X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=TODO;h=108c77781edbc23b732af89b6b5d1e71fe5e616d;hb=f7bc12fb5e4c3eb3ebb633f99b8b266622fc57f7;hp=d831a4747e98306f65119378e964fccbc89799bb;hpb=a1f21ee888bd397c0d256ebd1db4caaf107f40ab;p=pintos-anon diff --git a/TODO b/TODO index d831a47..108c777 100644 --- a/TODO +++ b/TODO @@ -1,24 +1,269 @@ -*- text -*- -* The p1-4.c testcase needs significant tuning. Currently it takes - too long (especially when SHOW_PROGRESS is turned on) and doesn't - show significant improvement. +From: "Waqar Mohsin" +Subject: 3 questions about switch_threads() in switch.S +To: blp@cs.stanford.edu, joshwise@stanford.edu +Date: Fri, 3 Mar 2006 17:09:21 -0800 -* The semantics of the join system call should change so that it only - returns the exit code once. +QUESTION 1 + +In the section + + # Save current stack pointer to old thread's stack, if any. + movl SWITCH_CUR(%esp), %eax + test %eax, %eax + jz 1f + movl %esp, (%eax,%edx,1) +1: -* mmap/munmap should use segment IDs like Nachos. Too hard otherwise. + # Restore stack pointer from new thread's stack. + movl SWITCH_NEXT(%esp), %ecx + movl (%ecx,%edx,1), %esp -* Finish writing the tour. +why are we saving the current stack pointer only if the "cur" thread pointer +is non-NULL ? Isn't it gauranteed to be non-NULL because switch_threads() is +only called form schedule(), where we have -* Come up with a way for us to release some of the tests. + struct thread *cur = running_thread (); -* userprog project should mark read-only pages as actually read-only - in the page table +which should always be non-NULL (given the way kernel pool is laid out). -* Add src/testcases/vm, src/testcases/filesys and make it clear to use - them? +QUESTION 2 -* Speed up disk routines: filling an 8 MB disk takes a long time. - (They're only slow because timer_sleep always waits for at least one - timer tick.) + # This stack frame must match the one set up by thread_create(). + pushl %ebx + pushl %ebp + pushl %esi + pushl %edi + +I find the comment confusing. thread_create() is a special case: the set of +registers popped from switch_threads stack frame for a newly created thread +are all zero, so their order shouldn't dictate the order above. + +I think all that matters is that the order of pops at the end of +switch_threads() is the opposite of the pushes at the beginning (as shown +above). + +QUESTION 3 + +Is it true that struct switch_threads_frame does NOT strictly require + + struct thread *cur; /* 20: switch_threads()'s CUR argument. */ + struct thread *next; /* 24: switch_threads()'s NEXT argument. */ +at the end ? + +When a newly created thread's stack pointer is installed in switch_threads(), +all we do is pop the saved registers and return to switch_entry() which pops +off and discards the above two simulated (and not used) arguments to +switch_threads(). + +If we remove these two from struct switch_threads_frame and don't do a + + # Discard switch_threads() arguments. + addl $8, %esp +in switch_entry(), things should still work. Am I right ? + +Thanks +Waqar + +From: "Godmar Back" +Subject: thread_yield in irq handler +To: "Ben Pfaff" +Date: Wed, 22 Feb 2006 22:18:50 -0500 + +Ben, + +you write in your Tour of Pintos: + +"Second, an interrupt handler must not call any function that can +sleep, which rules out thread_yield(), lock_acquire(), and many +others. This is because external interrupts use space on the stack of +the kernel thread that was running at the time the interrupt occurred. +If the interrupt handler tried to sleep and that thread resumed, then +the two uses of the single stack would interfere, which cannot be +allowed." + +Is the last sentence really true? + +I thought the reason that you couldn't sleep is that you would put +effectively a random thread/process to sleep, but I don't think it +would cause problems with the kernel stack. After all, it doesn't +cause this problem if you call thread_yield at the end of +intr_handler(), so why would it cause this problem earlier. + +As for thread_yield(), my understanding is that the reason it's called +at the end is to ensure it's done after the interrupt is acknowledged, +which you can't do until the end because Pintos doesn't handle nested +interrupts. + + - Godmar + +From: "Godmar Back" + +For reasons I don't currently understand, some of our students seem +hesitant to include each thread in a second "all-threads" list and are +looking for ways to implement the advanced scheduler without one. + +Currently, I believe, all tests for the mlfqs are such that all +threads are either ready or sleeping in timer_sleep(). This allows for +an incorrect implementation in which recent-cpu and priorities are +updated only for those threads that are on the alarm list or the ready +list. + +The todo item would be a test where a thread is blocked on a +semaphore, lock or condition variable and have its recent_cpu decay to +zero, and check that it's scheduled right after the unlock/up/signal. + +From: "Godmar Back" +Subject: set_priority & donation - a TODO item +To: "Ben Pfaff" +Date: Mon, 20 Feb 2006 22:20:26 -0500 + +Ben, + +it seems that there are currently no tests that check the proper +behavior of thread_set_priority() when called by a thread that is +running under priority donation. The proper behavior, I assume, is to +temporarily drop the donation if the set priority is higher, and to +reassume the donation should the thread subsequently set its own +priority again to a level that's lower than a still active donation. + + - Godmar + +From: Godmar Back +Subject: project 4 question/comment regarding caching inode data +To: Ben Pfaff +Date: Sat, 14 Jan 2006 15:59:33 -0500 + +Ben, + +in section 6.3.3 in the P4 FAQ, you write: + +"You can store a pointer to inode data in struct inode, if you want," + +Should you point out that if they indeed do that, they likely wouldn't +be able to support more than 64 open inodes systemwide at any given +point in time. + +(This seems like a rather strong limitation; do your current tests +open more than 64 files? +It would also point to an obvious way to make the projects harder by +specifically disallowing that inode data be locked in memory during +the entire time an inode is kept open.) + + - Godmar + +From: Godmar Back +Subject: on caching in project 4 +To: Ben Pfaff +Date: Mon, 9 Jan 2006 20:58:01 -0500 + +here's an idea for future semesters. + +I'm in the middle of project 4, I've started by implementing a buffer +cache and plugging it into the existing filesystem. Along the way I +was wondering how we could test the cache. + +Maybe one could adopt a similar testing strategy as in project 1 for +the MLQFS scheduler: add a function that reads "get_cache_accesses()" +and a function "get_cache_hits()". Then create a version of pintos +that creates access traces for a to-be-determined workload. Run an +off-line analysis that would determine how many hits a perfect cache +would have (MAX), and how much say an LRU strategy would give (MIN). +Then add a fudge factor to account for different index strategies and +test that the reported number of cache hits/accesses is within (MIN, +MAX) +/- fudge factor. + +(As an aside - I am curious why you chose to use a clock-style +algorithm rather than the more straightforward LRU for your buffer +cache implementation in your sample solution. Is there a reason for +that? I was curious to see if it made a difference, so I implemented +LRU for your cache implementation and ran the test workload of project +4 and printed cache hits/accesses. +I found that for that workload, the clock-based algorithm performs +almost identical to LRU (within about 1%, but I ran nondeterministally +with QEMU). I then reduced the cache size to 32 blocks and found again +the same performance, which raises the suspicion that the test +workload might not force any cache replacement, so the eviction +strategy doesn't matter.) + +Godmar Back writes: + +> in your sample solution to P4, dir_reopen does not take any locks when +> changing a directory's open_cnt. This looks like a race condition to +> me, considering that dir_reopen is called from execute_process without +> any filesystem locks held. + +* Get rid of rox--causes more trouble than it's worth + +* Reconsider command line arg style--confuses everyone. + +* Finish writing tour. + +* Introduce a "yield" system call to speed up the syn-* tests. + +via Godmar Back: + +* Project 3 solution needs FS lock. + +* Get rid of mmap syscall, add sbrk. + +* Make backtrace program accept multiple object file arguments, + e.g. add -u option to allow backtracing user program also. + +* page-linear, page-shuffle VM tests do not use enough memory to force + eviction. Should increase memory consumption. + +* Add FS persistence test(s). + +* lock_acquire(), lock_release() don't need additional intr_dis/enable + calls, because the semaphore protects lock->holder. + + + +* process_death test needs improvement + +* Internal tests. + +* Improve automatic interpretation of exception messages. + +* Userprog project: + + - Mark read-only pages as actually read-only in the page table. Or, + since this was consistently rated as the easiest project by the + students, require them to do it. + + - Don't provide per-process pagedir implementation but only + single-process implementation and require students to implement + the separation? This project was rated as the easiest after all. + Alternately we could just remove the synchronization on pid + selection and check that students fix it. + +* Filesys project: + + - Need a better way to measure performance improvement of buffer + cache. Some students reported that their system was slower with + cache--likely, Bochs doesn't simulate a disk with a realistic + speed. + +* Documentation: + + - Add "Digging Deeper" sections that describe the nitty-gritty x86 + details for the benefit of those interested. + + - Add explanations of what "real" OSes do to give students some + perspective. + +* Assignments: + + - Add extra credit: + + . Low-level x86 stuff, like paged page tables. + + . Specifics on how to implement sbrk, malloc. + + . Other good ideas. + + . opendir/readdir/closedir + + . everything needed for getcwd()