.
.RS
.IP \fBoutput\fR:\fIport\fR
-Outputs the packet on the port specified by \fIport\fR.
+.IQ \fBoutput\fR:\fIsrc\fB[\fIstart\fB..\fIend\fB]
+Outputs the packet. If \fIport\fR is an OpenFlow port number, outputs directly
+to it. Otherwise, outputs to the OpenFlow port number read from \fIsrc\fR
+which must be an NXM field as described above. Outputting to an NXM field is
+an OpenFlow extension which is not supported by standard OpenFlow switches.
+.IP
+Example: \fBoutput:NXM_NX_REG0[16..31]\fR outputs to the OpenFlow port number
+written in the upper half of register 0.
.
.IP \fBenqueue\fR:\fIport\fB:\fIqueue\fR
Enqueues the packet on the specified \fIqueue\fR within port
.RS
.
.IP \fBresubmit\fB:\fIport\fR
-Re-searches the OpenFlow flow table with the \fBin_port\fR field
-replaced by \fIport\fR and executes the actions found, if any, in
-addition to any other actions in this flow entry. Recursive
-\fBresubmit\fR actions are ignored.
+.IQ \fBresubmit\fB(\fR[\fIport\fR]\fB,\fR[\fItable\fR]\fB)
+Re-searches this OpenFlow flow table (or the table whose number is
+specified by \fItable\fR) with the \fBin_port\fR field replaced by
+\fIport\fR (if \fIport\fR is specified) and executes the actions
+found, if any, in addition to any other actions in this flow entry.
+.IP
+Recursive \fBresubmit\fR actions are obeyed up to an
+implementation-defined maximum depth. Open vSwitch 1.0.1 and earlier
+did not support recursion; Open vSwitch before 1.2.90 did not support
+\fItable\fR.
.
.IP \fBset_tunnel\fB:\fIid\fR
.IQ \fBset_tunnel64\fB:\fIid\fR
Refer to \fBnicira\-ext.h\fR for more details.
.RE
.
-.IP
-(The OpenFlow protocol supports other actions that \fBovs\-ofctl\fR does
-not yet expose to the user.)
-.
.PP
The \fBadd\-flow\fR, \fBadd\-flows\fR, and \fBmod\-flows\fR commands
support an additional optional field: