X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=sidebyside;f=include%2Fopenflow%2Fopenflow-1.1.h;h=d02ece39a7530976dc28b5021401d4696914ed1a;hb=12bb621f563c2644ce20922e641848c35ede98c0;hp=02120a5186eb7c7d9e19ce3f498f31a429a02323;hpb=5293a2e145a9ccc7e42c4a3cf49dee2a21a3b1c8;p=openvswitch

diff --git a/include/openflow/openflow-1.1.h b/include/openflow/openflow-1.1.h
index 02120a51..d02ece39 100644
--- a/include/openflow/openflow-1.1.h
+++ b/include/openflow/openflow-1.1.h
@@ -93,4 +93,112 @@ enum ofp11_type {
     OFPT11_QUEUE_GET_CONFIG_REPLY,    /* Controller/switch message */
 };
 
+/* OpenFlow 1.1 port config flags are just the common flags. */
+#define OFPPC11_ALL \
+    (OFPPC_PORT_DOWN | OFPPC_NO_RECV | OFPPC_NO_FWD | OFPPC_NO_PACKET_IN)
+
+/* OpenFlow 1.1 specific current state of the physical port.  These are not
+ * configurable from the controller.
+ */
+enum ofp11_port_state {
+    OFPPS11_BLOCKED      = 1 << 1,  /* Port is blocked */
+    OFPPS11_LIVE         = 1 << 2,  /* Live for Fast Failover Group. */
+#define OFPPS11_ALL (OFPPS_LINK_DOWN | OFPPS11_BLOCKED | OFPPS11_LIVE)
+};
+
+/* OpenFlow 1.1 specific features of ports available in a datapath. */
+enum ofp11_port_features {
+    OFPPF11_40GB_FD    = 1 << 7,  /* 40 Gb full-duplex rate support. */
+    OFPPF11_100GB_FD   = 1 << 8,  /* 100 Gb full-duplex rate support. */
+    OFPPF11_1TB_FD     = 1 << 9,  /* 1 Tb full-duplex rate support. */
+    OFPPF11_OTHER      = 1 << 10, /* Other rate, not in the list. */
+
+    OFPPF11_COPPER     = 1 << 11, /* Copper medium. */
+    OFPPF11_FIBER      = 1 << 12, /* Fiber medium. */
+    OFPPF11_AUTONEG    = 1 << 13, /* Auto-negotiation. */
+    OFPPF11_PAUSE      = 1 << 14, /* Pause. */
+    OFPPF11_PAUSE_ASYM = 1 << 15  /* Asymmetric pause. */
+#define OFPPF11_ALL ((1 << 16) - 1)
+};
+
+/* Description of a port */
+struct ofp11_port {
+    ovs_be32 port_no;
+    uint8_t pad[4];
+    uint8_t hw_addr[OFP_ETH_ALEN];
+    uint8_t pad2[2];                  /* Align to 64 bits. */
+    char name[OFP_MAX_PORT_NAME_LEN]; /* Null-terminated */
+
+    ovs_be32 config;        /* Bitmap of OFPPC_* flags. */
+    ovs_be32 state;         /* Bitmap of OFPPS_* and OFPPS11_* flags. */
+
+    /* Bitmaps of OFPPF_* and OFPPF11_* that describe features.  All bits
+     * zeroed if unsupported or unavailable. */
+    ovs_be32 curr;          /* Current features. */
+    ovs_be32 advertised;    /* Features being advertised by the port. */
+    ovs_be32 supported;     /* Features supported by the port. */
+    ovs_be32 peer;          /* Features advertised by peer. */
+
+    ovs_be32 curr_speed;    /* Current port bitrate in kbps. */
+    ovs_be32 max_speed;     /* Max port bitrate in kbps */
+};
+
+/* Modify behavior of the physical port */
+struct ofp11_port_mod {
+    struct ofp_header header;
+    ovs_be32 port_no;
+    uint8_t pad[4];
+    uint8_t hw_addr[OFP_ETH_ALEN]; /* The hardware address is not
+                                      configurable.  This is used to
+                                      sanity-check the request, so it must
+                                      be the same as returned in an
+                                      ofp11_port struct. */
+    uint8_t pad2[2];        /* Pad to 64 bits. */
+    ovs_be32 config;        /* Bitmap of OFPPC_* flags. */
+    ovs_be32 mask;          /* Bitmap of OFPPC_* flags to be changed. */
+
+    ovs_be32 advertise;     /* Bitmap of OFPPF_* and OFPPF11_*.  Zero all bits
+                               to prevent any action taking place. */
+    uint8_t pad3[4];        /* Pad to 64 bits. */
+};
+OFP_ASSERT(sizeof(struct ofp11_port_mod) == 40);
+
+/* OpenFlow 1.1 specific capabilities supported by the datapath (struct
+ * ofp_switch_features, member capabilities). */
+enum ofp11_capabilities {
+    OFPC11_GROUP_STATS    = 1 << 3,  /* Group statistics. */
+};
+
+enum ofp11_action_type {
+    OFPAT11_OUTPUT,           /* Output to switch port. */
+    OFPAT11_SET_VLAN_VID,     /* Set the 802.1q VLAN id. */
+    OFPAT11_SET_VLAN_PCP,     /* Set the 802.1q priority. */
+    OFPAT11_SET_DL_SRC,       /* Ethernet source address. */
+    OFPAT11_SET_DL_DST,       /* Ethernet destination address. */
+    OFPAT11_SET_NW_SRC,       /* IP source address. */
+    OFPAT11_SET_NW_DST,       /* IP destination address. */
+    OFPAT11_SET_NW_TOS,       /* IP ToS (DSCP field, 6 bits). */
+    OFPAT11_SET_NW_ECN,       /* IP ECN (2 bits). */
+    OFPAT11_SET_TP_SRC,       /* TCP/UDP/SCTP source port. */
+    OFPAT11_SET_TP_DST,       /* TCP/UDP/SCTP destination port. */
+    OFPAT11_COPY_TTL_OUT,     /* Copy TTL "outwards" -- from next-to-outermost
+                                 to outermost */
+    OFPAT11_COPY_TTL_IN,      /* Copy TTL "inwards" -- from outermost to
+                               next-to-outermost */
+    OFPAT11_SET_MPLS_LABEL,   /* MPLS label */
+    OFPAT11_SET_MPLS_TC,      /* MPLS TC */
+    OFPAT11_SET_MPLS_TTL,     /* MPLS TTL */
+    OFPAT11_DEC_MPLS_TTL,     /* Decrement MPLS TTL */
+
+    OFPAT11_PUSH_VLAN,        /* Push a new VLAN tag */
+    OFPAT11_POP_VLAN,         /* Pop the outer VLAN tag */
+    OFPAT11_PUSH_MPLS,        /* Push a new MPLS tag */
+    OFPAT11_POP_MPLS,         /* Pop the outer MPLS tag */
+    OFPAT11_SET_QUEUE,        /* Set queue id when outputting to a port */
+    OFPAT11_GROUP,            /* Apply group. */
+    OFPAT11_SET_NW_TTL,       /* IP TTL. */
+    OFPAT11_DEC_NW_TTL,       /* Decrement IP TTL. */
+    OFPAT11_EXPERIMENTER = 0xffff
+};
+
 #endif /* openflow/openflow-1.1.h */