<dt><code>datapath-id</code></dt>
<dd>Exactly 16 hex
digits to set the OpenFlow datapath ID to a specific
- value.</dd>
+ value. May not be all-zero.</dd>
+ <dt><code>disable-in-band</code></dt>
+ <dd>If set to <code>true</code>, disable in-band control on
+ the bridge regardless of controller and manager settings.</dd>
<dt><code>hwaddr</code></dt>
<dd>An Ethernet address in the form
<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>
<p>Open vSwitch populates this column when the port number becomes
known. If the interface is successfully added,
<ref column="ofport"/> will be set to a number between 1 and 65535
- (generally either in the range 1 to 65280, exclusive, or 65534, the
+ (generally either in the range 1 to 65279, inclusive, or 65534, the
port number for the OpenFlow ``local port''). If the interface
cannot be added then Open vSwitch sets this column
to -1.</p>