AT_SETUP([database commands -- positive checks])
AT_KEYWORDS([ovs-vsctl])
OVS_VSCTL_SETUP
-AT_CHECK([RUN_OVS_VSCTL([--force create b name=br0])],
+AT_CHECK([RUN_OVS_VSCTL([create b name=br0])],
[0], [stdout], [], [OVS_VSCTL_CLEANUP])
cp stdout out1
AT_CHECK([RUN_OVS_VSCTL([list b])],
cp stdout out2
AT_CHECK([perl $srcdir/uuidfilt.pl out1 out2], [0],
[[<0>
-_uuid (RO): <0>
-controller (RO): []
-datapath_id (RO): []
-datapath_type (RO): ""
-external_ids (RW): {}
-flood_vlans (RW): []
-mirrors (RO): []
-name (RO): "br0"
-netflow (RO): []
-other_config (RW): {}
-ports (RO): []
+_uuid : <0>
+controller : []
+datapath_id : []
+datapath_type : ""
+external_ids : {}
+flood_vlans : []
+mirrors : []
+name : "br0"
+netflow : []
+other_config : {}
+ports : []
+sflow : []
]], [ignore], [test ! -e pid || kill `cat pid`])
AT_CHECK(
[RUN_OVS_VSCTL(
AT_CHECK([RUN_OVS_VSCTL([clear br br0 external-ids -- get br br0 external_ids])],
[0], [{}
], [], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([--force destroy b br0])],
+AT_CHECK([RUN_OVS_VSCTL([destroy b br0])],
[0], [stdout], [], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([list b])],
[0], [], [], [OVS_VSCTL_CLEANUP])
AT_SETUP([database commands -- negative checks])
AT_KEYWORDS([ovs-vsctl])
OVS_VSCTL_SETUP
-AT_CHECK([RUN_OVS_VSCTL([--force create b name=br0])],
+AT_CHECK([RUN_OVS_VSCTL([create b name=br0])],
[0], [ignore], [], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([add-br br1])],
[0], [ignore], [], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([set-controller br1 tcp:127.0.0.1])],
[0], [ignore], [], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([--force create n targets='"1.2.3.4:567"'])],
+AT_CHECK([RUN_OVS_VSCTL([create n targets='"1.2.3.4:567"'])],
[0], [stdout], [], [OVS_VSCTL_CLEANUP])
cp stdout netflow-uuid
AT_CHECK([RUN_OVS_VSCTL([list n `cat netflow-uuid`])],
[0], [stdout], [], [OVS_VSCTL_CLEANUP])
AT_CHECK([perl $srcdir/uuidfilt.pl netflow-uuid stdout], [0],
[[<0>
-_uuid (RO): <0>
-active_timeout (RW): 0
-add_id_to_interface (RW): false
-engine_id (RW): []
-engine_type (RW): []
-targets (RW): ["1.2.3.4:567"]
+_uuid : <0>
+active_timeout : 0
+add_id_to_interface : false
+engine_id : []
+engine_type : []
+targets : ["1.2.3.4:567"]
]], [ignore], [test ! -e pid || kill `cat pid`])
AT_CHECK([RUN_OVS_VSCTL([list interx x])],
[1], [], [ovs-vsctl: unknown table "interx"
[1], [], [ovs-vsctl: no key "x" in Bridge record "br0" column external_ids
], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([set b br0 flood_vlans=-1])],
- [1], [], [ovs-vsctl: -1 is outside the valid range 1 to 4095 (inclusive)
+ [1], [], [ovs-vsctl: constraint violation: -1 is not in the valid range 0 to 4095 (inclusive)
], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([set b br0 flood_vlans=4096])],
- [1], [], [ovs-vsctl: 4096 is outside the valid range 1 to 4095 (inclusive)
-], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([set b br0 datapath_id=4096])],
- [1], [], [ovs-vsctl: datapath_id=4096: cannot modify read-only column datapath_id in table Bridge
+ [1], [], [ovs-vsctl: constraint violation: 4096 is not in the valid range 0 to 4095 (inclusive)
], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([set c br1 'connection-mode=xyz'])],
- [1], [], [ovs-vsctl: xyz is not valid (it does not match ^in-band|out-of-band$)
+ [1], [], [ovs-vsctl: constraint violation: "xyz" is not a either "in-band" or "out-of-band"
], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([set c br1 connection-mode:x=y])],
[1], [], [ovs-vsctl: cannot specify key to set for non-map column connection_mode
], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([add b br1 datapath_id x=y])],
- [1], [], [ovs-vsctl: cannot modify read-only column datapath_id in table Bridge
-], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([--force add b br1 datapath_id x y])],
+AT_CHECK([RUN_OVS_VSCTL([add b br1 datapath_id x y])],
[1], [], [ovs-vsctl: "add" operation would put 2 values in column datapath_id of table Bridge but the maximum number is 1
], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([remove b br1 datapath_id x=y])],
- [1], [], [ovs-vsctl: cannot modify read-only column datapath_id in table Bridge
-], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([remove n `cat netflow-uuid` targets '"1.2.3.4:567"'])],
[1], [], [ovs-vsctl: "remove" operation would put 0 values in column targets of table NetFlow but the minimun number is 1
], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([clear bri br0 netflow])],
- [1], [], [ovs-vsctl: cannot modify read-only column netflow in table Bridge
-], [OVS_VSCTL_CLEANUP])
AT_CHECK([RUN_OVS_VSCTL([clear n `cat netflow-uuid` targets])],
[1], [], [ovs-vsctl: "clear" operation cannot be applied to column targets of table NetFlow, which is not allowed to be empty
], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([create b name=br2])],
- [1], [], [ovs-vsctl: "create" requires --force
-], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([destroy b br0])],
- [1], [], [ovs-vsctl: "destroy" requires --force
-], [OVS_VSCTL_CLEANUP])
-AT_CHECK([RUN_OVS_VSCTL([--force destroy b br2])],
+AT_CHECK([RUN_OVS_VSCTL([destroy b br2])],
[1], [], [ovs-vsctl: no row "br2" in table Bridge
], [OVS_VSCTL_CLEANUP])
OVS_VSCTL_CLEANUP
AT_SETUP([created row UUID is wrong in same execution])
AT_KEYWORDS([ovs-vsctl])
OVS_VSCTL_SETUP
-AT_CHECK([RUN_OVS_VSCTL([--force create Bridge name=br0 -- list b])],
+AT_CHECK([RUN_OVS_VSCTL([create Bridge name=br0 -- list b])],
[0], [stdout], [], [OVS_VSCTL_CLEANUP])
AT_CHECK([perl $srcdir/uuidfilt.pl stdout], [0],
[[<0>
-_uuid (RO): <1>
-controller (RO): []
-datapath_id (RO): []
-datapath_type (RO): ""
-external_ids (RW): {}
-flood_vlans (RW): []
-mirrors (RO): []
-name (RO): "br0"
-netflow (RO): []
-other_config (RW): {}
-ports (RO): []
+_uuid : <1>
+controller : []
+datapath_id : []
+datapath_type : ""
+external_ids : {}
+flood_vlans : []
+mirrors : []
+name : "br0"
+netflow : []
+other_config : {}
+ports : []
+sflow : []
]], [ignore], [test ! -e pid || kill `cat pid`])
OVS_VSCTL_CLEANUP
AT_CLEANUP
projects / openvswitch / blobdiff