X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=doc%2Fdata-io.texi;h=9341a58c8a794a06edf59cf1c9615b546dd38220;hb=bcbd6d906bd2e5f6ae72c5bdaa6900735f51c4e3;hp=da1712e3d46a7b9c322cf772aeb337f895096617;hpb=2814862a2c45a39f9822cf4c64ca3884822d064d;p=pspp diff --git a/doc/data-io.texi b/doc/data-io.texi index da1712e3d4..9341a58c8a 100644 --- a/doc/data-io.texi +++ b/doc/data-io.texi @@ -1,3 +1,12 @@ +@c PSPP - a program for statistical analysis. +@c Copyright (C) 2017 Free Software Foundation, Inc. +@c Permission is granted to copy, distribute and/or modify this document +@c under the terms of the GNU Free Documentation License, Version 1.3 +@c or any later version published by the Free Software Foundation; +@c with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. +@c A copy of the license is included in the section entitled "GNU +@c Free Documentation License". +@c @c (modify-syntax-entry ?_ "w") @c (modify-syntax-entry ?' "'") @c (modify-syntax-entry ?@ "'") @@ -39,6 +48,7 @@ actually be read until a procedure is executed. * INPUT PROGRAM:: Support for complex input programs. * LIST:: List cases in the active dataset. * NEW FILE:: Clear the active dataset. +* MATRIX DATA:: Defining matrix material for procedures. * PRINT:: Display values in print formats. * PRINT EJECT:: Eject the current page then print. * PRINT SPACE:: Print blank lines. @@ -484,7 +494,10 @@ where each @var{var_spec} takes one of the forms @end display In free format, the input data is, by default, structured as a series -of fields separated by spaces, tabs, commas, or line breaks. Each +of fields separated by spaces, tabs, or line breaks. +If the current @subcmd{DECIMAL} separator is @subcmd{DOT} (@pxref{SET}), +then commas are also treated as field separators. +Each field's content may be unquoted, or it may be quoted with a pairs of apostrophes (@samp{'}) or double quotes (@samp{"}). Unquoted white space separates fields but is not part of any field. Any mix of @@ -573,6 +586,7 @@ For text files: FILE HANDLE @var{handle_name} /NAME='@var{file_name} [/MODE=CHARACTER] + [/ENDS=@{CR,CRLF@}] /TABWIDTH=@var{tab_width} [ENCODING='@var{encoding}'] @@ -619,9 +633,8 @@ The effect and syntax of @cmd{FILE HANDLE} depends on the selected MODE: @itemize @item -In CHARACTER mode, the default, the data file is read as a text file, -according to the local system's conventions, and each text line is -read as one record. +In CHARACTER mode, the default, the data file is read as a text file. +Each text line is read as one record. In CHARACTER mode only, tabs are expanded to spaces by input programs, except by @cmd{DATA LIST FREE} with explicitly specified delimiters. @@ -629,6 +642,12 @@ Each tab is 4 characters wide by default, but TABWIDTH (a @pspp{} extension) may be used to specify an alternate width. Use a TABWIDTH of 0 to suppress tab expansion. +A file written in CHARACTER mode by default uses the line ends of the +system on which PSPP is running, that is, on Windows, the default is +CR LF line ends, and on other systems the default is LF only. Specify +ENDS as CR or CRLF to override the default. PSPP reads files using +either convention on any kind of system, regardless of ENDS. + @item In IMAGE mode, the data file is treated as a series of fixed-length binary records. LRECL should be used to specify the record length in @@ -789,6 +808,9 @@ so an infinite loop results. @cmd{END FILE}, when executed, stops the flow of input data and passes out of the @cmd{INPUT PROGRAM} structure. +@cmd{INPUT PROGRAM} must contain at least one @cmd{DATA LIST} or +@cmd{END FILE} command. + All this is very confusing. A few examples should help to clarify. @c If you change this example, change the regression test1 in @@ -933,10 +955,6 @@ currently not used. Case numbers start from 1. They are counted after all transformations have been considered. -@cmd{LIST} attempts to fit all the values on a single line. If needed -to make them fit, variable names are displayed vertically. If values -cannot fit on a single line, then a multi-line format will be used. - @cmd{LIST} is a procedure. It causes the data to be read. @node NEW FILE @@ -950,6 +968,160 @@ NEW FILE. @cmd{NEW FILE} command clears the dictionary and data from the current active dataset. +@node MATRIX DATA +@section MATRIX DATA +@vindex MATRIX DATA + +@display +MATRIX DATA + VARIABLES = @var{columns} + [FILE='@var{file_name}'| INLINE @} + [/FORMAT= [@{LIST | FREE@}] + [@{UPPER | LOWER | FULL@}] + [@{DIAGONAL | NODIAGONAL@}]] + [/N= @var{n}] + [/SPLIT= @var{split_variables}]. +@end display + +The @cmd{MATRIX DATA} command is used to input data in the form of matrices +which can subsequently be used by other commands. If the +@subcmd{FILE} is omitted or takes the value @samp{INLINE} then the command +should immediately followed by @cmd{BEGIN DATA}, @xref{BEGIN DATA}. + +There is one mandatory subcommand, @i{viz:} @subcmd{VARIABLES}, which defines +the @var{columns} of the matrix. +Normally, the @var{columns} should include an item called @samp{ROWTYPE_}. +The @samp{ROWTYPE_} column is used to specify the purpose of a row in the +matrix. + +@example +matrix data + variables = rowtype_ var01 TO var08. + +begin data. +mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7 +sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5 +n 92 92 92 92 92 92 92 92 +corr 1.00 +corr .18 1.00 +corr -.22 -.17 1.00 +corr .36 .31 -.14 1.00 +corr .27 .16 -.12 .22 1.00 +corr .33 .15 -.17 .24 .21 1.00 +corr .50 .29 -.20 .32 .12 .38 1.00 +corr .17 .29 -.05 .20 .27 .20 .04 1.00 +end data. +@end example + +In the above example, the first three rows have ROWTYPE_ values of +@samp{mean}, @samp{sd}, and @samp{n}. These indicate that the rows +contain mean values, standard deviations and counts, respectively. +All subsequent rows have a ROWTYPE_ of @samp{corr} which indicates +that the values are correlation coefficients. + +Note that in this example, the upper right values of the @samp{corr} +values are blank, and in each case, the rightmost value is unity. +This is because, the +@subcmd{FORMAT} subcommand defaults to @samp{LOWER DIAGONAL}, +which indicates that only the lower triangle is provided in the data. +The opposite triangle is automatically inferred. One could instead +specify the upper triangle as follows: + + +@example +matrix data + variables = rowtype_ var01 TO var08 + /format = upper nodiagonal. + +begin data. +mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7 +sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5 +n 92 92 92 92 92 92 92 92 +corr .17 .50 -.33 .27 .36 -.22 .18 +corr .29 .29 -.20 .32 .12 .38 +corr .05 .20 -.15 .16 .21 +corr .20 .32 -.17 .12 +corr .27 .12 -.24 +corr -.20 -.38 +corr .04 +end data. +@end example + +In this example the @samp{NODIAGONAL} keyword is used. Accordingly +the diagonal values of the matrix are omitted. This implies that +there is one less @samp{corr} line than there are variables. +If the @samp{FULL} option is passed to the @subcmd{FORMAT} subcommand, +then all the matrix elements must be provided, including the diagonal +elements. + +In the preceding examples, each matrix row has been specified on a +single line. If you pass the keyword @var{FREE} to @subcmd{FORMAT} +then the data may be data for several matrix rows may be specified on +the same line, or a single row may be split across lines. + +The @subcmd{N} subcommand may be used to specify the number +of valid cases for each variable. It should not be used if the +data contains a record whose ROWTYPE_ column is @samp{N} or @samp{N_VECTOR}. +It implies a @samp{N} record whose values are all @var{n}. +That is to say, +@example +matrix data + variables = rowtype_ var01 TO var04 + /format = upper nodiagonal + /n = 99. +begin data +mean 34 35 36 37 +sd 22 11 55 66 +corr 9 8 7 +corr 6 5 +corr 4 +end data. +@end example +produces an effect identical to +@example +matrix data + variables = rowtype_ var01 TO var04 + /format = upper nodiagonal +begin data +n 99 99 99 99 +mean 34 35 36 37 +sd 22 11 55 66 +corr 9 8 7 +corr 6 5 +corr 4 +end data. +@end example + + +The @subcmd{SPLIT} is used to indicate that variables are to be +considered as split variables. For example, the following +defines two matrices using the variable @samp{S1} to distinguish +between them. + +@example +matrix data + variables = s1 rowtype_ var01 TO var04 + /split = s1 + /format = full diagonal. + +begin data +0 mean 34 35 36 37 +0 sd 22 11 55 66 +0 n 99 98 99 92 +0 corr 1 9 8 7 +0 corr 9 1 6 5 +0 corr 8 6 1 4 +0 corr 7 5 4 1 +1 mean 44 45 34 39 +1 sd 23 15 51 46 +1 n 98 34 87 23 +1 corr 1 2 3 4 +1 corr 2 1 5 6 +1 corr 3 5 1 7 +1 corr 4 6 7 1 +end data. +@end example + @node PRINT @section PRINT @vindex PRINT @@ -963,7 +1135,7 @@ PRINT [/[@var{line_no}] @var{arg}@dots{}] @var{arg} takes one of the following forms: - '@var{string}' [@var{start}-@var{end}] + '@var{string}' [@var{start}] @var{var_list} @var{start}-@var{end} [@var{type_spec}] @var{var_list} (@var{fortran_spec}) @var{var_list} * @@ -1003,11 +1175,10 @@ line number, the next line number will be specified. Multiple lines may be specified using multiple slashes with the intended output for a line following its respective slash. -Literal strings may be printed. Specify the string itself. Optionally -the string may be followed by a column number or range of column -numbers, specifying the location on the line for the string to be -printed. Otherwise, the string will be printed at the current position -on the line. +Literal strings may be printed. Specify the string itself. +Optionally the string may be followed by a column number, specifying +the column on the line where the string should start. Otherwise, the +string will be printed at the current position on the line. Variables to be printed can be specified in the same ways as available for @cmd{DATA LIST FIXED} (@pxref{DATA LIST FIXED}). In addition, a