ovs-vsctl: Add "destroy" command.

[openvswitch] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index fab61e4fbe88e2409c1fd6d81441295d9f4a93a3..cf4ead96da605849d43aeb7fd1d796d1a1b2a328 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -26,25 +26,12 @@ connecting to an OpenFlow switch.  The following connection methods
 are supported:
 
 .RS
-.TP
-\fBssl:\fIhost\fR[\fB:\fIport\fR]
-The specified SSL \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.  The \fB--private-key\fR, \fB--certificate\fR, and
-\fB--ca-cert\fR options are mandatory when this form is used.
-
-.TP
-\fBtcp:\fIhost\fR[\fB:\fIport\fR]
-The specified TCP \fIport\fR (default: 6633) on the given remote
-\fIhost\fR.
-
-.TP
-\fBunix:\fIfile\fR
-The Unix domain server socket named \fIfile\fR.  
-
+.so lib/vconn-active.man
+.
 .IP "\fIfile\fR"
 This is short for \fBunix:\fIfile\fR, as long as \fIfile\fR does not
 contain a colon.
-
+.
 .IP \fIdp\fR
 This is short for \fBunix:@RUNDIR@/\fIdp\fB.mgmt\fR, as long as
 \fIdp\fR does not contain a colon.
@@ -153,7 +140,7 @@ option.
 If \fImiss-len\fR is provided, \fBovs\-ofctl\fR sends an OpenFlow ``set
 configuration'' message at connection setup time that requests
 \fImiss-len\fR bytes of each packet that misses the flow table.  The
-OpenFlow reference implementation not send these messages to the
+OpenFlow reference implementation does not send these messages to the
 \fBovs\-ofctl monitor\fR client connection unless a nonzero value is
 specified on this argument.
 
@@ -165,15 +152,6 @@ flow expirations.
 This command may be useful for debugging switch or controller
 implementations.
 
-.TP
-\fBexecute \fIswitch command \fR[\fIarg\fR...]
-Sends a request to \fIswitch\fR to execute \fIcommand\fR along with
-each \fIarg\fR, if any, then waits for the command to complete and
-reports its completion status on \fBstderr\fR and its output, if any,
-on \fBstdout\fR.  The set of available commands and their argument is
-switch-dependent.  (This command uses a Nicira extension to OpenFlow
-that may not be available on all switches.)
-
 .SS "OpenFlow Switch and Controller Commands"
 
 The following commands, like those in the previous section, may be
@@ -353,6 +331,18 @@ Sets the source Ethernet address to \fImac\fR.
 
 .IP \fBmod_dl_dst\fB:\fImac\fR
 Sets the destination Ethernet address to \fImac\fR.
+
+.IP \fBmod_nw_src\fB:\fIip\fR
+Sets the IPv4 source address to \fIip\fR.
+
+.IP \fBmod_nw_dst\fB:\fIip\fR
+Sets the IPv4 destination address to \fIip\fR.
+
+.IP \fBmod_tp_src\fB:\fIport\fR
+Sets the TCP or UDP source port to \fIport\fR.
+
+.IP \fBmod_tp_dst\fB:\fIport\fR
+Sets the TCP or UDP destination port to \fIport\fR.
 .RE
 
 .IP
@@ -440,28 +430,7 @@ described in \fBFlow Syntax\fR, above.
 \fB--strict\fR
 Uses strict matching when running flow modification commands.
 
-.TP
-\fB-t\fR, \fB--timeout=\fIsecs\fR
-Limits \fBovs\-ofctl\fR runtime to approximately \fIsecs\fR seconds.  If
-the timeout expires, \fBovs\-ofctl\fR will exit with a \fBSIGALRM\fR
-signal.
-
-.TP
-\fB-p\fR, \fB--private-key=\fIprivkey.pem\fR
-Specifies a PEM file containing the private key used as the
-identity for SSL connections to a switch.
-
-.TP
-\fB-c\fR, \fB--certificate=\fIcert.pem\fR
-Specifies a PEM file containing a certificate, signed by the
-controller's certificate authority (CA), that certifies the
-private key to identify a trustworthy controller.
-
-.TP
-\fB-C\fR, \fB--ca-cert=\fIcacert.pem\fR
-Specifies a PEM file containing the CA certificate used to verify that
-a switch is trustworthy.
-
+.so lib/ssl.man
 .so lib/vlog.man
 .so lib/common.man