.
.SH DESCRIPTION
The \fBovs\-vsctl\fR program configures \fBovs\-vswitchd\fR(8) by
-providing a high\-level interface to its configuration
-database. This program is mainly intended for use when
-\fBovs\-vswitchd\fR is running. If it is used when
-\fBovs\-vswitchd\fR is not running, then \fB\-\-no\-wait\fR should be
-specified and configuration changes will only take effect when
-\fBovs\-vswitchd\fR is started.
-.PP
-By default, each time \fBovs\-vsctl\fR runs, it connects to an
-\fBovsdb\-server\fR process that maintains an Open vSwitch
-configuration database. Using this connection, it queries and
-possibly applies changes to the database, depending on the supplied
-commands. Then, if it applied any changes, it waits until
-\fBovs\-vswitchd\fR has finished reconfiguring itself before it exits.
+providing a high\-level interface to its configuration database.
+See \fBovs\-vswitchd.conf.db\fR(5) for comprehensive documentation of
+the database schema.
+.PP
+\fBovs\-vsctl\fR connects to an \fBovsdb\-server\fR process that
+maintains an Open vSwitch configuration database. Using this
+connection, it queries and possibly applies changes to the database,
+depending on the supplied commands. Then, if it applied any changes,
+by default it waits until \fBovs\-vswitchd\fR has finished
+reconfiguring itself before it exits. (If you use \fBovs\-vsctl\fR
+when \fBovs\-vswitchd\fR is not running, use \fB\-\-no\-wait\fR.)
.PP
\fBovs\-vsctl\fR can perform any number of commands in a single run,
implemented as a single atomic transaction against the database.
much like a bridge separate from its ``parent bridge,'' but the actual
implementation in Open vSwitch uses only a single bridge, with ports on
the fake bridge assigned the implicit VLAN of the fake bridge of which
-they are members.
+they are members. (A fake bridge for VLAN 0 receives packets that
+have no 802.1Q tag or a tag with VLAN 0.)
.
.SH OPTIONS
.
Creates a ``fake bridge'' named \fIbridge\fR within the existing Open
vSwitch bridge \fIparent\fR, which must already exist and must not
itself be a fake bridge. The new fake bridge will be on 802.1Q VLAN
-\fIvlan\fR, which must be an integer between 1 and 4095. Initially
+\fIvlan\fR, which must be an integer between 0 and 4095. Initially
\fIbridge\fR will have no ports (other than \fIbridge\fR itself).
.IP
Without \fB\-\-may\-exist\fR, attempting to create a bridge that
.IP "\fBInterface\fR"
A network device attached to a port. Records may be identified by
name.
+.IP "\fBFlow_Table\fR"
+Configuration for a particular OpenFlow flow table. Records may be
+identified by name.
.IP "\fBQoS\fR"
Quality-of-service configuration for a \fBPort\fR. Records may be
identified by port name.
respectively. When multiple pairs are present (separated by spaces or
a comma), duplicate keys are not allowed, and again the order is not
important. Duplicate values are allowed. An empty map is represented
-as \fB{}\fR, and curly braces may be optionally enclose non-empty maps
-as well.
+as \fB{}\fR. Curly braces may optionally enclose non-empty maps as
+well (but use quotes to prevent the shell from expanding
+\fBother-config={0=x,1=y}\fR into \fBother-config=0=x
+other-config=1=y\fR, which may not have the desired effect).
.
.ST "Database Command Syntax"
.IP "[\fB\-\-columns=\fIcolumn\fR[\fB,\fIcolumn\fR]...] \fBlist \fItable \fR[\fIrecord\fR]..."
.IP "[\fB\-\-columns=\fIcolumn\fR[\fB,\fIcolumn\fR]...] \fBfind \fItable \fR[\fIcolumn\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR]..."
Lists the data in each record in \fItable\fR whose \fIcolumn\fR equals
\fIvalue\fR or, if \fIkey\fR is specified, whose \fIcolumn\fR contains
-a \fIkey\fR with the specified \fIvalue\fR. Any of the operators
-\fB!=\fR, \fB<\fR, \fB>\fR, \fB<=\fR, or \fB>=\fR may be substituted
-for \fB=\fR to test for inequality, less than, greater than, less than
-or equal to, or greater than or equal to, respectively. (Don't forget
-to escape \fB<\fR or \fB>\fR from interpretation by the shell.)
+a \fIkey\fR with the specified \fIvalue\fR. The following operators
+may be used where \fB=\fR is written in the syntax summary:
+.RS
+.IP "\fB= != < > <= >=\fR"
+Selects records in which \fIcolumn\fR[\fB:\fIkey\fR] equals, does not
+equal, is less than, is greater than, is less than or equal to, or is
+greater than or equal to \fIvalue\fR, respectively.
+.IP
+Consider \fIcolumn\fR[\fB:\fIkey\fR] and \fIvalue\fR as sets of
+elements. Identical sets are considered equal. Otherwise, if the
+sets have different numbers of elements, then the set with more
+elements is considered to be larger. Otherwise, consider a element
+from each set pairwise, in increasing order within each set. The
+first pair that differs determines the result. (For a column that
+contains key-value pairs, first all the keys are compared, and values
+are considered only if the two sets contain identical keys.)
+.IP "\fB{=} {!=}\fR"
+Test for set equality or inequality, respectively.
+.IP "\fB{<=}\fR"
+Selects records in which \fIcolumn\fR[\fB:\fIkey\fR] is a subset of
+\fIvalue\fR. For example, \fBflood-vlans{<=}1,2\fR selects records in
+which the \fBflood-vlans\fR column is the empty set or contains 1 or 2
+or both.
+.IP "\fB{<}\fR"
+Selects records in which \fIcolumn\fR[\fB:\fIkey\fR] is a proper
+subset of \fIvalue\fR. For example, \fBflood-vlans{<}1,2\fR selects
+records in which the \fBflood-vlans\fR column is the empty set or
+contains 1 or 2 but not both.
+.IP "\fB{>=} {>}\fR"
+Same as \fB{<=}\fR and \fB{<}\fR, respectively, except that the
+relationship is reversed. For example, \fBflood-vlans{>=}1,2\fR
+selects records in which the \fBflood-vlans\fR column contains both 1
+and 2.
+.RE
+.IP
+For arithmetic operators (\fB= != < > <= >=\fR), when \fIkey\fR is
+specified but a particular record's \fIcolumn\fR does not contain
+\fIkey\fR, the record is always omitted from the results. Thus, the
+condition \fBother-config:mtu!=1500\fR matches records that have a
+\fBmtu\fR key whose value is not 1500, but not those that lack an
+\fBmtu\fR key.
+.IP
+For the set operators, when \fIkey\fR is specified but a particular
+record's \fIcolumn\fR does not contain \fIkey\fR, the comparison is
+done against an empty set. Thus, the condition
+\fBother-config:mtu{!=}1500\fR matches records that have a \fBmtu\fR
+key whose value is not 1500 and those that lack an \fBmtu\fR key.
+.IP
+Don't forget to escape \fB<\fR or \fB>\fR from interpretation by the
+shell.
.IP
If \fB\-\-columns\fR is specified, only the requested columns are
listed, in the specified order. Otherwise all columns are listed, in
.IP "\fR[\fB\-\-if\-exists\fR] \fBdestroy \fItable record\fR..."
Deletes each specified \fIrecord\fR from \fItable\fR. Unless
\fB\-\-if\-exists\fR is specified, each \fIrecord\fRs must exist.
+.IP "\fB\-\-all destroy \fItable\fR"
+Deletes all records from the \fItable\fR.
.IP
The \fBdestroy\fR command is only useful for records in the \fBQoS\fR
or \fBQueue\fR tables. Records in other tables are automatically
.IP
.B "ifconfig vlan10 192.168.0.123"
.
+.PP
+Add a GRE tunnel port \fBgre0\fR to remote IP address 1.2.3.4 to
+bridge \fBbr0\fR:
+.IP
+.B "ovs\-vsctl add\-port br0 gre0 \-\- set Interface gre0 type=gre options:remote_ip=1.2.3.4"
+.
.SS "Port Mirroring"
.PP
Mirror all packets received or sent on \fBeth0\fR or \fBeth1\fR onto
Remove the mirror created above from \fBbr0\fR, which also destroys
the Mirror record (since it is now unreferenced):
.IP
-.B "remove Bridge br0 mirrors mymirror"
+.B "ovs\-vsctl \-\- \-\-id=@rec get Mirror mymirror \(rs"
+.IP
+.B "\-\- remove Bridge br0 mirrors @rec"
+.PP
+The following simpler command also works:
+.IP
+.B "ovs\-vsctl clear Bridge br0 mirrors"
.SS "Quality of Service (QoS)"
.PP
Create a \fBlinux\-htb\fR QoS record that points to a few queues and
(This command will leave two unreferenced Queue records in the
database. To delete them, use "\fBovs\-vsctl list Queue\fR" to find
their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
-\fIuuid2\fR" to destroy each of them.)
+\fIuuid2\fR" to destroy each of them or use
+"\fBovs\-vsctl -- --all destroy Queue\fR" to delete all records.)
.SS "Connectivity Monitoring"
.PP
Monitor connectivity to a remote maintenance point on eth0.
(since it is now unreferenced):
.IP
.B "ovs\-vsctl \-\- clear Bridge br0 sflow"
+.SS "802.1D Spanning Tree Protocol (STP)"
+.PP
+Configure bridge \fBbr0\fR to participate in an 802.1D spanning tree:
+.IP
+.B "ovs\-vsctl set Bridge br0 stp_enable=true"
+.PP
+Set the bridge priority of \fBbr0\fR to 0x7800:
+.IP
+.B "ovs\-vsctl set Bridge br0 other_config:stp-priority=0x7800"
+.PP
+Set the path cost of port \fBeth0\fR to 10:
+.IP
+.B "ovs\-vsctl set Port eth0 other_config:stp-path-cost=10"
+.PP
+Deconfigure STP from above:
+.IP
+.B "ovs\-vsctl clear Bridge br0 stp_enable"
+.PP
.SH "EXIT STATUS"
.IP "0"
Successful program execution.
.SH "SEE ALSO"
.
.BR ovsdb\-server (1),
-.BR ovs\-vswitchd (8).
+.BR ovs\-vswitchd (8),
+.BR ovs\-vswitchd.conf.db (5).