X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=vswitchd%2Fvswitch.xml;h=0ec1fd3c95fe55ae9cddd4427de7774b1259fe5e;hb=d4f15cb982ff772110509c4292697bbe8a68d0f4;hp=6031b5a0efcafe7c7938afd15abf0f24bb0804b0;hpb=206018136a10d00b275d85386c5744a555584151;p=openvswitch
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 6031b5a0..0ec1fd3c 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -577,8 +577,8 @@
Configures LACP on this port. LACP allows directly connected
- switchs to negotiate which links may be bonded. LACP may be enabled
- on non-bonded ports for the benefit of any switchs they may be
+ switches to negotiate which links may be bonded. LACP may be enabled
+ on non-bonded ports for the benefit of any switches they may be
connected to. The LACP timing which should be used on this
+ . Possible values are Users may manually set a heartbeat transmission rate to increase
+ the fault detection speed further. When manually set, OVS
+ expects the partner switch to be configured with the same
+ transmission rate. Manually setting active
ports are allowed to initiate LACP
negotiations. passive
ports are allowed to participate
in LACP negotiations initiated by a remote switch, but not allowed to
@@ -647,23 +647,42 @@
miimon
to detect failures. bond-hash-basis
lacp-system-id
lacp-system-priority
lacp-time
fast
and
- slow
. By default slow
is used. When
- configured to be fast
more frequent LACP heartbeats
- will be requested causing connectivity problems to be detected more
- quickly.fast
,
+ slow
and a positive number of milliseconds. By
+ default slow
is used. When configured to be
+ fast
LACP heartbeats are requested at a rate of once
+ per second causing connectivity problems to be detected more
+ quickly. In slow
mode, heartbeats are requested at
+ a rate of once every 30 seconds.lacp-time
to
+ something other than fast
or slow
is
+ not supported by the LACP specification.lacp-strict
true
, configures this to
require successful LACP negotiations to enable any slaves.
Defaults to false
which safely allows LACP to be used
- with switchs that do not support the protocol.
null