X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=doc%2Fdata-io.texi;h=1d4b0d6b0ba3f255d907eb78a2c5ff8fa131c794;hb=302635bb8fa9b61e9646dcd49574a2dedcafd3de;hp=f7d3e7ff336726413ffd6105a4c8c9426655434c;hpb=fc64edfca5e53e7a463dd25ab0c79cf135c33531;p=pspp diff --git a/doc/data-io.texi b/doc/data-io.texi index f7d3e7ff33..1d4b0d6b0b 100644 --- a/doc/data-io.texi +++ b/doc/data-io.texi @@ -48,7 +48,6 @@ actually be read until a procedure is executed. * INPUT PROGRAM:: Support for complex input programs. * LIST:: List cases in the active dataset. * NEW FILE:: Clear the active dataset. -* MATRIX DATA:: Defining matrix material for procedures. * PRINT:: Display values in print formats. * PRINT EJECT:: Eject the current page then print. * PRINT SPACE:: Print blank lines. @@ -968,160 +967,6 @@ NEW FILE. @cmd{NEW FILE} command clears the dictionary and data from the current active dataset. -@node MATRIX DATA -@section MATRIX DATA -@vindex MATRIX DATA - -@display -MATRIX DATA - VARIABLES = @var{columns} - [FILE='@var{file_name}'| INLINE @} - [/FORMAT= [@{LIST | FREE@}] - [@{UPPER | LOWER | FULL@}] - [@{DIAGONAL | NODIAGONAL@}]] - [/N= @var{n}] - [/SPLIT= @var{split_variables}]. -@end display - -The @cmd{MATRIX DATA} command is used to input data in the form of matrices -which can subsequently be used by other commands. If the -@subcmd{FILE} is omitted or takes the value @samp{INLINE} then the command -should immediately followed by @cmd{BEGIN DATA} (@pxref{BEGIN DATA}). - -There is one mandatory subcommand, @i{viz:} @subcmd{VARIABLES}, which defines -the @var{columns} of the matrix. -Normally, the @var{columns} should include an item called @samp{ROWTYPE_}. -The @samp{ROWTYPE_} column is used to specify the purpose of a row in the -matrix. - -@example -matrix data - variables = rowtype_ var01 TO var08. - -begin data. -mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7 -sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5 -n 92 92 92 92 92 92 92 92 -corr 1.00 -corr .18 1.00 -corr -.22 -.17 1.00 -corr .36 .31 -.14 1.00 -corr .27 .16 -.12 .22 1.00 -corr .33 .15 -.17 .24 .21 1.00 -corr .50 .29 -.20 .32 .12 .38 1.00 -corr .17 .29 -.05 .20 .27 .20 .04 1.00 -end data. -@end example - -In the above example, the first three rows have ROWTYPE_ values of -@samp{mean}, @samp{sd}, and @samp{n}. These indicate that the rows -contain mean values, standard deviations and counts, respectively. -All subsequent rows have a ROWTYPE_ of @samp{corr} which indicates -that the values are correlation coefficients. - -Note that in this example, the upper right values of the @samp{corr} -values are blank, and in each case, the rightmost value is unity. -This is because, the -@subcmd{FORMAT} subcommand defaults to @samp{LOWER DIAGONAL}, -which indicates that only the lower triangle is provided in the data. -The opposite triangle is automatically inferred. One could instead -specify the upper triangle as follows: - - -@example -matrix data - variables = rowtype_ var01 TO var08 - /format = upper nodiagonal. - -begin data. -mean 24.3 5.4 69.7 20.1 13.4 2.7 27.9 3.7 -sd 5.7 1.5 23.5 5.8 2.8 4.5 5.4 1.5 -n 92 92 92 92 92 92 92 92 -corr .17 .50 -.33 .27 .36 -.22 .18 -corr .29 .29 -.20 .32 .12 .38 -corr .05 .20 -.15 .16 .21 -corr .20 .32 -.17 .12 -corr .27 .12 -.24 -corr -.20 -.38 -corr .04 -end data. -@end example - -In this example the @samp{NODIAGONAL} keyword is used. Accordingly -the diagonal values of the matrix are omitted. This implies that -there is one less @samp{corr} line than there are variables. -If the @samp{FULL} option is passed to the @subcmd{FORMAT} subcommand, -then all the matrix elements must be provided, including the diagonal -elements. - -In the preceding examples, each matrix row has been specified on a -single line. If you pass the keyword @var{FREE} to @subcmd{FORMAT} -then the data may be data for several matrix rows may be specified on -the same line, or a single row may be split across lines. - -The @subcmd{N} subcommand may be used to specify the number -of valid cases for each variable. It should not be used if the -data contains a record whose ROWTYPE_ column is @samp{N} or @samp{N_VECTOR}. -It implies a @samp{N} record whose values are all @var{n}. -That is to say, -@example -matrix data - variables = rowtype_ var01 TO var04 - /format = upper nodiagonal - /n = 99. -begin data -mean 34 35 36 37 -sd 22 11 55 66 -corr 9 8 7 -corr 6 5 -corr 4 -end data. -@end example -produces an effect identical to -@example -matrix data - variables = rowtype_ var01 TO var04 - /format = upper nodiagonal -begin data -n 99 99 99 99 -mean 34 35 36 37 -sd 22 11 55 66 -corr 9 8 7 -corr 6 5 -corr 4 -end data. -@end example - - -The @subcmd{SPLIT} is used to indicate that variables are to be -considered as split variables. For example, the following -defines two matrices using the variable @samp{S1} to distinguish -between them. - -@example -matrix data - variables = s1 rowtype_ var01 TO var04 - /split = s1 - /format = full diagonal. - -begin data -0 mean 34 35 36 37 -0 sd 22 11 55 66 -0 n 99 98 99 92 -0 corr 1 9 8 7 -0 corr 9 1 6 5 -0 corr 8 6 1 4 -0 corr 7 5 4 1 -1 mean 44 45 34 39 -1 sd 23 15 51 46 -1 n 98 34 87 23 -1 corr 1 2 3 4 -1 corr 2 1 5 6 -1 corr 3 5 1 7 -1 corr 4 6 7 1 -end data. -@end example - @node PRINT @section PRINT @vindex PRINT