X-Git-Url: https://pintos-os.org/cgi-bin/gitweb.cgi?a=blobdiff_plain;ds=inline;f=vswitchd%2Fvswitch.xml;h=4288ee6b37f50715b1449a4d1526165534f975cf;hb=6c222e55fa4222c6724094e1e7a0a69addf6b030;hp=f9a82ccf0241aa19f2f4e83fc9cbb6ffd7ff34a7;hpb=84c5d450aaefb73b944506afe9f2fe05fa0612bf;p=openvswitch
diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index f9a82ccf..4288ee6b 100644
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -536,8 +536,8 @@
Attempts to always assign a given flow to the same slave
consistently. In an effort to maintain stability, no load
balancing is done. Uses a similar hashing strategy to
- balance-tcp
, falling back to balance-slb
- style hashing when LACP negotiations are unsuccessful.
+ balance-tcp
, always taking into account L3 and L4
+ fields even if LACP negotiations are unsuccessful.
Slave selection decisions are made based on
bond-stable-id
if set. Otherwise, OpenFlow port
number is used. Decisions are consistent across all ovs-vswitchd
@@ -1266,12 +1266,41 @@
-
+
+
+ 802.1ag Connectivity Fault Management (CFM) allows a group of
+ Maintenance Points (MPs) called a Maintenance Association (MA) to
+ detect connectivity problems with each other. MPs within a MA should
+ have complete and exclusive interconnectivity. This is verified by
+ occasionally broadcasting Continuity Check Messages (CCMs) at a
+ configurable transmission interval.
+
+
+
+ A Maintenance Point ID (MPID) uniquely identifies each endpoint within
+ a Maintenance Association. The MPID is used to identify this endpoint
+ to other Maintenance Points in the MA. Each end of a link being
+ monitored should have a different MPID. Must be configured to enable
+ CFM on this .
+
-
- Connectivity monitor configuration for this interface.
+
+ The MPID of the remote endpoint being monitored. If this
+ does not have connectivity to an endpoint
+ advertising the configured MPID, a fault is signalled. Must be
+ configured to enable CFM on this
+
+ Indicates a connectivity fault triggered by an inability to receive
+ heartbeats from the remote endpoint. When a fault is triggered on
+ s participating in bonds, they will be
+ disabled.
+
+
+
+
+
Boolean value indicating LACP status for this interface. If true, this
interface has current LACP information about its LACP partner. This
@@ -1322,6 +1351,10 @@
Key-value pairs for rarely used interface features.
+ cfm_interval
+ - The transmission interval of CFM heartbeats in milliseconds.
+ Three missed heartbeat receptions indicate a connectivity fault.
+ Defaults to 1000ms.
bond-stable-id
- A positive integer using in
stable
bond mode to
make slave selection decisions. Allocating
@@ -1534,69 +1567,6 @@
-
-
- A attaches to an to
- implement 802.1ag Connectivity Fault Management (CFM). CFM allows a
- group of Maintenance Points (MPs) called a Maintenance Association (MA)
- to detect connectivity problems with each other. MPs within a MA should
- have complete and exclusive interconnectivity. This is verified by
- occasionally broadcasting Continuity Check Messages (CCMs) at a
- configurable transmission interval. A is
- responsible for collecting data about other MPs in its MA and
- broadcasting CCMs.
-
-
-
-
- A Maintenance Point ID (MPID) uniquely identifies each endpoint within
- a Maintenance Association. The MPID is used to identify this
- to other endpoints in the MA.
-
-
-
- A set of which this
- should have connectivity to. If this
- does not have connectivity to any MPs in this
- set, or has connectivity to any MPs not in this set, a fault is
- signaled.
-
-
-
- The transmission interval of CCMs in milliseconds. Three missed CCMs
- indicate a connectivity fault. Defaults to 1000ms.
-
-
-
-
-
- Indicates a Connectivity Fault caused by a configuration error, a down
- remote MP, or unexpected connectivity to a remote MAID or remote MP.
-
-
-
-
-
-
- A represents a MP which a
- has or should have connectivity to.
-
-
-
-
- A Maintenance Point ID (MPID) uniquely identifies each endpoint within
- a Maintenance Association. All MPs within a MA should have a unique
- MPID.
-
-
-
-
-
- Indicates a connectivity fault.
-
-
-
-
A port mirror within a .
A port mirror configures a bridge to send selected frames to special