X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=include%2Fopenvswitch%2Fdatapath-protocol.h;h=e7708ef17bf8a3564ce2f52cf2934f24d18a5024;hb=27a325164faa2539ce9b713a250fc3c5a7f2e40d;hp=39a3365f44feb3e12b9f1864b0a48e6cec5f66d3;hpb=aaff4b55a7992ac47a143abb6bffac5c931f073a;p=openvswitch diff --git a/include/openvswitch/datapath-protocol.h b/include/openvswitch/datapath-protocol.h index 39a3365f..e7708ef1 100644 --- a/include/openvswitch/datapath-protocol.h +++ b/include/openvswitch/datapath-protocol.h @@ -37,19 +37,9 @@ * ---------------------------------------------------------------------- */ -/* Protocol between userspace and kernel datapath. - * - * Be sure to update datapath/odp-compat.h if you change any of the structures - * in here. */ - #ifndef OPENVSWITCH_DATAPATH_PROTOCOL_H #define OPENVSWITCH_DATAPATH_PROTOCOL_H 1 -/* The ovs_be types indicate that an object is in big-endian, not - * native-endian, byte order. They are otherwise equivalent to uint_t. - * The Linux kernel already has __be types for this, which take on - * additional semantics when the "sparse" static checker is used, so we use - * those types when compiling the kernel. */ #ifdef __KERNEL__ #include #include @@ -61,29 +51,10 @@ #include #endif -#ifndef __aligned_u64 -#define __aligned_u64 __u64 __attribute__((aligned(8))) -#define __aligned_be64 __be64 __attribute__((aligned(8))) -#define __aligned_le64 __le64 __attribute__((aligned(8))) -#endif - #include #include - -#define ODP_VPORT_NEW _IOR('O', 7, struct odp_vport) -#define ODP_VPORT_DEL _IOR('O', 8, struct odp_vport) -#define ODP_VPORT_GET _IOWR('O', 9, struct odp_vport) -#define ODP_VPORT_SET _IOR('O', 22, struct odp_vport) -#define ODP_VPORT_DUMP _IOWR('O', 10, struct odp_vport) - -#define ODP_FLOW_NEW _IOWR('O', 13, struct odp_flow) -#define ODP_FLOW_DEL _IOWR('O', 14, struct odp_flow) -#define ODP_FLOW_GET _IOWR('O', 15, struct odp_flow) -#define ODP_FLOW_SET _IOWR('O', 16, struct odp_flow) -#define ODP_FLOW_DUMP _IOWR('O', 17, struct odp_flow) -#define ODP_FLOW_FLUSH _IO('O', 19) -/* Datapaths. */ +/* datapaths. */ #define ODP_DATAPATH_FAMILY "odp_datapath" #define ODP_DATAPATH_MCGROUP "odp_datapath" @@ -98,22 +69,23 @@ enum odp_datapath_cmd { /** * struct odp_header - header for ODP Generic Netlink messages. - * @dp_idx: Number of datapath to which the packet belongs. + * @dp_ifindex: ifindex of local port for datapath (0 to make a request not + * specific to a datapath). * * Attributes following the header are specific to a particular ODP Generic * Netlink family, but all of the ODP families use this header. */ struct odp_header { - uint32_t dp_idx; + int dp_ifindex; }; /** * enum odp_datapath_attr - attributes for %ODP_DP_* commands. * @ODP_DP_ATTR_NAME: Name of the network device that serves as the "local - * port". This is the name of the network device whose dp_idx is given in the - * &struct odp_header. Always present in notifications. Required in - * %ODP_DP_NEW requests. May be used as an alternative to specifying dp_idx on - * other requests (with a dp_idx of %UINT32_MAX). + * port". This is the name of the network device whose dp_ifindex is given in + * the &struct odp_header. Always present in notifications. Required in + * %ODP_DP_NEW requests. May be used as an alternative to specifying + * dp_ifindex in other requests (with a dp_ifindex of 0). * @ODP_DP_ATTR_STATS: Statistics about packets that have passed through the * datapath. Always present in notifications. * @ODP_DP_ATTR_IPV4_FRAGS: One of %ODP_DP_FRAG_*. Always present in @@ -133,7 +105,7 @@ struct odp_header { */ enum odp_datapath_attr { ODP_DP_ATTR_UNSPEC, - ODP_DP_ATTR_NAME, /* name of dp_ifidx netdev */ + ODP_DP_ATTR_NAME, /* name of dp_ifindex netdev */ ODP_DP_ATTR_STATS, /* struct odp_stats */ ODP_DP_ATTR_IPV4_FRAGS, /* 32-bit enum odp_frag_handling */ ODP_DP_ATTR_SAMPLING, /* 32-bit fraction of packets to sample. */ @@ -173,7 +145,7 @@ enum odp_packet_cmd { /* Kernel-to-user notifications. */ ODP_PACKET_CMD_MISS, /* Flow table miss. */ - ODP_PACKET_CMD_ACTION, /* ODPAT_CONTROLLER action. */ + ODP_PACKET_CMD_ACTION, /* ODP_ACTION_ATTR_CONTROLLER action. */ ODP_PACKET_CMD_SAMPLE, /* Sampled packet. */ /* User commands. */ @@ -185,18 +157,20 @@ enum odp_packet_cmd { * @ODP_PACKET_ATTR_PACKET: Present for all notifications. Contains the entire * packet as received, from the start of the Ethernet header onward. For * %ODP_PACKET_CMD_ACTION, %ODP_PACKET_ATTR_PACKET reflects changes made by - * actions preceding %ODPAT_CONTROLLER, but %ODP_PACKET_ATTR_KEY is the flow - * key extracted from the packet as originally received. + * actions preceding %ODP_ACTION_ATTR_CONTROLLER, but %ODP_PACKET_ATTR_KEY is + * the flow key extracted from the packet as originally received. * @ODP_PACKET_ATTR_KEY: Present for all notifications. Contains the flow key * extracted from the packet as nested %ODP_KEY_ATTR_* attributes. This allows * userspace to adapt its flow setup strategy by comparing its notion of the * flow key against the kernel's. * @ODP_PACKET_ATTR_USERDATA: Present for an %ODP_PACKET_CMD_ACTION - * notification if the %ODPAT_CONTROLLER action's argument was nonzero. + * notification if the %ODP_ACTION_ATTR_CONTROLLER, action's argument was + * nonzero. * @ODP_PACKET_ATTR_SAMPLE_POOL: Present for %ODP_PACKET_CMD_SAMPLE. Contains * the number of packets processed so far that were candidates for sampling. * @ODP_PACKET_ATTR_ACTIONS: Present for %ODP_PACKET_CMD_SAMPLE. Contains a - * copy of the actions applied to the packet, as nested %ODPAT_* attributes. + * copy of the actions applied to the packet, as nested %ODP_ACTION_ATTR_* + * attributes. * * These attributes follow the &struct odp_header within the Generic Netlink * payload for %ODP_PACKET_* commands. @@ -205,9 +179,9 @@ enum odp_packet_attr { ODP_PACKET_ATTR_UNSPEC, ODP_PACKET_ATTR_PACKET, /* Packet data. */ ODP_PACKET_ATTR_KEY, /* Nested ODP_KEY_ATTR_* attributes. */ - ODP_PACKET_ATTR_USERDATA, /* 64-bit data from ODPAT_CONTROLLER. */ + ODP_PACKET_ATTR_USERDATA, /* u64 ODP_ACTION_ATTR_CONTROLLER arg. */ ODP_PACKET_ATTR_SAMPLE_POOL, /* # sampling candidate packets so far. */ - ODP_PACKET_ATTR_ACTIONS, /* Nested ODPAT_* attributes. */ + ODP_PACKET_ATTR_ACTIONS, /* Nested ODP_ACTION_ATTR_* attributes. */ __ODP_PACKET_ATTR_MAX }; @@ -224,24 +198,54 @@ enum odp_vport_type { }; #define ODP_VPORT_TYPE_MAX (__ODP_VPORT_TYPE_MAX - 1) + +#define ODP_VPORT_FAMILY "odp_vport" +#define ODP_VPORT_MCGROUP "odp_vport" + +enum odp_vport_cmd { + ODP_VPORT_CMD_UNSPEC, + ODP_VPORT_CMD_NEW, + ODP_VPORT_CMD_DEL, + ODP_VPORT_CMD_GET, + ODP_VPORT_CMD_SET +}; /** - * struct odp_vport - header with basic information about a virtual port. - * @dp_idx: Number of datapath to which the vport belongs. - * @len: Length of this structure plus the Netlink attributes following it. - * @total_len: Total space available for kernel reply to request. + * enum odp_vport_attr - attributes for %ODP_VPORT_* commands. + * @ODP_VPORT_ATTR_PORT_NO: 32-bit port number within datapath. + * @ODP_VPORT_ATTR_TYPE: 32-bit %ODP_VPORT_TYPE_* constant describing the type + * of vport. + * @ODP_VPORT_ATTR_NAME: Name of vport. For a vport based on a network device + * this is the name of the network device. Maximum length %IFNAMSIZ-1 bytes + * plus a null terminator. + * @ODP_VPORT_ATTR_STATS: A &struct rtnl_link_stats64 giving statistics for + * packets sent or received through the vport. + * @ODP_VPORT_ATTR_ADDRESS: A 6-byte Ethernet address for the vport. + * @ODP_VPORT_ATTR_MTU: MTU for the vport. Omitted if the vport does not have + * an MTU as, e.g., some tunnels do not. + * @ODP_VPORT_ATTR_IFINDEX: ifindex of the underlying network device, if any. + * @ODP_VPORT_ATTR_IFLINK: ifindex of the device on which packets are sent (for + * tunnels), if any. * - * Followed by &struct nlattr attributes, whose types are drawn from - * %ODP_VPORT_ATTR_*, up to a length of @len bytes including the &struct - * odp_vport header. + * These attributes follow the &struct odp_header within the Generic Netlink + * payload for %ODP_VPORT_* commands. + * + * All attributes applicable to a given port are present in notifications. + * This means that, for example, a vport that has no corresponding network + * device would omit %ODP_VPORT_ATTR_IFINDEX. + * + * For %ODP_VPORT_CMD_NEW requests, the %ODP_VPORT_ATTR_TYPE and + * %ODP_VPORT_ATTR_NAME attributes are required. %ODP_VPORT_ATTR_PORT_NO is + * optional; if not specified a free port number is automatically selected. + * Whether %ODP_VPORT_ATTR_OPTIONS is required or optional depends on the type + * of vport. %ODP_VPORT_ATTR_STATS, %ODP_VPORT_ATTR_ADDRESS, and + * %ODP_VPORT_ATTR_MTU are optional, and other attributes are ignored. + * + * For other requests, if %ODP_VPORT_ATTR_NAME is specified then it is used to + * look up the vport to operate on; otherwise dp_idx from the &struct + * odp_header plus %ODP_VPORT_ATTR_PORT_NO determine the vport. */ -struct odp_vport { - uint32_t dp_idx; - uint32_t len; - uint32_t total_len; -}; - -enum { +enum odp_vport_attr { ODP_VPORT_ATTR_UNSPEC, ODP_VPORT_ATTR_PORT_NO, /* port number within datapath */ ODP_VPORT_ATTR_TYPE, /* 32-bit ODP_VPORT_TYPE_* constant. */ @@ -265,6 +269,19 @@ enum { }; #define ODP_PATCH_ATTR_MAX (__ODP_PATCH_ATTR_MAX - 1) + +/* Flows. */ + +#define ODP_FLOW_FAMILY "odp_flow" +#define ODP_FLOW_MCGROUP "odp_flow" + +enum odp_flow_cmd { + ODP_FLOW_CMD_UNSPEC, + ODP_FLOW_CMD_NEW, + ODP_FLOW_CMD_DEL, + ODP_FLOW_CMD_GET, + ODP_FLOW_CMD_SET +}; struct odp_flow_stats { uint64_t n_packets; /* Number of matched packets. */ @@ -279,10 +296,13 @@ enum odp_key_type { ODP_KEY_ATTR_8021Q, /* struct odp_key_8021q */ ODP_KEY_ATTR_ETHERTYPE, /* 16-bit Ethernet type */ ODP_KEY_ATTR_IPV4, /* struct odp_key_ipv4 */ + ODP_KEY_ATTR_IPV6, /* struct odp_key_ipv6 */ ODP_KEY_ATTR_TCP, /* struct odp_key_tcp */ ODP_KEY_ATTR_UDP, /* struct odp_key_udp */ ODP_KEY_ATTR_ICMP, /* struct odp_key_icmp */ + ODP_KEY_ATTR_ICMPV6, /* struct odp_key_icmpv6 */ ODP_KEY_ATTR_ARP, /* struct odp_key_arp */ + ODP_KEY_ATTR_ND, /* struct odp_key_nd */ __ODP_KEY_ATTR_MAX }; @@ -305,6 +325,13 @@ struct odp_key_ipv4 { uint8_t ipv4_tos; }; +struct odp_key_ipv6 { + ovs_be32 ipv6_src[4]; + ovs_be32 ipv6_dst[4]; + uint8_t ipv6_proto; + uint8_t ipv6_tos; +}; + struct odp_key_tcp { ovs_be16 tcp_src; ovs_be16 tcp_dst; @@ -320,38 +347,59 @@ struct odp_key_icmp { uint8_t icmp_code; }; +struct odp_key_icmpv6 { + uint8_t icmpv6_type; + uint8_t icmpv6_code; +}; + struct odp_key_arp { ovs_be32 arp_sip; ovs_be32 arp_tip; ovs_be16 arp_op; + uint8_t arp_sha[6]; + uint8_t arp_tha[6]; +}; + +struct odp_key_nd { + uint32_t nd_target[4]; + uint8_t nd_sll[6]; + uint8_t nd_tll[6]; }; /** - * struct odp_flow - header with basic information about a flow. - * @dp_idx: Datapath index. - * @len: Length of this structure plus the Netlink attributes following it. - * @total_len: Total space available for kernel reply to request. + * enum odp_flow_attr - attributes for %ODP_FLOW_* commands. + * @ODP_FLOW_ATTR_KEY: Nested %ODP_KEY_ATTR_* attributes specifying the flow + * key. Always present in notifications. Required for all requests (except + * dumps). + * @ODP_FLOW_ATTR_ACTIONS: Nested %ODPAT_* attributes specifying the actions to + * take for packets that match the key. Always present in notifications. + * Required for %ODP_FLOW_CMD_NEW requests, optional on %ODP_FLOW_CMD_SET + * request to change the existing actions, ignored for other requests. + * @ODP_FLOW_ATTR_STATS: &struct odp_flow_stats giving statistics for this + * flow. Present in notifications if the stats would be nonzero. Ignored in + * requests. + * @ODP_FLOW_ATTR_TCP_FLAGS: An 8-bit value giving the OR'd value of all of the + * TCP flags seen on packets in this flow. Only present in notifications for + * TCP flows, and only if it would be nonzero. Ignored in requests. + * @ODP_FLOW_ATTR_USED: A 64-bit integer giving the time, in milliseconds on + * the system monotonic clock, at which a packet was last processed for this + * flow. Only present in notifications if a packet has been processed for this + * flow. Ignored in requests. + * @ODP_FLOW_ATTR_CLEAR: If present in a %ODP_FLOW_CMD_SET request, clears the + * last-used time, accumulated TCP flags, and statistics for this flow. + * Otherwise ignored in requests. Never present in notifications. * - * Followed by &struct nlattr attributes, whose types are drawn from - * %ODP_FLOW_ATTR_*, up to a length of @len bytes including the &struct - * odp_flow header. + * These attributes follow the &struct odp_header within the Generic Netlink + * payload for %ODP_FLOW_* commands. */ -struct odp_flow { - uint32_t nlmsg_flags; - uint32_t dp_idx; - uint32_t len; - uint32_t total_len; -}; - -enum odp_flow_type { +enum odp_flow_attr { ODP_FLOW_ATTR_UNSPEC, ODP_FLOW_ATTR_KEY, /* Sequence of ODP_KEY_ATTR_* attributes. */ - ODP_FLOW_ATTR_ACTIONS, /* Sequence of nested ODPAT_* attributes. */ + ODP_FLOW_ATTR_ACTIONS, /* Nested ODP_ACTION_ATTR_* attributes. */ ODP_FLOW_ATTR_STATS, /* struct odp_flow_stats. */ ODP_FLOW_ATTR_TCP_FLAGS, /* 8-bit OR'd TCP flags. */ ODP_FLOW_ATTR_USED, /* u64 msecs last used in monotonic time. */ ODP_FLOW_ATTR_CLEAR, /* Flag to clear stats, tcp_flags, used. */ - ODP_FLOW_ATTR_STATE, /* u64 state for ODP_FLOW_DUMP. */ __ODP_FLOW_ATTR_MAX }; @@ -359,25 +407,24 @@ enum odp_flow_type { /* Action types. */ enum odp_action_type { - ODPAT_UNSPEC, - ODPAT_OUTPUT, /* Output to switch port. */ - ODPAT_CONTROLLER, /* Send copy to controller. */ - ODPAT_SET_DL_TCI, /* Set the 802.1q TCI value. */ - ODPAT_STRIP_VLAN, /* Strip the 802.1q header. */ - ODPAT_SET_DL_SRC, /* Ethernet source address. */ - ODPAT_SET_DL_DST, /* Ethernet destination address. */ - ODPAT_SET_NW_SRC, /* IPv4 source address. */ - ODPAT_SET_NW_DST, /* IPv4 destination address. */ - ODPAT_SET_NW_TOS, /* IP ToS/DSCP field (6 bits). */ - ODPAT_SET_TP_SRC, /* TCP/UDP source port. */ - ODPAT_SET_TP_DST, /* TCP/UDP destination port. */ - ODPAT_SET_TUNNEL, /* Set the encapsulating tunnel ID. */ - ODPAT_SET_PRIORITY, /* Set skb->priority. */ - ODPAT_POP_PRIORITY, /* Restore original skb->priority. */ - ODPAT_DROP_SPOOFED_ARP, /* Drop ARPs with spoofed source MAC. */ - __ODPAT_MAX + ODP_ACTION_ATTR_UNSPEC, + ODP_ACTION_ATTR_OUTPUT, /* Output to switch port. */ + ODP_ACTION_ATTR_CONTROLLER, /* Send copy to controller. */ + ODP_ACTION_ATTR_SET_DL_TCI, /* Set the 802.1q TCI value. */ + ODP_ACTION_ATTR_STRIP_VLAN, /* Strip the 802.1q header. */ + ODP_ACTION_ATTR_SET_DL_SRC, /* Ethernet source address. */ + ODP_ACTION_ATTR_SET_DL_DST, /* Ethernet destination address. */ + ODP_ACTION_ATTR_SET_NW_SRC, /* IPv4 source address. */ + ODP_ACTION_ATTR_SET_NW_DST, /* IPv4 destination address. */ + ODP_ACTION_ATTR_SET_NW_TOS, /* IP ToS/DSCP field (6 bits). */ + ODP_ACTION_ATTR_SET_TP_SRC, /* TCP/UDP source port. */ + ODP_ACTION_ATTR_SET_TP_DST, /* TCP/UDP destination port. */ + ODP_ACTION_ATTR_SET_TUNNEL, /* Set the encapsulating tunnel ID. */ + ODP_ACTION_ATTR_SET_PRIORITY, /* Set skb->priority. */ + ODP_ACTION_ATTR_POP_PRIORITY, /* Restore original skb->priority. */ + __ODP_ACTION_ATTR_MAX }; -#define ODPAT_MAX (__ODPAT_MAX - 1) +#define ODP_ACTION_ATTR_MAX (__ODP_ACTION_ATTR_MAX - 1) #endif /* openvswitch/datapath-protocol.h */