X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=utilities%2Fovs-vsctl.8.in;h=cd83d0a29ffd049872a98f4e7ca9a969295a207e;hb=b1cd4308bcaad248bcb4713b08911d702cd29007;hp=d88399da0fae2bdae915c376a480eafcafa2b01a;hpb=c9f3f37a9d3eeac3740122569ec96c3658b615df;p=openvswitch

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index d88399da..cd83d0a2 100644
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -299,13 +299,14 @@ output.
 .SS "OpenFlow Controller Connectivity"
 .
 \fBovs\-vswitchd\fR can perform all configured bridging and switching
-locally, or it can be configured to connect a given bridge to an
-external OpenFlow controller, such as NOX.  
+locally, or it can be configured to connect a given bridge to one or
+more external OpenFlow controllers, such as NOX.
 .
-If a \fIbridge\fR argument is given, the settings apply only to the
-specified bridge.  Otherwise, they apply to the Open vSwitch instance,
-and its configuration applies to any bridge that has not been explicitly
-configured through a \fIbridge\fR argument.
+For each of these commands, a \fIbridge\fR of \fBdefault\fR applies
+the configuration as the default for any bridge that has not been
+explicitly configured.  Otherwise, \fIbridge\fR must name a bridge,
+and the settings apply only to that bridge.  (Omitting \fIbridge\fR
+entirely usually has the same effect as specifying \fBdefault\fR.)
 .
 .IP "\fBget\-controller\fR [\fIbridge\fR]"
 Prints the configured controller target.
@@ -313,9 +314,10 @@ Prints the configured controller target.
 .IP "\fBdel\-controller\fR [\fIbridge\fR]"
 Deletes the configured controller target.
 .
-.IP "\fBset\-controller\fR [\fIbridge\fR] \fItarget\fR"
-Sets the configured controller target.  The \fItarget\fR may use any of
-the following forms:
+.IP "\fBset\-controller\fR [\fIbridge\fR] \fItarget\fR\&..."
+Sets the configured controller target or targets.  If more than one
+\fItarget\fR is specified, then \fIbridge\fR may not be omitted.  Each
+\fItarget\fR may use any of the following forms:
 .
 .RS
 .so lib/vconn-active.man
@@ -449,7 +451,7 @@ identified by bridge name.
 .PP
 Names of tables, records, and columns are not case-sensitive, and
 \fB--\fR and \fB_\fR are treated interchangeably.  Unique
-abbreviations are acceptable, e.g. \fBnet\fR or \fRn\fR is sufficient
+abbreviations are acceptable, e.g. \fBnet\fR or \fBn\fR is sufficient
 to identify the \fBNetFlow\fR table.
 .
 .ST "Database Values"
@@ -545,7 +547,7 @@ Sets each \fIcolumn\fR in \fIrecord\fR in \fItable\fR to the empty set
 or empty map, as appropriate.  This command applies only to columns
 that are allowed to be empty.
 .
-.IP "create \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
+.IP "\fBcreate\fR \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
 Creates a new record in \fItable\fR and sets the initial values of
 each \fIcolumn\fR.  Columns not explicitly set will receive their
 default values.  Outputs the UUID of the new row.