/*
- * Copyright (c) 2008, 2009, 2010 Nicira Networks.
+ * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
#include <arpa/inet.h>
#include <errno.h>
#include <inttypes.h>
+#include <sys/socket.h>
#include <net/if.h>
#include <string.h>
#include <stdlib.h>
+#include "classifier.h"
#include "dhcp.h"
-#include "dpif.h"
#include "flow.h"
-#include "mac-learning.h"
#include "netdev.h"
+#include "netlink.h"
#include "odp-util.h"
-#include "ofp-print.h"
+#include "ofp-actions.h"
#include "ofproto.h"
#include "ofpbuf.h"
+#include "ofproto-provider.h"
#include "openflow/openflow.h"
-#include "openvswitch/datapath-protocol.h"
#include "packets.h"
#include "poll-loop.h"
-#include "rconn.h"
-#include "status.h"
#include "timeval.h"
-#include "vconn.h"
-
-#define THIS_MODULE VLM_in_band
#include "vlog.h"
-/* In-band control allows a single network to be used for OpenFlow
- * traffic and other data traffic. Refer to ovs-vswitchd.conf(5) and
- * secchan(8) for a description of configuring in-band control.
- *
- * This comment is an attempt to describe how in-band control works at a
- * wire- and implementation-level. Correctly implementing in-band
- * control has proven difficult due to its many subtleties, and has thus
- * gone through many iterations. Please read through and understand the
- * reasoning behind the chosen rules before making modifications.
- *
- * In Open vSwitch, in-band control is implemented as "hidden" flows (in
- * that they are not visible through OpenFlow) and at a higher priority
- * than wildcarded flows can be set up by the controller. This is done
- * so that the controller cannot interfere with them and possibly break
- * connectivity with its switches. It is possible to see all flows,
- * including in-band ones, with the ovs-appctl "bridge/dump-flows"
- * command.
- *
- * The following rules are always enabled with the "normal" action by a
- * switch with in-band control:
- *
- * a. DHCP requests sent from the local port.
- * b. ARP replies to the local port's MAC address.
- * c. ARP requests from the local port's MAC address.
- * d. ARP replies to the remote side's MAC address. Note that the
- * remote side is either the controller or the gateway to reach
- * the controller.
- * e. ARP requests from the remote side's MAC address. Note that
- * like (d), the MAC is either for the controller or gateway.
- * f. ARP replies containing the controller's IP address as a target.
- * g. ARP requests containing the controller's IP address as a source.
- * h. OpenFlow (6633/tcp) traffic to the controller's IP.
- * i. OpenFlow (6633/tcp) traffic from the controller's IP.
- *
- * The goal of these rules is to be as narrow as possible to allow a
- * switch to join a network and be able to communicate with a
- * controller. As mentioned earlier, these rules have higher priority
- * than the controller's rules, so if they are too broad, they may
- * prevent the controller from implementing its policy. As such,
- * in-band actively monitors some aspects of flow and packet processing
- * so that the rules can be made more precise.
- *
- * In-band control monitors attempts to add flows into the datapath that
- * could interfere with its duties. The datapath only allows exact
- * match entries, so in-band control is able to be very precise about
- * the flows it prevents. Flows that miss in the datapath are sent to
- * userspace to be processed, so preventing these flows from being
- * cached in the "fast path" does not affect correctness. The only type
- * of flow that is currently prevented is one that would prevent DHCP
- * replies from being seen by the local port. For example, a rule that
- * forwarded all DHCP traffic to the controller would not be allowed,
- * but one that forwarded to all ports (including the local port) would.
- *
- * As mentioned earlier, packets that miss in the datapath are sent to
- * the userspace for processing. The userspace has its own flow table,
- * the "classifier", so in-band checks whether any special processing
- * is needed before the classifier is consulted. If a packet is a DHCP
- * response to a request from the local port, the packet is forwarded to
- * the local port, regardless of the flow table. Note that this requires
- * L7 processing of DHCP replies to determine whether the 'chaddr' field
- * matches the MAC address of the local port.
- *
- * It is interesting to note that for an L3-based in-band control
- * mechanism, the majority of rules are devoted to ARP traffic. At first
- * glance, some of these rules appear redundant. However, each serves an
- * important role. First, in order to determine the MAC address of the
- * remote side (controller or gateway) for other ARP rules, we must allow
- * ARP traffic for our local port with rules (b) and (c). If we are
- * between a switch and its connection to the controller, we have to
- * allow the other switch's ARP traffic to through. This is done with
- * rules (d) and (e), since we do not know the addresses of the other
- * switches a priori, but do know the controller's or gateway's. Finally,
- * if the controller is running in a local guest VM that is not reached
- * through the local port, the switch that is connected to the VM must
- * allow ARP traffic based on the controller's IP address, since it will
- * not know the MAC address of the local port that is sending the traffic
- * or the MAC address of the controller in the guest VM.
- *
- * With a few notable exceptions below, in-band should work in most
- * network setups. The following are considered "supported' in the
- * current implementation:
- *
- * - Locally Connected. The switch and controller are on the same
- * subnet. This uses rules (a), (b), (c), (h), and (i).
- *
- * - Reached through Gateway. The switch and controller are on
- * different subnets and must go through a gateway. This uses
- * rules (a), (b), (c), (h), and (i).
- *
- * - Between Switch and Controller. This switch is between another
- * switch and the controller, and we want to allow the other
- * switch's traffic through. This uses rules (d), (e), (h), and
- * (i). It uses (b) and (c) indirectly in order to know the MAC
- * address for rules (d) and (e). Note that DHCP for the other
- * switch will not work unless the controller explicitly lets this
- * switch pass the traffic.
- *
- * - Between Switch and Gateway. This switch is between another
- * switch and the gateway, and we want to allow the other switch's
- * traffic through. This uses the same rules and logic as the
- * "Between Switch and Controller" configuration described earlier.
- *
- * - Controller on Local VM. The controller is a guest VM on the
- * system running in-band control. This uses rules (a), (b), (c),
- * (h), and (i).
- *
- * - Controller on Local VM with Different Networks. The controller
- * is a guest VM on the system running in-band control, but the
- * local port is not used to connect to the controller. For
- * example, an IP address is configured on eth0 of the switch. The
- * controller's VM is connected through eth1 of the switch, but an
- * IP address has not been configured for that port on the switch.
- * As such, the switch will use eth0 to connect to the controller,
- * and eth1's rules about the local port will not work. In the
- * example, the switch attached to eth0 would use rules (a), (b),
- * (c), (h), and (i) on eth0. The switch attached to eth1 would use
- * rules (f), (g), (h), and (i).
- *
- * The following are explicitly *not* supported by in-band control:
- *
- * - Specify Controller by Name. Currently, the controller must be
- * identified by IP address. A naive approach would be to permit
- * all DNS traffic. Unfortunately, this would prevent the
- * controller from defining any policy over DNS. Since switches
- * that are located behind us need to connect to the controller,
- * in-band cannot simply add a rule that allows DNS traffic from
- * the local port. The "correct" way to support this is to parse
- * DNS requests to allow all traffic related to a request for the
- * controller's name through. Due to the potential security
- * problems and amount of processing, we decided to hold off for
- * the time-being.
- *
- * - Differing Controllers for Switches. All switches must know
- * the L3 addresses for all the controllers that other switches
- * may use, since rules need to be set up to allow traffic related
- * to those controllers through. See rules (f), (g), (h), and (i).
- *
- * - Differing Routes for Switches. In order for the switch to
- * allow other switches to connect to a controller through a
- * gateway, it allows the gateway's traffic through with rules (d)
- * and (e). If the routes to the controller differ for the two
- * switches, we will not know the MAC address of the alternate
- * gateway.
- */
+VLOG_DEFINE_THIS_MODULE(in_band);
/* Priorities used in classifier for in-band rules. These values are higher
* than any that may be set with OpenFlow, and "18" kind of looks like "IB".
* by in-band control have the same action. The only reason to use more than
* one priority is to make the kind of flow easier to see during debugging. */
enum {
+ /* One set per bridge. */
IBR_FROM_LOCAL_DHCP = 180000, /* (a) From local port, DHCP. */
IBR_TO_LOCAL_ARP, /* (b) To local port, ARP. */
IBR_FROM_LOCAL_ARP, /* (c) From local port, ARP. */
- IBR_TO_REMOTE_ARP, /* (d) To remote MAC, ARP. */
- IBR_FROM_REMOTE_ARP, /* (e) From remote MAC, ARP. */
- IBR_TO_CTL_ARP, /* (f) To controller IP, ARP. */
- IBR_FROM_CTL_ARP, /* (g) From controller IP, ARP. */
- IBR_TO_CTL_OFP, /* (h) To controller, OpenFlow port. */
- IBR_FROM_CTL_OFP /* (i) From controller, OpenFlow port. */
-};
-struct in_band_rule {
- flow_t flow;
- uint32_t wildcards;
- unsigned int priority;
+ /* One set per unique next-hop MAC. */
+ IBR_TO_NEXT_HOP_ARP, /* (d) To remote MAC, ARP. */
+ IBR_FROM_NEXT_HOP_ARP, /* (e) From remote MAC, ARP. */
+
+ /* One set per unique remote IP address. */
+ IBR_TO_REMOTE_ARP, /* (f) To remote IP, ARP. */
+ IBR_FROM_REMOTE_ARP, /* (g) From remote IP, ARP. */
+
+ /* One set per unique remote (IP,port) pair. */
+ IBR_TO_REMOTE_TCP, /* (h) To remote IP, TCP port. */
+ IBR_FROM_REMOTE_TCP /* (i) From remote IP, TCP port. */
};
/* Track one remote IP and next hop information. */
struct in_band_remote {
- struct rconn *rconn; /* Connection to remote. */
- uint32_t remote_ip; /* Remote IP, 0 if unknown. */
+ struct sockaddr_in remote_addr; /* IP address, in network byte order. */
uint8_t remote_mac[ETH_ADDR_LEN]; /* Next-hop MAC, all-zeros if unknown. */
uint8_t last_remote_mac[ETH_ADDR_LEN]; /* Previous nonzero next-hop MAC. */
struct netdev *remote_netdev; /* Device to send to next-hop MAC. */
};
+/* What to do to an in_band_rule. */
+enum in_band_op {
+ ADD, /* Add the rule to ofproto's flow table. */
+ DELETE /* Delete the rule from ofproto's flow table. */
+};
+
+/* A rule to add to or delete from ofproto's flow table. */
+struct in_band_rule {
+ struct hmap_node hmap_node; /* In struct in_band's "rules" hmap. */
+ struct match match;
+ unsigned int priority;
+ enum in_band_op op;
+};
+
struct in_band {
struct ofproto *ofproto;
- struct status_category *ss_cat;
+ int queue_id;
/* Remote information. */
time_t next_remote_refresh; /* Refresh timer. */
uint8_t local_mac[ETH_ADDR_LEN]; /* Current MAC. */
struct netdev *local_netdev; /* Local port's network device. */
- /* Local and remote addresses that are installed as flows. */
- uint8_t installed_local_mac[ETH_ADDR_LEN];
- uint32_t *remote_ips;
- uint32_t n_remote_ips;
- uint8_t *remote_macs;
- size_t n_remote_macs;
+ /* Flow tracking. */
+ struct hmap rules; /* Contains "struct in_band_rule"s. */
};
static struct vlog_rate_limit rl = VLOG_RATE_LIMIT_INIT(60, 60);
static int
refresh_remote(struct in_band *ib, struct in_band_remote *r)
{
- struct in_addr remote_inaddr;
struct in_addr next_hop_inaddr;
char *next_hop_dev;
int retval;
- memset(r->remote_mac, 0, sizeof r->remote_mac);
-
- /* Get remote IP address. */
- r->remote_ip = rconn_get_remote_ip(r->rconn);
- if (!r->remote_ip) {
- /* No remote IP address means that this rconn is probably either
- * configured for a non-IP based protocol (e.g. "unix:") or
- * misconfigured entirely. No point in refreshing quickly. */
- return 10;
- }
-
/* Find the next-hop IP address. */
- remote_inaddr.s_addr = r->remote_ip;
- retval = netdev_get_next_hop(ib->local_netdev, &remote_inaddr,
+ memset(r->remote_mac, 0, sizeof r->remote_mac);
+ retval = netdev_get_next_hop(ib->local_netdev, &r->remote_addr.sin_addr,
&next_hop_inaddr, &next_hop_dev);
if (retval) {
VLOG_WARN("cannot find route for controller ("IP_FMT"): %s",
- IP_ARGS(&r->remote_ip), strerror(retval));
+ IP_ARGS(&r->remote_addr.sin_addr), strerror(retval));
return 1;
}
if (!next_hop_inaddr.s_addr) {
- next_hop_inaddr.s_addr = remote_inaddr.s_addr;
+ next_hop_inaddr = r->remote_addr.sin_addr;
}
- /* Get the next-hop IP and network device. */
+ /* Open the next-hop network device. */
if (!r->remote_netdev
|| strcmp(netdev_get_name(r->remote_netdev), next_hop_dev))
{
netdev_close(r->remote_netdev);
- retval = netdev_open_default(next_hop_dev, &r->remote_netdev);
+ retval = netdev_open(next_hop_dev, "system", &r->remote_netdev);
if (retval) {
VLOG_WARN_RL(&rl, "cannot open netdev %s (next hop "
"to controller "IP_FMT"): %s",
- next_hop_dev, IP_ARGS(&r->remote_ip),
+ next_hop_dev, IP_ARGS(&r->remote_addr.sin_addr),
strerror(retval));
free(next_hop_dev);
return 1;
return true;
}
-static void
-in_band_status_cb(struct status_reply *sr, void *in_band_)
-{
- struct in_band *in_band = in_band_;
-
- if (!eth_addr_is_zero(in_band->local_mac)) {
- status_reply_put(sr, "local-mac="ETH_ADDR_FMT,
- ETH_ADDR_ARGS(in_band->local_mac));
- }
-
- if (in_band->n_remotes
- && !eth_addr_is_zero(in_band->remotes[0].remote_mac)) {
- status_reply_put(sr, "remote-mac="ETH_ADDR_FMT,
- ETH_ADDR_ARGS(in_band->remotes[0].remote_mac));
- }
-}
-
/* Returns true if 'packet' should be sent to the local port regardless
- * of the flow table. */
+ * of the flow table. */
bool
-in_band_msg_in_hook(struct in_band *in_band, const flow_t *flow,
+in_band_msg_in_hook(struct in_band *in_band, const struct flow *flow,
const struct ofpbuf *packet)
{
- if (!in_band) {
- return false;
- }
-
/* Regardless of how the flow table is configured, we want to be
* able to see replies to our DHCP requests. */
if (flow->dl_type == htons(ETH_TYPE_IP)
- && flow->nw_proto == IP_TYPE_UDP
+ && flow->nw_proto == IPPROTO_UDP
&& flow->tp_src == htons(DHCP_SERVER_PORT)
&& flow->tp_dst == htons(DHCP_CLIENT_PORT)
&& packet->l7) {
return false;
}
-/* Returns true if the rule that would match 'flow' with 'actions' is
+/* Returns true if the rule that would match 'flow' with 'actions' is
* allowed to be set up in the datapath. */
bool
-in_band_rule_check(struct in_band *in_band, const flow_t *flow,
- const struct odp_actions *actions)
+in_band_rule_check(const struct flow *flow,
+ const struct nlattr *actions, size_t actions_len)
{
- if (!in_band) {
- return true;
- }
-
/* Don't allow flows that would prevent DHCP replies from being seen
* by the local port. */
if (flow->dl_type == htons(ETH_TYPE_IP)
- && flow->nw_proto == IP_TYPE_UDP
- && flow->tp_src == htons(DHCP_SERVER_PORT)
+ && flow->nw_proto == IPPROTO_UDP
+ && flow->tp_src == htons(DHCP_SERVER_PORT)
&& flow->tp_dst == htons(DHCP_CLIENT_PORT)) {
- int i;
+ const struct nlattr *a;
+ unsigned int left;
- for (i=0; i<actions->n_actions; i++) {
- if (actions->actions[i].output.type == ODPAT_OUTPUT
- && actions->actions[i].output.port == ODPP_LOCAL) {
+ NL_ATTR_FOR_EACH_UNSAFE (a, left, actions, actions_len) {
+ if (nl_attr_type(a) == OVS_ACTION_ATTR_OUTPUT
+ && nl_attr_get_u32(a) == OVSP_LOCAL) {
return true;
- }
+ }
}
return false;
}
}
static void
-init_rule(struct in_band_rule *rule, unsigned int priority)
-{
- rule->wildcards = OVSFW_ALL;
- rule->priority = priority;
-
- /* Not strictly necessary but seems cleaner. */
- memset(&rule->flow, 0, sizeof rule->flow);
-}
-
-static void
-set_in_port(struct in_band_rule *rule, uint16_t odp_port)
+add_rule(struct in_band *ib, const struct match *match, unsigned int priority)
{
- rule->wildcards &= ~OFPFW_IN_PORT;
- rule->flow.in_port = odp_port;
-}
+ uint32_t hash = match_hash(match, 0);
+ struct in_band_rule *rule;
-static void
-set_dl_type(struct in_band_rule *rule, uint16_t dl_type)
-{
- rule->wildcards &= ~OFPFW_DL_TYPE;
- rule->flow.dl_type = htons(dl_type);
-}
-
-static void
-set_dl_src(struct in_band_rule *rule, const uint8_t dl_src[ETH_ADDR_LEN])
-{
- rule->wildcards &= ~OFPFW_DL_SRC;
- memcpy(rule->flow.dl_src, dl_src, ETH_ADDR_LEN);
-}
-
-static void
-set_dl_dst(struct in_band_rule *rule, const uint8_t dl_dst[ETH_ADDR_LEN])
-{
- rule->wildcards &= ~OFPFW_DL_DST;
- memcpy(rule->flow.dl_dst, dl_dst, ETH_ADDR_LEN);
-}
-
-static void
-set_tp_src(struct in_band_rule *rule, uint16_t tp_src)
-{
- rule->wildcards &= ~OFPFW_TP_SRC;
- rule->flow.tp_src = htons(tp_src);
-}
-
-static void
-set_tp_dst(struct in_band_rule *rule, uint16_t tp_dst)
-{
- rule->wildcards &= ~OFPFW_TP_DST;
- rule->flow.tp_dst = htons(tp_dst);
-}
-
-static void
-set_nw_proto(struct in_band_rule *rule, uint8_t nw_proto)
-{
- rule->wildcards &= ~OFPFW_NW_PROTO;
- rule->flow.nw_proto = nw_proto;
-}
-
-static void
-set_nw_src(struct in_band_rule *rule, uint32_t nw_src)
-{
- rule->wildcards &= ~OFPFW_NW_SRC_MASK;
- rule->flow.nw_src = nw_src;
-}
+ HMAP_FOR_EACH_WITH_HASH (rule, hmap_node, hash, &ib->rules) {
+ if (match_equal(&rule->match, match)) {
+ rule->op = ADD;
+ return;
+ }
+ }
-static void
-set_nw_dst(struct in_band_rule *rule, uint32_t nw_dst)
-{
- rule->wildcards &= ~OFPFW_NW_DST_MASK;
- rule->flow.nw_dst = nw_dst;
+ rule = xmalloc(sizeof *rule);
+ rule->match = *match;
+ rule->priority = priority;
+ rule->op = ADD;
+ hmap_insert(&ib->rules, &rule->hmap_node, hash);
}
static void
-make_rules(struct in_band *ib,
- void (*cb)(struct in_band *, const struct in_band_rule *))
+update_rules(struct in_band *ib)
{
- struct in_band_rule rule;
- size_t i;
+ struct in_band_rule *ib_rule;
+ struct in_band_remote *r;
+ struct match match;
- if (!eth_addr_is_zero(ib->installed_local_mac)) {
- /* Allow DHCP requests to be sent from the local port. */
- init_rule(&rule, IBR_FROM_LOCAL_DHCP);
- set_in_port(&rule, ODPP_LOCAL);
- set_dl_type(&rule, ETH_TYPE_IP);
- set_dl_src(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, IP_TYPE_UDP);
- set_tp_src(&rule, DHCP_CLIENT_PORT);
- set_tp_dst(&rule, DHCP_SERVER_PORT);
- cb(ib, &rule);
-
- /* Allow the connection's interface to receive directed ARP traffic. */
- init_rule(&rule, IBR_TO_LOCAL_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_dl_dst(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, ARP_OP_REPLY);
- cb(ib, &rule);
-
- /* Allow the connection's interface to be the source of ARP traffic. */
- init_rule(&rule, IBR_FROM_LOCAL_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_dl_src(&rule, ib->installed_local_mac);
- set_nw_proto(&rule, ARP_OP_REQUEST);
- cb(ib, &rule);
+ /* Mark all the existing rules for deletion. (Afterward we will re-add any
+ * rules that are still valid.) */
+ HMAP_FOR_EACH (ib_rule, hmap_node, &ib->rules) {
+ ib_rule->op = DELETE;
}
- for (i = 0; i < ib->n_remote_macs; i++) {
- const uint8_t *remote_mac = &ib->remote_macs[i * ETH_ADDR_LEN];
-
- if (i > 0) {
- const uint8_t *prev_mac = &ib->remote_macs[(i - 1) * ETH_ADDR_LEN];
- if (eth_addr_equals(remote_mac, prev_mac)) {
- /* Skip duplicates. */
- continue;
- }
- }
-
- /* Allow ARP replies to the remote side's MAC. */
- init_rule(&rule, IBR_TO_REMOTE_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_dl_dst(&rule, remote_mac);
- set_nw_proto(&rule, ARP_OP_REPLY);
- cb(ib, &rule);
-
- /* Allow ARP requests from the remote side's MAC. */
- init_rule(&rule, IBR_FROM_REMOTE_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_dl_src(&rule, remote_mac);
- set_nw_proto(&rule, ARP_OP_REQUEST);
- cb(ib, &rule);
+ if (ib->n_remotes && !eth_addr_is_zero(ib->local_mac)) {
+ /* (a) Allow DHCP requests sent from the local port. */
+ match_init_catchall(&match);
+ match_set_in_port(&match, OFPP_LOCAL);
+ match_set_dl_type(&match, htons(ETH_TYPE_IP));
+ match_set_dl_src(&match, ib->local_mac);
+ match_set_nw_proto(&match, IPPROTO_UDP);
+ match_set_tp_src(&match, htons(DHCP_CLIENT_PORT));
+ match_set_tp_dst(&match, htons(DHCP_SERVER_PORT));
+ add_rule(ib, &match, IBR_FROM_LOCAL_DHCP);
+
+ /* (b) Allow ARP replies to the local port's MAC address. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_dl_dst(&match, ib->local_mac);
+ match_set_nw_proto(&match, ARP_OP_REPLY);
+ add_rule(ib, &match, IBR_TO_LOCAL_ARP);
+
+ /* (c) Allow ARP requests from the local port's MAC address. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_dl_src(&match, ib->local_mac);
+ match_set_nw_proto(&match, ARP_OP_REQUEST);
+ add_rule(ib, &match, IBR_FROM_LOCAL_ARP);
}
- for (i = 0; i < ib->n_remote_ips; i++) {
- uint32_t remote_ip = ib->remote_ips[i];
+ for (r = ib->remotes; r < &ib->remotes[ib->n_remotes]; r++) {
+ const uint8_t *remote_mac = r->remote_mac;
- if (i > 0 && ib->remote_ips[i - 1] == remote_ip) {
- /* Skip duplicates. */
+ if (eth_addr_is_zero(remote_mac)) {
continue;
}
- /* Allow ARP replies to the controller's IP. */
- init_rule(&rule, IBR_TO_CTL_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_nw_proto(&rule, ARP_OP_REPLY);
- set_nw_dst(&rule, remote_ip);
- cb(ib, &rule);
-
- /* Allow ARP requests from the controller's IP. */
- init_rule(&rule, IBR_FROM_CTL_ARP);
- set_dl_type(&rule, ETH_TYPE_ARP);
- set_nw_proto(&rule, ARP_OP_REQUEST);
- set_nw_src(&rule, remote_ip);
- cb(ib, &rule);
-
- /* OpenFlow traffic to the controller. */
- init_rule(&rule, IBR_TO_CTL_OFP);
- set_dl_type(&rule, ETH_TYPE_IP);
- set_nw_proto(&rule, IP_TYPE_TCP);
- set_nw_dst(&rule, remote_ip);
- set_tp_dst(&rule, OFP_TCP_PORT);
- cb(ib, &rule);
-
- /* OpenFlow traffic from the controller. */
- init_rule(&rule, IBR_FROM_CTL_OFP);
- set_dl_type(&rule, ETH_TYPE_IP);
- set_nw_proto(&rule, IP_TYPE_TCP);
- set_nw_src(&rule, remote_ip);
- set_tp_src(&rule, OFP_TCP_PORT);
- cb(ib, &rule);
+ /* (d) Allow ARP replies to the next hop's MAC address. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_dl_dst(&match, remote_mac);
+ match_set_nw_proto(&match, ARP_OP_REPLY);
+ add_rule(ib, &match, IBR_TO_NEXT_HOP_ARP);
+
+ /* (e) Allow ARP requests from the next hop's MAC address. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_dl_src(&match, remote_mac);
+ match_set_nw_proto(&match, ARP_OP_REQUEST);
+ add_rule(ib, &match, IBR_FROM_NEXT_HOP_ARP);
}
-}
-
-static void
-drop_rule(struct in_band *ib, const struct in_band_rule *rule)
-{
- ofproto_delete_flow(ib->ofproto, &rule->flow,
- rule->wildcards, rule->priority);
-}
-
-/* Drops from the flow table all of the flows set up by 'ib', then clears out
- * the information about the installed flows so that they can be filled in
- * again if necessary. */
-static void
-drop_rules(struct in_band *ib)
-{
- /* Drop rules. */
- make_rules(ib, drop_rule);
-
- /* Clear out state. */
- memset(ib->installed_local_mac, 0, sizeof ib->installed_local_mac);
-
- free(ib->remote_ips);
- ib->remote_ips = NULL;
- ib->n_remote_ips = 0;
- free(ib->remote_macs);
- ib->remote_macs = NULL;
- ib->n_remote_macs = 0;
-}
-
-static void
-add_rule(struct in_band *ib, const struct in_band_rule *rule)
-{
- union ofp_action action;
-
- action.type = htons(OFPAT_OUTPUT);
- action.output.len = htons(sizeof action);
- action.output.port = htons(OFPP_NORMAL);
- action.output.max_len = htons(0);
- ofproto_add_flow(ib->ofproto, &rule->flow, rule->wildcards,
- rule->priority, &action, 1, 0);
-}
-
-/* Inserts flows into the flow table for the current state of 'ib'. */
-static void
-add_rules(struct in_band *ib)
-{
- make_rules(ib, add_rule);
-}
-
-static int
-compare_ips(const void *a, const void *b)
-{
- return memcmp(a, b, sizeof(uint32_t));
-}
-
-static int
-compare_macs(const void *a, const void *b)
-{
- return memcmp(a, b, ETH_ADDR_LEN);
+ for (r = ib->remotes; r < &ib->remotes[ib->n_remotes]; r++) {
+ const struct sockaddr_in *a = &r->remote_addr;
+
+ /* (f) Allow ARP replies containing the remote's IP address as a
+ * target. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_nw_proto(&match, ARP_OP_REPLY);
+ match_set_nw_dst(&match, a->sin_addr.s_addr);
+ add_rule(ib, &match, IBR_TO_REMOTE_ARP);
+
+ /* (g) Allow ARP requests containing the remote's IP address as a
+ * source. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_ARP));
+ match_set_nw_proto(&match, ARP_OP_REQUEST);
+ match_set_nw_src(&match, a->sin_addr.s_addr);
+ add_rule(ib, &match, IBR_FROM_REMOTE_ARP);
+
+ /* (h) Allow TCP traffic to the remote's IP and port. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_IP));
+ match_set_nw_proto(&match, IPPROTO_TCP);
+ match_set_nw_dst(&match, a->sin_addr.s_addr);
+ match_set_tp_dst(&match, a->sin_port);
+ add_rule(ib, &match, IBR_TO_REMOTE_TCP);
+
+ /* (i) Allow TCP traffic from the remote's IP and port. */
+ match_init_catchall(&match);
+ match_set_dl_type(&match, htons(ETH_TYPE_IP));
+ match_set_nw_proto(&match, IPPROTO_TCP);
+ match_set_nw_src(&match, a->sin_addr.s_addr);
+ match_set_tp_src(&match, a->sin_port);
+ add_rule(ib, &match, IBR_FROM_REMOTE_TCP);
+ }
}
-void
+/* Updates the OpenFlow flow table for the current state of in-band control.
+ * Returns true ordinarily. Returns false if no remotes are configured on 'ib'
+ * and 'ib' doesn't have any rules left to remove from the OpenFlow flow
+ * table. Thus, a false return value means that the caller can destroy 'ib'
+ * without leaving extra flows hanging around in the flow table. */
+bool
in_band_run(struct in_band *ib)
{
- struct in_band_remote *r;
- bool local_change, remote_change;
+ uint64_t ofpacts_stub[128 / 8];
+ struct ofpbuf ofpacts;
- local_change = refresh_local(ib);
- remote_change = refresh_remotes(ib);
- if (!local_change && !remote_change) {
- /* Nothing changed, nothing to do. */
- return;
- }
+ struct in_band_rule *rule, *next;
- /* Drop old rules. */
- drop_rules(ib);
+ ofpbuf_use_stub(&ofpacts, ofpacts_stub, sizeof ofpacts_stub);
- /* Figure out new rules. */
- memcpy(ib->installed_local_mac, ib->local_mac, ETH_ADDR_LEN);
- ib->remote_ips = xmalloc(ib->n_remotes * sizeof *ib->remote_ips);
- ib->n_remote_ips = 0;
- ib->remote_macs = xmalloc(ib->n_remotes * ETH_ADDR_LEN);
- ib->n_remote_macs = 0;
- for (r = ib->remotes; r < &ib->remotes[ib->n_remotes]; r++) {
- if (r->remote_ip) {
- ib->remote_ips[ib->n_remote_ips++] = r->remote_ip;
- }
- if (!eth_addr_is_zero(r->remote_mac)) {
- memcpy(&ib->remote_macs[ib->n_remote_macs * ETH_ADDR_LEN],
- r->remote_mac, ETH_ADDR_LEN);
- ib->n_remote_macs++;
+ if (ib->queue_id >= 0) {
+ ofpact_put_SET_QUEUE(&ofpacts)->queue_id = ib->queue_id;
+ }
+ ofpact_put_OUTPUT(&ofpacts)->port = OFPP_NORMAL;
+
+ refresh_local(ib);
+ refresh_remotes(ib);
+
+ update_rules(ib);
+
+ HMAP_FOR_EACH_SAFE (rule, next, hmap_node, &ib->rules) {
+ switch (rule->op) {
+ case ADD:
+ ofproto_add_flow(ib->ofproto, &rule->match, rule->priority,
+ ofpacts.data, ofpacts.size);
+ break;
+
+ case DELETE:
+ if (ofproto_delete_flow(ib->ofproto,
+ &rule->match, rule->priority)) {
+ /* ofproto doesn't have the rule anymore so there's no reason
+ * for us to track it any longer. */
+ hmap_remove(&ib->rules, &rule->hmap_node);
+ free(rule);
+ }
+ break;
}
}
- /* Sort, to allow make_rules() to easily skip duplicates. */
- qsort(ib->remote_ips, ib->n_remote_ips, sizeof *ib->remote_ips,
- compare_ips);
- qsort(ib->remote_macs, ib->n_remote_macs, ETH_ADDR_LEN, compare_macs);
+ ofpbuf_uninit(&ofpacts);
- /* Add new rules. */
- add_rules(ib);
+ return ib->n_remotes || !hmap_is_empty(&ib->rules);
}
void
in_band_wait(struct in_band *in_band)
{
- time_t now = time_now();
- time_t wakeup
+ long long int wakeup
= MIN(in_band->next_remote_refresh, in_band->next_local_refresh);
- if (wakeup > now) {
- poll_timer_wait((wakeup - now) * 1000);
- } else {
- poll_immediate_wake();
- }
-}
-
-/* ofproto has flushed all flows from the flow table and it is calling us back
- * to allow us to reinstall the ones that are important to us. */
-void
-in_band_flushed(struct in_band *in_band)
-{
- add_rules(in_band);
+ poll_timer_wait_until(wakeup * 1000);
}
int
-in_band_create(struct ofproto *ofproto, struct dpif *dpif,
- struct switch_status *ss, struct in_band **in_bandp)
+in_band_create(struct ofproto *ofproto, const char *local_name,
+ struct in_band **in_bandp)
{
struct in_band *in_band;
- char local_name[IF_NAMESIZE];
struct netdev *local_netdev;
int error;
- error = dpif_port_get_name(dpif, ODPP_LOCAL,
- local_name, sizeof local_name);
- if (error) {
- VLOG_ERR("failed to initialize in-band control: cannot get name "
- "of datapath local port (%s)", strerror(error));
- return error;
- }
-
- error = netdev_open_default(local_name, &local_netdev);
+ *in_bandp = NULL;
+ error = netdev_open(local_name, "system", &local_netdev);
if (error) {
VLOG_ERR("failed to initialize in-band control: cannot open "
"datapath local port %s (%s)", local_name, strerror(error));
in_band = xzalloc(sizeof *in_band);
in_band->ofproto = ofproto;
- in_band->ss_cat = switch_status_register(ss, "in-band",
- in_band_status_cb, in_band);
+ in_band->queue_id = -1;
in_band->next_remote_refresh = TIME_MIN;
in_band->next_local_refresh = TIME_MIN;
in_band->local_netdev = local_netdev;
+ hmap_init(&in_band->rules);
*in_bandp = in_band;
in_band_destroy(struct in_band *ib)
{
if (ib) {
- drop_rules(ib);
+ struct in_band_rule *rule, *next;
+
+ HMAP_FOR_EACH_SAFE (rule, next, hmap_node, &ib->rules) {
+ hmap_remove(&ib->rules, &rule->hmap_node);
+ free(rule);
+ }
+ hmap_destroy(&ib->rules);
in_band_set_remotes(ib, NULL, 0);
- switch_status_unregister(ib->ss_cat);
netdev_close(ib->local_netdev);
free(ib);
}
}
-void
-in_band_set_remotes(struct in_band *ib, struct rconn **remotes, size_t n)
+static bool
+any_addresses_changed(struct in_band *ib,
+ const struct sockaddr_in *addresses, size_t n)
{
size_t i;
- /* Optimize the case where the rconns are the same as last time. */
- if (n == ib->n_remotes) {
- for (i = 0; i < n; i++) {
- if (ib->remotes[i].rconn != remotes[i]) {
- goto different;
- }
+ if (n != ib->n_remotes) {
+ return true;
+ }
+
+ for (i = 0; i < n; i++) {
+ const struct sockaddr_in *old = &ib->remotes[i].remote_addr;
+ const struct sockaddr_in *new = &addresses[i];
+
+ if (old->sin_addr.s_addr != new->sin_addr.s_addr ||
+ old->sin_port != new->sin_port) {
+ return true;
}
- return;
+ }
- different:;
+ return false;
+}
+
+void
+in_band_set_remotes(struct in_band *ib,
+ const struct sockaddr_in *addresses, size_t n)
+{
+ size_t i;
+
+ if (!any_addresses_changed(ib, addresses, n)) {
+ return;
}
+ /* Clear old remotes. */
for (i = 0; i < ib->n_remotes; i++) {
- /* We don't own the rconn. */
netdev_close(ib->remotes[i].remote_netdev);
}
free(ib->remotes);
- ib->next_remote_refresh = TIME_MIN;
- ib->remotes = n ? xzalloc(n * sizeof *ib->remotes) : 0;
+ /* Set up new remotes. */
+ ib->remotes = n ? xzalloc(n * sizeof *ib->remotes) : NULL;
ib->n_remotes = n;
for (i = 0; i < n; i++) {
- ib->remotes[i].rconn = remotes[i];
+ ib->remotes[i].remote_addr = addresses[i];
}
+
+ /* Force refresh in next call to in_band_run(). */
+ ib->next_remote_refresh = TIME_MIN;
}
+
+/* Sets the OpenFlow queue used by flows set up by 'ib' to 'queue_id'. If
+ * 'queue_id' is negative, 'ib' will not set any queue (which is also the
+ * default). */
+void
+in_band_set_queue(struct in_band *ib, int queue_id)
+{
+ ib->queue_id = queue_id;
+}
+