information on its flow tables and ports.
.
.TP
-\fBstatus \fIswitch\fR [\fIkey\fR]
-Prints to the console a series of key-value pairs that report the
-status of \fIswitch\fR. If \fIkey\fR is specified, only the key-value
-pairs whose key names begin with \fIkey\fR are printed. If \fIkey\fR is
-omitted, all key-value pairs are printed.
-.
-.TP
\fBdump\-tables \fIswitch\fR
Prints to the console statistics for each of the flow tables used by
\fIswitch\fR.
.
.TP
\fBadd\-flows \fIswitch file\fR
-Add flow entries as described in \fIfile\fR to \fIswitch\fR's
+Add the flow entries listed in \fIfile\fR, or supplied on \fBstdin\fR
+if \fIfile\fR is \fB\-\fR, to \fIswitch\fR's
tables. Each line in \fIfile\fR is a flow entry in the format
described in \fBFlow Syntax\fR, below.
.
restricting a match to an IPv6 address prefix. A netmask is specified
as a CIDR block (e.g. \fB2001:db8:3c4d:1::/64\fR).
.
+.IP \fBnd_target=\fIipv6\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify
+IPv6 Neighbor Discovery (ICMPv6 type 135 or 136), matches the target address
+\fIipv6\fR. \fIipv6\fR is in the same format described earlier for the
+\fBipv6_src\fR and \fBipv6_dst\fR fields.
+.
+.IP \fBnd_sll=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify IPv6
+Neighbor Solicitation (ICMPv6 type 135), matches the source link\-layer
+address option. An address is specified as 6 pairs of hexadecimal
+digits delimited by colons.
+.
+.IP \fBnd_tll=\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fB:\fIxx\fR
+When \fBdl_type\fR, \fBnw_proto\fR, and \fBicmp_type\fR specify IPv6
+Neighbor Advertisement (ICMPv6 type 136), matches the target link\-layer
+address option. An address is specified as 6 pairs of hexadecimal
+digits delimited by colons.
+.
.IP \fBtun_id=\fItunnel-id\fR[\fB/\fImask\fR]
Matches tunnel identifier \fItunnel-id\fR. Only packets that arrive
over a tunnel that carries a key (e.g. GRE with the RFC 2890 key