X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=utilities%2Fovs-dpctl.8.in;h=dc4d4568182180fe4adbb2413e306d7e0e96bf39;hb=675febfa2f31372e45e2a6a28ce19256b22106d7;hp=c43d4ffa013af746e081d2aed37a3c26d246b631;hpb=f7ef6533d8e48565f21a67021e8477b6f5a59ae3;p=openvswitch

diff --git a/utilities/ovs-dpctl.8.in b/utilities/ovs-dpctl.8.in
index c43d4ffa..dc4d4568 100644
--- a/utilities/ovs-dpctl.8.in
+++ b/utilities/ovs-dpctl.8.in
@@ -1,4 +1,4 @@
-.TH ovs\-dpctl 8 "March 2009" "Open vSwitch" "Open vSwitch Manual"
+.TH ovs\-dpctl 8 "August 2009" "Open vSwitch" "Open vSwitch Manual"
 .ds PN ovs\-dpctl
 
 .SH NAME
@@ -70,11 +70,6 @@ A \fInetdev\fR may be followed by a comma-separated list of options.
 The following options are currently supported:
 
 .RS
-.IP "\fBport=\fIportno\fR"
-Specifies \fIportno\fR (a number between 1 and 255) as the port number
-at which \fInetdev\fR will be attached.  By default, \fBadd\-if\fR
-automatically selects the lowest available port number.
-
 .IP "\fBinternal\fR"
 Instead of attaching an existing \fInetdev\fR, creates an internal
 port (analogous to the local port) with that name.
@@ -85,6 +80,10 @@ port (analogous to the local port) with that name.
 Removes each \fInetdev\fR from the list of network devices datapath
 \fIdp\fR monitors.
 
+.TP
+\fBdump-dps\fR
+Prints the name of each configured datapath on a separate line.
+
 .TP
 \fBshow \fR[\fIdp\fR...]
 Prints a summary of configured datapaths, including their datapath
@@ -115,9 +114,10 @@ up may be confused about their disappearance.
 .IP "\fBdump-groups \fIdp\fR"
 Prints to the console the sets of port groups maintained by datapath
 \fIdp\fR.  Ordinarily there are at least 2 port groups in a datapath
-that \fBsecchan\fR or \fBvswitch\fR is controlling: group 0 contains
+that \fBovs\-openflowd\fR or \fBovs\-vswitch\fR is controlling: group
+0 contains
 all ports except those disabled by STP, and group 1 contains all
-ports.  Additional groups might be used in the future.
+ports.  Additional or different groups might be used in the future.
 
 This command is primarily useful for debugging Open vSwitch.  OpenFlow
 does not have a concept of port groups.
@@ -146,7 +146,7 @@ Creates datapath number 0.
 Adds two network devices to the new datapath.
 
 .PP
-At this point one would ordinarily start \fBsecchan\fR(8) on
+At this point one would ordinarily start \fBovs\-openflowd\fR(8) on
 \fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch.  Then, when
 the switch and the datapath is no longer needed:
 
@@ -160,6 +160,6 @@ Deletes the datapath.
 
 .SH "SEE ALSO"
 
-.BR secchan (8),
 .BR ovs\-appctl (8),
+.BR ovs\-openflowd (8),
 .BR ovs\-vswitchd (8)