<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>:<var>xx</var>
to set the hardware address of the local port and influence the
datapath ID.</dd>
+ <dt><code>in-band-queue</code></dt>
+ <dd>
+ A queue ID as a nonnegative integer. This sets the OpenFlow queue
+ ID that will be used by flows set up by in-band control on this
+ bridge. If unset, or if the port used by an in-band control flow
+ does not have QoS configured, or if the port does not have a queue
+ with the specified ID, the default queue is used instead.
+ </dd>
</dl>
</column>
</group>
for information on how this classifier works and how to configure it.
</dd>
</dl>
+ <dl>
+ <dt><code>linux-hfsc</code></dt>
+ <dd>
+ Linux "Hierarchical Fair Service Curve" classifier.
+ See <code>http://linux-ip.net/articles/hfsc.en/</code> for
+ information on how this classifier works.
+ </dd>
+ </dl>
</column>
<column name="queues">
<column name="other_config">
<p>Key-value pairs for configuring QoS features that depend on
<ref column="type"/>.</p>
- <p>The <code>linux-htb</code> class supports the following key-value
- pairs:</p>
+ <p>The <code>linux-htb</code> and <code>linux-hfsc</code> classes support
+ the following key-value pairs:</p>
<dl>
<dt><code>max-rate</code></dt>
<dd>Maximum rate shared by all queued traffic, in bit/s.
a queue with a larger value receives any. Specific priority
values are unimportant; only relative ordering matters.</dd>
</dl>
+ <p>The key-value pairs defined for <ref table="QoS"/> <ref table="QoS"
+ column="type"/> of <code>linux-hfsc</code> are:</p>
+ <dl>
+ <dt><code>min-rate</code></dt>
+ <dd>Minimum guaranteed bandwidth, in bit/s. Required.</dd>
+ <dt><code>max-rate</code></dt>
+ <dd>Maximum allowed bandwidth, in bit/s. Optional. If specified, the
+ queue's rate will not be allowed to exceed the specified value, even
+ if excess bandwidth is available. If unspecified, defaults to no
+ limit.</dd>
+ </dl>
</column>
<column name="external_ids">