<column name="lacp">
<p>Configures LACP on this port. LACP allows directly connected
- switchs to negotiate which links may be bonded. LACP may be enabled
- on non-bonded ports for the benefit of any switchs they may be
+ switches to negotiate which links may be bonded. LACP may be enabled
+ on non-bonded ports for the benefit of any switches they may be
connected to. <code>active</code> ports are allowed to initiate LACP
negotiations. <code>passive</code> ports are allowed to participate
in LACP negotiations initiated by a remote switch, but not allowed to
<dd> The number of milliseconds between successive attempts to
poll each interface's MII. Only relevant on ports which use
<code>miimon</code> to detect failures. </dd>
+ <dt><code>bond-hash-basis</code></dt>
+ <dd> An integer hashed along with flows when choosing output slaves.
+ When changed, all flows will be assigned different hash values
+ possibly causing slave selection decisions to change.</dd>
<dt><code>lacp-system-id</code></dt>
<dd> The LACP system ID of this <ref table="Port"/>. The system ID
of a LACP bond is used to identify itself to its partners. Must
<dd> When <code>true</code>, configures this <ref table="Port"/> to
require successful LACP negotiations to enable any slaves.
Defaults to <code>false</code> which safely allows LACP to be used
- with switchs that do not support the protocol.</dd>
+ with switches that do not support the protocol.</dd>
</dl>
</column>
</group>