locally, or it can be configured to connect a given bridge to one or
more external OpenFlow controllers, such as NOX.
.
-For each of these commands, a \fIbridge\fR of \fBdefault\fR applies
-the configuration as the default for any bridge that has not been
-explicitly configured. Otherwise, \fIbridge\fR must name a bridge,
-and the settings apply only to that bridge. (Omitting \fIbridge\fR
-entirely usually has the same effect as specifying \fBdefault\fR.)
-.
-.IP "\fBget\-controller\fR [\fIbridge\fR]"
+.IP "\fBget\-controller\fR \fIbridge\fR"
Prints the configured controller target.
.
-.IP "\fBdel\-controller\fR [\fIbridge\fR]"
+.IP "\fBdel\-controller\fR \fIbridge\fR"
Deletes the configured controller target.
.
-.IP "\fBset\-controller\fR [\fIbridge\fR] \fItarget\fR\&..."
-Sets the configured controller target or targets. If more than one
-\fItarget\fR is specified, then \fIbridge\fR may not be omitted. Each
-\fItarget\fR may use any of the following forms:
+.IP "\fBset\-controller\fR \fIbridge\fR \fItarget\fR\&..."
+Sets the configured controller target or targets. Each \fItarget\fR may
+use any of the following forms:
.
.RS
.so lib/vconn-active.man
If this option is set to \fBsecure\fR, \fBovs\-vswitchd\fR will not
set up flows on its own when the controller connection fails.
.
-.IP "\fBget\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBget\-fail\-mode\fR \fIbridge\fR"
Prints the configured failure mode.
.
-.IP "\fBdel\-fail\-mode\fR [\fIbridge\fR]"
+.IP "\fBdel\-fail\-mode\fR \fIbridge\fR"
Deletes the configured failure mode.
.
-.IP "\fBset\-fail\-mode\fR [\fIbridge\fR] \fBstandalone\fR|\fBsecure\fR"
+.IP "\fBset\-fail\-mode\fR \fIbridge\fR \fBstandalone\fR|\fBsecure\fR"
Sets the configured failure mode.
.
.SS "SSL Configuration"
identified by mirror name.
.IP "\fBController\fR"
Configuration for an OpenFlow controller. A controller attached to a
-particular bridge may be identified by the bridge's name. The default
-controller controller for an Open vSwitch may be identified by
-specifying \fB.\fR as the record name.
+particular bridge may be identified by the bridge's name.
.IP "\fBNetFlow\fR"
A NetFlow configuration attached to a bridge. Records may be
identified by bridge name.