ofproto: fix typo in documentation.

[openvswitch] / vswitchd / vswitch.xml

diff --git a/vswitchd/vswitch.xml b/vswitchd/vswitch.xml
index 32d4c595b20c1a412358df72685005d5392aea8d..688f7157221619b8cfbbba2c781e17d4ccbe03d6 100644 (file)
--- a/vswitchd/vswitch.xml
+++ b/vswitchd/vswitch.xml
@@ -1769,11 +1769,6 @@
         frame having an invalid interval.
       </column>
 
-      <column name="cfm_fault_status" key="sequence">
-        Indicates a CFM fault was triggered because the CFM module received
-        a CCM frame with a sequence number that it was not expecting.
-      </column>
-
       <column name="cfm_health">
         <p>
           Indicates the health of the interface as a percentage of CCM frames
@@ -2756,10 +2751,9 @@
         Service (QoS) on IP networks.
 
         The DSCP value specified here is used when establishing the connection
-        between the controller and the Open vSwitch.  The connection must be
-        reset for the new DSCP values to take effect.  If no value is
-        specified, a default value of 48 is chosen.  Valid DSCP values must be
-        in the range 0 to 63.
+        between the controller and the Open vSwitch.  If no value is specified,
+        a default value of 48 is chosen.  Valid DSCP values must be in the
+        range 0 to 63.
       </column>
     </group>
 
@@ -3003,10 +2997,9 @@
         Service (QoS) on IP networks.
 
         The DSCP value specified here is used when establishing the connection
-        between the manager and the Open vSwitch.  The connection must be
-        reset for the new DSCP values to take effect.  If no value is
-        specified, a default value of 48 is chosen.  Valid DSCP values must be
-        in the range 0 to 63.
+        between the manager and the Open vSwitch.  If no value is specified, a
+        default value of 48 is chosen.  Valid DSCP values must be in the range
+        0 to 63.
       </column>
     </group>