+.de IQ
+. br
+. ns
+. IP "\\$1"
+..
.TH ovs\-dpctl 8 "August 2009" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-dpctl
.
.SH DESCRIPTION
.PP
The \fBovs\-dpctl\fR program can create, modify, and delete Open vSwitch
-datapaths. A single machine may host up to 256 datapaths (numbered 0
-to 255).
+datapaths. A single machine may host any number of datapaths.
.PP
A newly created datapath is associated with only one network device, a
virtual network device sometimes called the datapath's ``local port''.
The following commands manage datapaths.
.
.TP
-\fBadd\-dp \fIdp\fR [\fInetdev\fR...]
+\fBadd\-dp \fIdp\fR [\fInetdev\fR[\fB,\fIoption\fR]...]
Creates datapath \fIdp\fR, with a local port also named \fIdp\fR.
This will fail if a network device \fIdp\fR already exists.
.IP
-If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
+If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the
+new datapath, just as if \fBadd\-if\fR was specified.
.
.TP
\fBdel\-dp \fIdp\fR
devices, they are automatically removed.
.
.TP
-\fBadd\-if \fIdp netdev\fR[\fIoption\fR...]...
+\fBadd\-if \fIdp netdev\fR[\fB,\fIoption\fR]...
Adds each \fInetdev\fR to the set of network devices datapath
\fIdp\fR monitors, where \fIdp\fR is the name of an existing
datapath, and \fInetdev\fR is the name of one of the host's
\fBovs\-vswitchd.conf.db\fR(5) documents the available port types and
options.
.
+.IP "\fBset\-if \fIdp port\fR[\fB,\fIoption\fR]..."
+Reconfigures each \fIport\fR in \fIdp\fR as specified. An
+\fIoption\fR of the form \fIkey\fB=\fIvalue\fR adds the specified
+key-value option to the port or overrides an existing key's value. An
+\fIoption\fR of the form \fIkey\fB=\fR, that is, without a value,
+deletes the key-value named \fIkey\fR. The type of a port cannot be
+changed, so \fBtype=\fItype\fR is only allowed if \fItype\fR is the
+port's existing type.
.TP
\fBdel\-if \fIdp netdev\fR...
Removes each \fInetdev\fR from the list of network devices datapath
Prints the name of each configured datapath on a separate line.
.
.TP
-\fBshow \fR[\fIdp\fR...]
+[\fB\-s\fR | \fB\-\-statistics\fR] \fBshow \fR[\fIdp\fR...]
Prints a summary of configured datapaths, including their datapath
numbers and a list of ports connected to each datapath. (The local
-port is identified as port 0.)
+port is identified as port 0.) If \fB\-s\fR or \fB\-\-statistics\fR
+is specified, then packet and byte counters are also printed for each
+port.
.IP
If one or more datapaths are specified, information on only those
datapaths are displayed. Otherwise, \fBovs\-dpctl\fR displays information
up may be confused about their disappearance.
.
.SH OPTIONS
-.TP
-\fB\-t\fR, \fB\-\-timeout=\fIsecs\fR
+.IP "\fB\-s\fR"
+.IQ "\fB\-\-statistics\fR"
+Causes the \fBshow\fR command to print packet and byte counters for
+each port within the datapaths that it shows.
+.
+.IP "\fB\-t\fR"
+.IQ "\fB\-\-timeout=\fIsecs\fR"
Limits \fBovs\-dpctl\fR runtime to approximately \fIsecs\fR seconds. If
the timeout expires, \fBovs\-dpctl\fR will exit with a \fBSIGALRM\fR
signal.
.so lib/vlog.man
.so lib/common.man
.
-.SH EXAMPLES
-.
-A typical \fBovs\-dpctl\fR command sequence for controlling an
-Open vSwitch kernel module:
-.
-.TP
-\fBovs\-dpctl add\-dp dp0\fR
-Creates datapath number 0.
-.
-.TP
-\fBovs\-dpctl add\-if dp0 eth0 eth1\fR
-Adds two network devices to the new datapath.
-.
-.PP
-At this point one would ordinarily start \fBovs\-openflowd\fR(8) on
-\fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch. Then, when
-the switch and the datapath is no longer needed:
-.
-.TP
-\fBovs\-dpctl del\-if dp0 eth0 eth1\fR
-Removes network devices from the datapath.
-.
-.TP
-\fBovs\-dpctl del\-dp dp0\fR
-Deletes the datapath.
-.
.SH "SEE ALSO"
.
.BR ovs\-appctl (8),
-.BR ovs\-openflowd (8),
.BR ovs\-vswitchd (8)
projects / openvswitch / blobdiff