.
 .
-.IP "\fBset\-controller\fR [\fIbridge\fR] \fItarget\fR\&..."
-Sets the configured controller target or targets.  If more than one
-\fItarget\fR is specified, then \fIbridge\fR may not be omitted.  Each
-\fItarget\fR may use any of the following forms:
+.IP "\fBset\-controller\fR \fIbridge\fR \fItarget\fR\&..."
+Sets the configured controller target or targets.  Each \fItarget\fR may
+use any of the following forms:
 .
 .RS
 .so lib/vconn-active.man
@@ -352,13 +345,13 @@ it discontinues its standalone behavior.
 If this option is set to \fBsecure\fR, \fBovs\-vswitchd\fR will not
 set up flows on its own when the controller connection fails.
 .
-.IP "\fBget\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBget\-fail\-mode\fR \fIbridge\fR"
 Prints the configured failure mode.
 .
-.IP "\fBdel\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBdel\-fail\-mode\fR \fIbridge\fR"
 Deletes the configured failure mode.
 .
-.IP "\fBset\-fail\-mode\fR [\fIbridge\fR] \fBstandalone\fR|\fBsecure\fR"
+.IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
 Sets the configured failure mode.
 .
 .SS "SSL Configuration"
@@ -450,9 +443,7 @@ A port mirroring configuration attached to a bridge.  Records may be
 identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
-particular bridge may be identified by the bridge's name.  The default
-controller controller for an Open vSwitch may be identified by
-specifying \fB.\fR as the record name.
+particular bridge may be identified by the bridge's name.
 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.