</p>
<column name="ovs_version">
- The Open vSwitch version number, e.g. <code>1.1.0pre2</code>.
+ The Open vSwitch version number, e.g. <code>1.1.0</code>.
If Open vSwitch was configured with a build number, then it is
- also included, e.g. <code>1.1.0pre2+build4948</code>.
+ also included, e.g. <code>1.1.0+build6579</code>.
</column>
<column name="db_version">
</dl>
<p>
- The following mode requires the upstream switch to support 802.3ad with
+ The following modes require the upstream switch to support 802.3ad with
successful LACP negotiation. If LACP negotiation fails then
- <code>balance-slb</code> mode is used as a fallback:
+ <code>balance-slb</code> style flow hashing is used as a fallback:
</p>
<dl>
</dd>
</dl>
+ <dl>
+ <dt><code>stable</code></dt>
+ <dd>
+ <p>Attempts to always assign a given flow to the same slave
+ consistently. In an effort to maintain stability, no load
+ balancing is done. Uses a similar hashing strategy to
+ <code>balance-tcp</code>, falling back to <code>balance-slb</code>
+ style hashing when LACP negotiations are unsuccessful.</p>
+ <p>Slave selection decisions are made based on LACP port ID when LACP
+ negotiations are successful, falling back to openflow port number
+ when unsuccessful. Thus, decisions are consistent across all
+ ovs-vswitchd instances with equivalent port IDs.</p>
+ </dd>
+ </dl>
+
<p>These columns apply only to bonded ports. Their values are
otherwise ignored.</p>
Connectivity monitor configuration for this interface.
</column>
+ <column name="lacp_current">
+ Boolean value indicating LACP status for this interface. If true, this
+ interface has current LACP information about its LACP partner. This
+ information may be used to monitor the health of interfaces in a LACP
+ enabled port. This column will be empty if LACP is not enabled.
+ </column>
+
<column name="external_ids">
Key-value pairs for use by external frameworks that integrate
with Open vSwitch, rather than by Open vSwitch itself. System
number of seconds, it will send a probe. If a response is not
received for the same additional amount of time, Open vSwitch
assumes the connection has been broken and attempts to reconnect.
- Default is implementation-specific.
+ Default is implementation-specific. A value of 0 disables
+ inactivity probes.
</column>
</group>
will send a probe. If a response is not received for the same
additional amount of time, Open vSwitch assumes the connection has been
broken and attempts to reconnect. Default is implementation-specific.
+ A value of 0 disables inactivity probes.
</column>
</group>