X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=utilities%2Fovs-dpctl.8.in;h=12fa27bfa69534af895e4c252f5179ef7c09c92e;hb=40a09c8aa9577d0d099eb5bbcb5ef69800e9e6f0;hp=b7965bc37b08f9551bf4e8ed8dc42914be9e0a13;hpb=4e312e694f1e9e34ed0aad7d5778b73d7add270d;p=openvswitch

diff --git a/utilities/ovs-dpctl.8.in b/utilities/ovs-dpctl.8.in
index b7965bc3..12fa27bf 100644
--- a/utilities/ovs-dpctl.8.in
+++ b/utilities/ovs-dpctl.8.in
@@ -21,29 +21,22 @@ host's other network devices.  To intercept and process traffic on a
 given network device, use the \fBadd\-if\fR command to explicitly add
 that network device to the datapath.
 .PP
-Do not use \fBovs\-dpctl\fR commands to modify datapaths if
-\fBovs\-vswitchd\fR(8) is in use.  Instead, modify the
-\fBovs\-vswitchd\fR configuration file and send \fBSIGHUP\fR to the
-\fBovs\-vswitchd\fR process.
+If \fBovs\-vswitchd\fR(8) is in use, use \fBovs\-vsctl\fR(8) instead
+of \fBovs\-dpctl\fR.
 .PP
-Most \fBovs\-dpctl\fR commands that work with datapaths take an argument
-that specifies the name of the datapath, in one of the following
-forms:
-.so lib/dpif.man
+Most \fBovs\-dpctl\fR commands that work with datapaths take an
+argument that specifies the name of the datapath.  Datapath names take
+the form [\fItype\fB@\fR]\fIname\fR, where \fIname\fR is the network
+device associated with the datapath's local port.  If \fItype\fR is
+given, it specifies the datapath provider of \fIname\fR, otherwise the
+default provider \fBsystem\fR is assumed.
 .PP
 The following commands manage datapaths.
 .
 .TP
 \fBadd\-dp \fIdp\fR [\fInetdev\fR...]
-Creates datapath \fIdp\fR.  The name of the new datapath's local port
-depends on how \fIdp\fR is specified: if it takes the form
-\fBdp\fIN\fR, the local port will be named \fBdp\fIN\fR; otherwise,
-the local port's name will be \fIdp\fR.
-.IP
-This will fail if the host already has 256 datapaths, if a network
-device with the same name as the new datapath's local port already
-exists, or if \fIdp\fR is given in the form \fBdp\fIN\fR
-and a datapath numbered \fIN\fR already exists.
+Creates datapath \fIdp\fR, with a local port also named \fIdp\fR.
+This will fail if a network device \fIdp\fR already exists.
 .IP
 If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
 .
@@ -66,10 +59,14 @@ A \fInetdev\fR may be followed by a comma-separated list of options.
 The following options are currently supported:
 .
 .RS
-.IP "\fBinternal\fR"
-Instead of attaching an existing \fInetdev\fR, creates an internal
-port (analogous to the local port) with that name.
+.IP "\fBtype=\fItype\fR"
+Specifies the type of port to add.  The default type is \fBsystem\fR.
+.IP "\fIkey\fB=\fIvalue\fR"
+Adds an arbitrary key-value option to the port's configuration.
 .RE
+.IP
+\fBovs\-vswitchd.conf.db\fR(5) documents the available port types and
+options.
 .
 .TP
 \fBdel\-if \fIdp netdev\fR...
@@ -106,16 +103,6 @@ discussed in \fBdump\-flows\fR, these entries are
 not OpenFlow flow entries.  By deleting them, the process that set them
 up may be confused about their disappearance.
 .
-.IP "\fBdump\-groups \fIdp\fR"
-Prints to the console the sets of port groups maintained by datapath
-\fIdp\fR.  Ordinarily there are at least 2 port groups in a datapath
-that \fBovs\-openflowd\fR or \fBovs\-vswitch\fR is controlling: group
-0 contains
-all ports except those disabled by STP, and group 1 contains all
-ports.  Additional or different groups might be used in the future.
-.IP
-This command is primarily useful for debugging Open vSwitch.  OpenFlow
-does not have a concept of port groups.
 .SH OPTIONS
 .TP
 \fB\-t\fR, \fB\-\-timeout=\fIsecs\fR