Prints the name of each configured datapath on a separate line.
.
.TP
-\fBshow \fR[\fIdp\fR...]
+[\fB\-s\fR | \fB\-\-statistics\fR] \fBshow \fR[\fIdp\fR...]
Prints a summary of configured datapaths, including their datapath
numbers and a list of ports connected to each datapath. (The local
-port is identified as port 0.)
+port is identified as port 0.) If \fB\-s\fR or \fB\-\-statistics\fR
+is specified, then packet and byte counters are also printed for each
+port.
.IP
If one or more datapaths are specified, information on only those
datapaths are displayed. Otherwise, \fBovs\-dpctl\fR displays information
up may be confused about their disappearance.
.
.SH OPTIONS
+.IP "\fB\-s\fR, \fB\-\-statistics\fR"
+Causes the \fBshow\fR command to print packet and byte counters for
+each port within the datapaths that it shows.
.TP
\fB\-t\fR, \fB\-\-timeout=\fIsecs\fR
Limits \fBovs\-dpctl\fR runtime to approximately \fIsecs\fR seconds. If
.so lib/vlog.man
.so lib/common.man
.
-.SH EXAMPLES
-.
-A typical \fBovs\-dpctl\fR command sequence for controlling an
-Open vSwitch kernel module:
-.
-.TP
-\fBovs\-dpctl add\-dp dp0\fR
-Creates datapath number 0.
-.
-.TP
-\fBovs\-dpctl add\-if dp0 eth0 eth1\fR
-Adds two network devices to the new datapath.
-.
-.PP
-At this point one would ordinarily start \fBovs\-openflowd\fR(8) on
-\fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch. Then, when
-the switch and the datapath is no longer needed:
-.
-.TP
-\fBovs\-dpctl del\-if dp0 eth0 eth1\fR
-Removes network devices from the datapath.
-.
-.TP
-\fBovs\-dpctl del\-dp dp0\fR
-Deletes the datapath.
-.
.SH "SEE ALSO"
.
.BR ovs\-appctl (8),
-.BR ovs\-openflowd (8),
.BR ovs\-vswitchd (8)