Prevents \fBovs\-vsctl\fR from waiting for \fBovs\-vswitchd\fR to
reconfigure itself according to the the modified database. This
option should be used if \fBovs\-vswitchd\fR is not running;
-otherwise, \fBovs-vsctl\fR will not exit until \fBovs-vswitchd\fR
+otherwise, \fBovs\-vsctl\fR will not exit until \fBovs\-vswitchd\fR
starts.
.IP
This option has no effect if the commands specified do not change the
.IP "\fB\-\-dry\-run\fR"
Prevents \fBovs\-vsctl\fR from actually modifying the database.
.
-.IP "\fB-t \fIsecs\fR"
-.IQ "\fB--timeout=\fIsecs\fR"
+.IP "\fB\-t \fIsecs\fR"
+.IQ "\fB\-\-timeout=\fIsecs\fR"
Limits runtime to approximately \fIsecs\fR seconds. A value of
zero will cause \fBovs\-vsctl\fR to wait forever. If the timeout expires,
\fBovs\-vsctl\fR will exit with a \fBSIGALRM\fR signal. If this option is
controllers, OVSDB servers, and SSL, and deletes port mirroring,
NetFlow, and sFlow configuration. This command also removes all
\fBother\-config\fR keys from all database records, except that
-\fBother-config:hwaddr\fR is preserved if it is present in a Bridge
+\fBother\-config:hwaddr\fR is preserved if it is present in a Bridge
record. Other networking configuration is left as-is.
.
.SS "Bridge Commands"
When \fBovs\-vswitchd\fR is configured to connect over SSL for management or
controller connectivity, the following parameters are required:
.TP
-\fBprivate-key\fR
+\fBprivate\-key\fR
Specifies a PEM file containing the private key used as the virtual
switch's identity for SSL connections to the controller.
.TP
certifies the virtual switch's private key, identifying a trustworthy
switch.
.TP
-\fBca-cert\fR
+\fBca\-cert\fR
Specifies a PEM file containing the CA certificate used to verify that
the virtual switch is connected to a trustworthy controller.
.PP
as part of the SSL certificate chain. The SSL protocol does not
require the controller to send the CA certificate, but
\fBcontroller\fR(8) can be configured to do so with the
-\fB--peer-ca-cert\fR option.
+\fB\-\-peer\-ca\-cert\fR option.
.
.SS "Database Commands"
.
An sFlow configuration attached to a bridge. Records may be
identified by bridge name.
.PP
-Names of tables, records, and columns are not case-sensitive, and
-\fB--\fR and \fB_\fR are treated interchangeably. Unique
+Record names must be specified in full and with correct
+capitalization. Names of tables and columns are not case-sensitive,
+and \fB\-\-\fR and \fB_\fR are treated interchangeably. Unique
abbreviations are acceptable, e.g. \fBnet\fR or \fBn\fR is sufficient
to identify the \fBNetFlow\fR table.
.
or empty map, as appropriate. This command applies only to columns
that are allowed to be empty.
.
-.IP "[\fB--id=@\fIname\fR] \fBcreate\fR \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
+.IP "[\fB\-\-id=@\fIname\fR] \fBcreate\fR \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
Creates a new record in \fItable\fR and sets the initial values of
each \fIcolumn\fR. Columns not explicitly set will receive their
default values. Outputs the UUID of the new row.
will abort if no bridge named \fBbr0\fR exists when \fBovs\-vsctl\fR
initially connects to the database.
.IP
-Unlike all the other database commands, \fBwait\-until\fR treats its
-\fIrecord\fR argument as case-sensitive and does not allow it to be
-abbreviated. Otherwise, \fBwait\-until br1\fR would be satisfied by a
-bridge named \fBbr10\fR.
-.IP
Consider specifying \fB\-\-timeout=0\fR along with
\fB\-\-wait\-until\fR, to prevent \fBovs\-vsctl\fR from terminating
after waiting only at most 5 seconds.
.SH "EXAMPLES"
Create a new bridge named br0 and add port eth0 to it:
.IP
-.B "ovs-vsctl add\-br br0"
+.B "ovs\-vsctl add\-br br0"
.br
-.B "ovs-vsctl add\-port br0 eth0"
+.B "ovs\-vsctl add\-port br0 eth0"
.PP
Alternatively, perform both operations in a single atomic transaction:
.IP
-.B "ovs-vsctl add\-br br0 \-\- add\-port br0 eth0"
+.B "ovs\-vsctl add\-br br0 \-\- add\-port br0 eth0"
.PP
Delete bridge \fBbr0\fR, reporting an error if it does not exist:
.IP
point to a new \fBQoS\fR record, which in turn points with its queue 0
to a new \fBQueue\fR record:
.IP
-.B "ovs-vsctl \-\- set port eth0 qos=@newqos \-\- \-\-id=@newqos create qos type=linux\-htb other\-config:max\-rate=1000000 queues:0=@newqueue \-\- \-\-id=@newqueue create queue other\-config:min\-rate=1000000 other\-config:max\-rate=1000000"
+.B "ovs\-vsctl \-\- set port eth0 qos=@newqos \-\- \-\-id=@newqos create qos type=linux\-htb other\-config:max\-rate=1000000 queues:0=@newqueue \-\- \-\-id=@newqueue create queue other\-config:min\-rate=1000000 other\-config:max\-rate=1000000"
.
.SH "EXIT STATUS"
.IP "0"