X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=debian%2Fchangelog;h=9e8d859fc39fc6f9e6b8c421c3d25cf97a93b7a6;hb=f3608bf129d0e6db76d186ae1ef1d396db959e0d;hp=eb1d40a6fd752e5421361d916d9a9a2e97371422;hpb=a0bc29a541fc7dc6e20137d5558e2094d614e6ab;p=openvswitch diff --git a/debian/changelog b/debian/changelog index eb1d40a6..9e8d859f 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,5 +1,541 @@ -openvswitch (0.90.6) unstable; urgency=low +openvswitch (1.8.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - New FAQ. Please send updates and additions! + - Authors of controllers, please read the new section titled "Action + Reproduction" in DESIGN, which describes an Open vSwitch change in + behavior in corner cases that may affect some controllers. + - ovs-l3ping: + - A new test utility that can create L3 tunnel between two Open + vSwitches and detect connectivity issues. + - ovs-ofctl: + - New --sort and --rsort options for "dump-flows" command. + - "mod-port" command can now control all OpenFlow config flags. + - OpenFlow: + - Allow general bitwise masking for IPv4 and IPv6 addresses in + IPv4, IPv6, and ARP packets. (Previously, only CIDR masks + were allowed.) + - Allow support for arbitrary Ethernet masks. (Previously, only + the multicast bit in the destination address could be individually + masked.) + - New field OXM_OF_METADATA, to align with OpenFlow 1.1. + - The OFPST_QUEUE request now reports an error if a specified port or + queue does not exist, or for requests for a specific queue on all + ports, if the specified queue does not exist on any port. (Previous + versions generally reported an empty set of results.) + - New "flow monitor" feature to allow controllers to be notified of + flow table changes as they happen. + - Additional protocols are not mirrored and dropped when forward-bpdu is + false. For a full list, see the ovs-vswitchd.conf.db man page. + - Open vSwitch now sends RARP packets in situations where it previously + sent a custom protocol, making it consistent with behavior of QEMU and + VMware. + - All Open vSwitch programs and log files now show timestamps in UTC, + instead the local timezone, by default. - * Development version. + -- Open vSwitch team Mon, 16 Jul 2012 16:44:52 +0900 - -- Ben Pfaff Tue, 15 Dec 2009 11:00:11 -0800 +openvswitch (1.7.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - kernel modules are renamed. openvswitch_mod.ko is now + openvswitch.ko and brcompat_mod.ko is now brcompat.ko. + - Increased the number of NXM registers to 8. + - Added ability to configure dscp setting for manager and controller + connections. By default, these connections have a DSCP value of + Internetwork Control (0xc0). + - Added the granular link health statistics, 'cfm_health', to an + interface. + - OpenFlow: + - Added support to mask nd_target for ICMPv6 neighbor discovery flows. + - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC) + multipart messages. + - ovs-ofctl: + - Added the "dump-ports-desc" command to retrieve port + information using the new port description multipart messages. + - ovs-test: + - Added support for spawning ovs-test server from the client. + - Now ovs-test is able to automatically create test bridges and ports. + - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows. + - The "coverage/log" command previously available through ovs-appctl + has been replaced by "coverage/show". The new command replies with + coverage counter values, instead of logging them. + + -- Open vSwitch team Mon, 07 May 2012 14:11:52 +0900 + +openvswitch (1.6.1-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - Allow OFPP_CONTROLLER as the in_port for packet-out messages. + + -- Open vSwitch team Mon, 25 Jun 2012 13:52:17 +0900 + +openvswitch (1.6.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - bonding + - LACP bonds no longer fall back to balance-slb when negotiations fail. + Instead they drop traffic. + - The default bond_mode changed from SLB to active-backup, to protect + unsuspecting users from the significant risks of SLB bonds (which are + documented in vswitchd/INTERNALS). + - Load balancing can be disabled by setting the bond-rebalance-interval + to zero. + - OpenFlow: + - Added support for bitwise matching on TCP and UDP ports. + See ovs-ofctl(8) for more information. + - NXM flow dumps now include times elapsed toward idle and hard + timeouts. + - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows + controllers more precise control over which OpenFlow messages they + receive asynchronously. + - New "fin_timeout" action. + - Added "fin_timeout" support to "learn" action. + - The default MAC learning timeout has been increased from 60 seconds + to 300 seconds. The MAC learning timeout is now configurable. + - When QoS settings for an interface do not configure a default queue + (queue 0), Open vSwitch now uses a default configuration for that + queue, instead of dropping all packets as in previous versions. + - Logging to console and file will have UTC timestamp as a default for all + the daemons. An example of the default format is 2012-01-27T16:35:17Z. + ovs-appctl can be used to change the default format as before. + - New support for limiting the number of flows in an OpenFlow flow + table, with configurable policy for evicting flows upon + overflow. See the Flow_Table table in ovs-vswitch.conf.db(5) + for more information. + - New "enable-async-messages" column in the Controller table. If set to + false, OpenFlow connections to the controller will initially have all + asynchronous messages disabled, overriding normal OpenFlow behavior. + - ofproto-provider interface: + - "struct rule" has a new member "used" that ofproto implementations + should maintain by updating with ofproto_rule_update_used(). + - ovsdb-client: + - The new option --timestamp causes the "monitor" command to print + a timestamp with every update. + - CFM module CCM broadcasts can now be tagged with an 802.1p priority. + + -- Open vSwitch team Fri, 24 Feb 2012 11:12:48 +0900 + +openvswitch (1.5.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - OpenFlow: + - Added support for querying, modifying, and deleting flows + based on flow cookie when using NXM. + - Added new NXM_PACKET_IN format. + - ovs-ofctl: + - Added daemonization support to the monitor and snoop commands. + - ovs-vsctl: + - The "find" command supports new set relational operators + {=}, {!=}, {<}, {>}, {<=}, and {>=}. + - ovsdb-tool now uses the typical database and schema installation + directories as defaults. + + -- Open vSwitch team Fri, 01 June 2012 13:06:00 +0900 + +openvswitch (1.4.0+git20120426-1) unstable; urgency=low + + * New upstream release fixing the following bugs: + o Broken log rotation. + o Use-after-free error when ports disappear. + o Minor memory leaks. + o Testsuite failures on big-endian architectures. + + -- Ben Pfaff Thu, 26 Apr 2012 13:46:55 -0700 + +openvswitch (1.4.0+git20120321-1) unstable; urgency=low + + * New upstream version including: + o Features: + - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0. + - vswitchd: Make the MAC entry aging time configurable. + - mac-learning: Increase MAC learning timeout to 300 seconds. + o Bug fixes: + - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes + queues. + - netlink-socket: Increase Netlink socket receive buffer size. + - ofproto: Fix code that keeps track of MTU. + - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes + - bond: Incorrectly reported an error in appctl. + - socket-util: Unlink Unix domain sockets that bind but fail to connect. + - bridge: Remove unwanted ports at time of ofproto creation. + - dpif-linux: Make dpif_linux_port_query_by_name() query only one + datapath. + - ofproto-dpif: Cleanup STP on ports when disabled on their bridge. + - configure: Try to extract kernel source directory from build Makefile. + - vswitchd: Always configure a default queue for QoS. + - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL. + - sflow_agent: Use snprintf() in place of sprintf(). + o Packaging: + - Move PKI directory to FHS-compliant location. Closes: #661090. + Thanks to Andreas Beckmann for reporting + this bug. + - Use a different way to avoid failing install without kernel module. + - Avoid unit test failure when doing "unofficial" builds. + - Bump standards-version to 3.9.3. + - Remove some useless files from the dkms package. + - Clean .pyc files in "clean" target. + - Remove po-debconf build dependency. + - Build-depend on python-all to pull in all Python versions. + - Add missing ${python:Depends} to openvswitch-test package. + - Improve long descriptions so as to better describe the packages. + - Bump debhelper compat level to 8 and make build-depends consistent. + - Fix exit status of openvswitch-switch init script "status" command. + - Use provided kernel source dir instead of host kernel version. + - Do not run "make" if "configure" fails during DKMS build. + - Look in /lib/modules instead of /usr/src for DKMS kernel sources. + - Fix dependencies for openvswitch-datapath-dkms package. + - Don't install Python modules for obsolete Python versions. + - Add dependency on ${misc:Depends} to openvswitch-test + o Documentation improvements: + - ovsdb-doc: Use minus sign in negative numbers in nroff output. + - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a + hyphen. + - ovsdb-doc: Put NAME section into generated manpage. + - Fix typo in manpage. + - vswitchd: Document behavior of 802.1p priorities with VLAN splinters. + - netdev: Fix typo in error message. + - INSTALL.Linux: minor typo + + * Many thanks to Thomas Goirand for contributing many + of the packaging fixes listed above. + + * This version fixes most of the lintian errors described in bug + #663051, but a few remain, so this upload does not close that bug. I + believe that this upload should be suitable for downgrading that bug's + severity. + + -- Ben Pfaff Wed, 21 Mar 2012 10:00:28 -0700 + +openvswitch (1.4.0-2+nmu1) unstable; urgency=low + + * Non maintainer upload. + * Removes all patches in debian/patches, because they are patching stuff + inconditionally in debian/*, and this should be applied by default. + * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that + the kernel module builds as expected (Closes: #659685). + + -- Thomas Goirand Thu, 08 Mar 2012 08:46:24 +0000 + +openvswitch (1.4.0-2) unstable; urgency=low + + * Use explicit DKMS variable for kernel source directory + - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch + - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch + - 0001-debian-Use-provided-kernel-source-dir.patch + - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch + - (closes: #659685) + * Don't install Python modules for obsolete Python versions + - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch + + -- Simon Horman Tue, 14 Feb 2012 11:43:13 +0900 + +openvswitch (1.4.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - Compatible with Open vSwitch kernel module included in Linux 3.3. + - New "VLAN splinters" feature to work around buggy device drivers + in old Linux versions. (This feature is deprecated. When + broken device drivers are no longer in widespread use, we will + delete this feature.) See ovs-vswitchd.conf.db(5) for more + information. + - OpenFlow: + - Added ability to match on IPv6 flow label through NXM. + - Added ability to match on ECN bits in IPv4 and IPv6 through NXM. + - Added ability to match on TTL in IPv4 and IPv6 through NXM. + - Added ability to modify ECN bits in IPv4. + - Added ability to modify TTL in IPv4. + - ovs-vswitchd: + - Don't require the "normal" action to use mirrors. Traffic will + now be properly mirrored for any flows, regardless of their + actions. + - Track packet and byte statistics sent on mirrors. + - ovs-appctl: + - New "fdb/flush" command to flush bridge's MAC learning table. + - ovs-test: + - A new distributed testing tool that allows one to diagnose performance + and connectivity issues. This tool currently is not included in RH or + Xen packages. + - RHEL packaging now supports integration with Red Hat network scripts. + - Debian: Depend on python (>= 2.7) | python-argparse instead of + python-argparse to avoid pulling in python2.6 + (closes: #653645) + + -- Open vSwitch team Mon, 30 Jan 2012 23:36:00 +0000 + +openvswitch (1.3.0-1) unstable; urgency=low + [ Open vSwitch team ] + * New upstream version + - OpenFlow: + - Added an OpenFlow extension which allows the "output" action to accept + NXM fields. + - Added an OpenFlow extension for flexible learning. + - Bumped number of NXM registers from four to five. + - ovs-appctl: + - New "version" command to determine version of running daemon. + - If no argument is provided for "cfm/show", displays detailed + information about all interfaces with CFM enabled. + - If no argument is provided for "lacp/show", displays detailed + information about all ports with LACP enabled. + - ovs-vswitchd: + - The software switch now supports 255 OpenFlow tables, instead + of just one. By default, only table 0 is consulted, but the + new NXAST_RESUBMIT_TABLE action can look up in additional + tables. Tables 128 and above are reserved for use by the + switch itself; please use only tables 0 through 127. + - Add support for 802.1D spanning tree (STP). + - Fragment handling extensions: + - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4 + fields are made available for matching in fragments with + offset 0. + - New NXM_NX_IP_FRAG match field for matching IP fragments (usable + via "ip_frag" in ovs-ofctl). + - New ovs-ofctl "get-frags" and "set-frags" commands to get and set + fragment handling policy. + - CAPWAP tunneling now supports an extension to transport a 64-key. By + default it remains compatible with the old version and other + standards-based implementations. + - Flow setups are now processed in a round-robin manner across ports + to prevent any single client from monopolizing the CPU and conducting + a denial of service attack. + - Added support for native VLAN tagging. A new "vlan_mode" + parameter can be set for "port". Possible values: "access", + "trunk", "native-tagged" and "native-untagged". + - test-openflowd has been removed. Please use ovs-vswitchd instead. + + -- Open vSwitch team Mon, 09 Dec 2011 23:36:00 +0000 + +openvswitch (1.2.0-1) unstable; urgency=low + + [ Open vSwitch team ] + * New upstream version + - New "ofproto" abstraction layer to ease porting to hardware + switching ASICs. + - Packaging for Red Hat Enterprise Linux 5.6 and 6.0. + - Datapath support for Linux kernels up to 3.0. + - OpenFlow: + - New "bundle" and "bundle_load" action extensions. + - Database: + - Implement table unique constraints. + - Support cooperative locking between callers. + - ovs-dpctl: + - New "-s" option for "show" command prints packet and byte + counters for each port. + - ovs-ofctl: + - New "--readd" option for "replace-flows". + - ovs-vsctl: + - New "show" command to print an overview of configuration. + - New "comment" command to add remark that explains intentions. + - ovs-brcompatd has been rewritten to fix long-standing bugs. + - ovs-openflowd has been renamed test-openflowd and moved into the + tests directory. Its presence confused too many users. Please + use ovs-vswitchd instead. + - New ovs-benchmark utility to test flow setup performance. + - A new log level "off" has been added. Configuring a log facility + "off" prevents any messages from being logged to it. Previously, + "emer" was effectively "off" because no messages were ever logged at + level "emer". Now, errors that cause a process to exit are logged + at "emer" level. + - "configure" option --with-l26 has been renamed --with-linux, and + --with-l26-source has been renamed --with-linux-source. The old + names will be removed after the next release, so please update + your scripts. + - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and + datapath/linux-2.6/compat-2.6 directories. + - Feature removals: + - Dropped support for "tun_id_from_cookie" OpenFlow extension. + Please use the extensible match extensions instead. + - Removed the Maintenance_Point and Monitor tables in an effort + to simplify 802.1ag configuration. + - Performance and scalability improvements + - Bug fixes + + -- Open vSwitch team Wed, 03 Aug 2011 14:43:00 +0000 + +openvswitch (1.1.1-1) unstable; urgency=low + + [ Open vSwitch team ] + * Bug fixes. + + [ Simon Horman ] + * docs: Suppress warning marcro DD not defined + (upstream commit 58f870d0) + * debian: Make openvswitch depend on Python + (upstream commit aa41cb61) + * debian: Don't begin openvswitch-pki description with article. + (upstream commit bc6bb66) + * Debian: Add ${misc:Depends} dependency to python-openvswitch + * Debian: Update standards version from 3.9.1 to 3.9.2 + * Debian: ${source:Version} dependency on python openvswitch + * Debian: ${source:Version} dependency for python openvswitch + * Switch to dpkg-source 3.0 (quilt) format + - For local non-debian/ patches (above) + + -- Simon Horman Wed, 15 Jun 2011 10:46:15 +0900 + +openvswitch (1.1.0-1) unstable; urgency=low + + [ Open vSwitch team ] + * New upstream version + - Ability to define policies over IPv6 + - LACP + - 802.1ag CCM + - Support for extensible match extensions to OpenFlow + - QoS: + - Support for HFSC qdisc. + - Queue used by in-band control can now be configured. + - Kernel: + - Kernel<->userspace interface has been reworked and should be + close to a stable ABI now. + - "Port group" concept has been dropped. + - GRE over IPSEC tunnels + - Bonding: + - New active backup bonding mode. + - New L4 hashing support when LACP is enabled. + - Source MAC hash now includes VLAN field also. + - miimon support. + - Greatly improved handling of large flow tables + - ovs-dpctl: + - "show" command now prints full vport configuration. + - "dump-groups" command removed since kernel support for + port groups was dropped. + - ovs-vsctl: + - New commands for working with the new Managers table. + - "list" command enhanced with new formatting options and --columns + option. + - "get" command now accepts new --id option. + - New "find" command. + - ovs-ofctl: + - New "queue-stats" command for printing queue stats. + - New commands "replace-flows" and "diff-flows". + - Commands to add and remove flows can now read from files. + - New --flow-format option to enable or disable NXM. + - New --more option to increase OpenFlow message verbosity. + - Removed "tun-cookie" command, which is no longer useful. + - ovs-controller enhancements for testing various features. + - New ovs-vlan-test command for testing for Linux kernel driver VLAN + bugs. New ovs-vlan-bug-workaround command for enabling and + disabling a workaround for these driver bugs. + - OpenFlow support: + - "Resubmit" actions now update flow statistics. + - New "register" extension for use in matching and actions, via NXM. + - New "multipath" experimental action extension. + - New support for matching multicast Ethernet frames, via NXM. + - New extension for OpenFlow vendor error codes. + - New extension to set the QoS output queue without actually + sending to an output port. + - Open vSwitch now reports a single flow table, instead of + separate hash and wildcard tables. This better models the + current implementation. + - New experimental "note" action. + - New "ofproto/trace" ovs-appctl command and associated utilities + to ease debugging complex flow tables. + - Database: + - Schema documentation now includes an entity-relationship diagram. + - The database is now garbage collected. In most tables, + unreferenced rows will be deleted automatically. + - Many tables now include statistics updated periodically by + ovs-vswitchd or ovsdb-server. + - Every table now has an "external-ids" column for use by OVS + integrators. + - There is no default controller anymore. Each bridge must have its + controller individually specified. + - The "fail-mode" is now a property of a Bridge instead of a Controller. + - New versioning and checksum features. + - New Managers table and manager_options column in Open_vSwitch table + for specifying managers. The old "managers" column in the + Open_vSwitch table has been removed. + - Many "name" columns are now immutable. + - Feature removals: + - Dropped support for XenServer pre-5.6.100. + - Dropped support for Linux pre-2.6.18. + - Dropped controller discovery support. + - Dropped "ovs-ofctl status" and the OpenFlow extension that it used. + Statistics reporting in the database is a rough equivalent. + - Dropped the "corekeeper" package (now separate, at + http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper). + - Performance and scalability improvements + - Bug fixes + + [ Simon Horman ] + * Add the following fixes from upstream branch-1.1 + - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in + dpif_linux_is_internal_device(). + - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel + module. + - 002d4a3 vswitch: Improve schema documentation. + - 58bd294 cfm: Fix broken fault logic. + - c042664 bridge: Run once before configuring CFM. + * Switch to dpkg-source 3.0 (quilt) format + + -- Simon Horman Wed, 27 Apr 2011 17:11:10 +0900 + +openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low + + * Git snapshot, including + - tests: Fix Y2011 bug in testsuite + (closes: #609506) + + -- Simon Horman Wed, 12 Jan 2011 08:34:35 +0900 + +openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low + + * Git snaptshot + + -- Simon Horman Thu, 06 Jan 2011 11:11:55 +0900 + +openvswitch (1.1.0~pre2-5) unstable; urgency=low + + * Open vSwitch only works on Linux so set + the Architecture of binary packages to linux-any accordingly + + -- Simon Horman Tue, 23 Nov 2010 07:55:19 +0900 + +openvswitch (1.1.0~pre2-4) unstable; urgency=low + + * Add procps to Build-Depends + (closes: #602891) + + -- Simon Horman Tue, 16 Nov 2010 06:46:17 +0900 + +openvswitch (1.1.0~pre2-3) unstable; urgency=low + + * Remove the corekeeper package as it isn't strongly related + to Open vSwitch. It has subsequently been broken off into + a separate source repository and may be uploaded as its + own debian source package. + http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary + (closes: #602946) + * Avoid the use of long socket names. + (closes: #602891, closes: #602911) + + -- Simon Horman Thu, 11 Nov 2010 06:35:05 +0900 + +openvswitch (1.1.0~pre2-2) unstable; urgency=low + + * Clarify licensing of files in xenserver/ + + -- Simon Horman Thu, 23 Sep 2010 10:56:18 +0900 + +openvswitch (1.1.0~pre2-1) unstable; urgency=low + + * New upstream version + - Bug fixes + + -- Simon Horman Wed, 15 Sep 2010 18:28:59 +0900 + +openvswitch (1.1.0~pre1-1) unstable; urgency=low + + * New upstream version + - OpenFlow 1.0 slicing (QoS) functionality + - Python bindings for configuration database (no write support) + - Performance and scalability improvements + - Bug fixes + + -- Open vSwitch team Tue, 31 Aug 2010 23:20:00 +0000 + +openvswitch (1.0.1-1) unstable; urgency=low + + * New upstream version. + + -- Open vSwitch team Mon, 17 May 2010 10:36:00 +0000