+.de IQ
+. br
+. ns
+. IP "\\$1"
+..
.TH ovs\-dpctl 8 "August 2009" "Open vSwitch" "Open vSwitch Manual"
.ds PN ovs\-dpctl
.
.SH DESCRIPTION
.PP
The \fBovs\-dpctl\fR program can create, modify, and delete Open vSwitch
-datapaths. A single machine may host up to 256 datapaths (numbered 0
-to 255).
+datapaths. A single machine may host any number of datapaths.
.PP
A newly created datapath is associated with only one network device, a
virtual network device sometimes called the datapath's ``local port''.
The following commands manage datapaths.
.
.TP
-\fBadd\-dp \fIdp\fR [\fInetdev\fR...]
+\fBadd\-dp \fIdp\fR [\fInetdev\fR[\fB,\fIoption\fR]...]
Creates datapath \fIdp\fR, with a local port also named \fIdp\fR.
This will fail if a network device \fIdp\fR already exists.
.IP
-If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the datapath.
+If \fInetdev\fRs are specified, \fBovs\-dpctl\fR adds them to the
+new datapath, just as if \fBadd\-if\fR was specified.
.
.TP
\fBdel\-dp \fIdp\fR
.RS
.IP "\fBtype=\fItype\fR"
Specifies the type of port to add. The default type is \fBsystem\fR.
+.IP "\fBport_no=\fIport\fR"
+Requests a specific port number within the datapath. If this option is
+not specified then one will be automatically assigned.
.IP "\fIkey\fB=\fIvalue\fR"
Adds an arbitrary key-value option to the port's configuration.
.RE
\fBovs\-vswitchd.conf.db\fR(5) documents the available port types and
options.
.
+.IP "\fBset\-if \fIdp port\fR[\fB,\fIoption\fR]..."
+Reconfigures each \fIport\fR in \fIdp\fR as specified. An
+\fIoption\fR of the form \fIkey\fB=\fIvalue\fR adds the specified
+key-value option to the port or overrides an existing key's value. An
+\fIoption\fR of the form \fIkey\fB=\fR, that is, without a value,
+deletes the key-value named \fIkey\fR. The type and port number of a
+port cannot be changed, so \fBtype\fR and \fBport_no\fR are only allowed if
+they match the existing configuration.
.TP
\fBdel\-if \fIdp netdev\fR...
Removes each \fInetdev\fR from the list of network devices datapath
datapaths are displayed. Otherwise, \fBovs\-dpctl\fR displays information
about all configured datapaths.
.
-.IP "\fBdump\-flows \fIdp\fR"
+.IP "\fBdump\-flows\fR [\fIdp\fR]"
Prints to the console all flow entries in datapath \fIdp\fR's
-flow table.
+flow table. If \fIdp\fR is not specified and exactly one datapath
+exists, the flows for that datapath will be printed.
.IP
This command is primarily useful for debugging Open vSwitch. The flow
table entries that it displays are not
OpenFlow flow entries. Instead, they are different and considerably
-simpler flows maintained by the Open vSwitch kernel module.
-.IP "\fBdel\-flows \fIdp\fR"
-Deletes all flow entries from datapath \fIdp\fR's flow table.
+simpler flows maintained by the Open vSwitch kernel module. If you wish
+to see the OpenFlow flow entries, use \fBovs\-ofctl dump\-flows\fR.
+.
+.IP "\fBdel\-flows\fR [\fIdp\fR]"
+Deletes all flow entries from datapath \fIdp\fR's flow table. If
+\fIdp\fR is not specified and exactly one datapath exists, the flows for
+that datapath will be deleted.
.IP
This command is primarily useful for debugging Open vSwitch. As
discussed in \fBdump\-flows\fR, these entries are
up may be confused about their disappearance.
.
.SH OPTIONS
-.IP "\fB\-s\fR, \fB\-\-statistics\fR"
+.IP "\fB\-s\fR"
+.IQ "\fB\-\-statistics\fR"
Causes the \fBshow\fR command to print packet and byte counters for
each port within the datapaths that it shows.
-.TP
-\fB\-t\fR, \fB\-\-timeout=\fIsecs\fR
+.
+.IP "\fB\-t\fR"
+.IQ "\fB\-\-timeout=\fIsecs\fR"
Limits \fBovs\-dpctl\fR runtime to approximately \fIsecs\fR seconds. If
the timeout expires, \fBovs\-dpctl\fR will exit with a \fBSIGALRM\fR
signal.
.so lib/vlog.man
.so lib/common.man
.
-.SH EXAMPLES
-.
-A typical \fBovs\-dpctl\fR command sequence for controlling an
-Open vSwitch kernel module:
-.
-.TP
-\fBovs\-dpctl add\-dp dp0\fR
-Creates datapath number 0.
-.
-.TP
-\fBovs\-dpctl add\-if dp0 eth0 eth1\fR
-Adds two network devices to the new datapath.
-.
-.PP
-At this point one would ordinarily start \fBovs\-openflowd\fR(8) on
-\fBdp0\fR, transforming \fBdp0\fR into an OpenFlow switch. Then, when
-the switch and the datapath is no longer needed:
-.
-.TP
-\fBovs\-dpctl del\-if dp0 eth0 eth1\fR
-Removes network devices from the datapath.
-.
-.TP
-\fBovs\-dpctl del\-dp dp0\fR
-Deletes the datapath.
-.
.SH "SEE ALSO"
.
.BR ovs\-appctl (8),
-.BR ovs\-openflowd (8),
.BR ovs\-vswitchd (8)
projects / openvswitch / blobdiff