ofp-parse: Generalize parse_ofp_add_flow_str() as parse_ofp_flow_mod_str().

[openvswitch] / utilities / ovs-ofctl.8.in

diff --git a/utilities/ovs-ofctl.8.in b/utilities/ovs-ofctl.8.in
index bbe747b213a0824f1edf82789852613c80a13836..42c8ab5b3e31ba062efd3052a455d880b1416ba5 100644 (file)
--- a/utilities/ovs-ofctl.8.in
+++ b/utilities/ovs-ofctl.8.in
@@ -115,6 +115,15 @@ the statistics are aggregated across all flows in the switch's flow
 tables.  See \fBFlow Syntax\fR, below, for the syntax of \fIflows\fR.
 The output format is descrbed in \fBTable Entry Output\fR.
 .
+.IP "\fBqueue\-stats \fIswitch \fR[\fIport \fR[\fIqueue\fR]]"
+Prints to the console statistics for the specified \fIqueue\fR on
+\fIport\fR within \fIswitch\fR.  Either of \fIport\fR or \fIqueue\fR
+or both may be omitted (or equivalently specified as \fBALL\fR).  If
+both are omitted, statistics are printed for all queues on all ports.
+If only \fIqueue\fR is omitted, then statistics are printed for all
+queues on \fIport\fR; if only \fIport\fR is omitted, then statistics
+are printed for \fIqueue\fR on every port where it exists.
+.
 .TP
 \fBadd\-flow \fIswitch flow\fR
 Add the flow entry as described by \fIflow\fR to the \fIswitch\fR's 
@@ -460,6 +469,16 @@ Ethernet header.
 This is useful because OpenFlow does not provide a way to match on the
 Ethernet addresses inside ARP packets, so there is no other way to
 drop spoofed ARPs other than sending every ARP packet to a controller.
+.
+.IP \fBset_queue\fB:\fIqueue\fR
+Sets the queue that should be used to \fIqueue\fR when packets are
+output.  The number of supported queues depends on the switch; some
+OpenFlow implementations do not support queuing at all.
+.
+.IP \fBpop_queue\fR
+Restores the queue to the value it was before any \fBset_queue\fR
+actions were applied.
+.
 .RE
 .
 .IP
@@ -477,8 +496,11 @@ A cookie is an opaque identifier that can be associated with the flow.
 flows.
 .
 .PP
-The \fBadd\-flow\fR, \fBadd\-flows\fR, and \fBdel\-flows\fR commands
-support an additional optional field:
+The following additional field sets the priority for flows added by
+the \fBadd\-flow\fR and \fBadd\-flows\fR commands.  For
+\fBmod\-flows\fR and \fBdel\-flows\fR when \fB\-\-strict\fR is
+specified, priority must match along with the rest of the flow
+specification.  Other commands ignore the priority value.
 .
 .IP \fBpriority=\fIvalue\fR
 The priority at which a wildcarded entry will match in comparison to