int backoff;
int max_backoff;
time_t backoff_deadline;
- time_t last_received;
time_t last_connected;
time_t last_disconnected;
unsigned int packets_sent;
time_t creation_time;
unsigned long int total_time_connected;
- /* Throughout this file, "probe" is shorthand for "inactivity probe".
- * When nothing has been received from the peer for a while, we send out
- * an echo request as an inactivity probe packet. We should receive back
- * a response. */
+ /* Throughout this file, "probe" is shorthand for "inactivity probe". When
+ * no activity has been observed from the peer for a while, we send out an
+ * echo request as an inactivity probe packet. We should receive back a
+ * response.
+ *
+ * "Activity" is defined as either receiving an OpenFlow message from the
+ * peer or successfully sending a message that had been in 'txq'. */
int probe_interval; /* Secs of inactivity before sending probe. */
+ time_t last_activity; /* Last time we saw some activity. */
/* When we create a vconn we obtain these values, to save them past the end
* of the vconn's lifetime. Otherwise, in-band control will only allow
#define MAX_MONITORS 8
struct vconn *monitors[8];
size_t n_monitors;
+
+ uint32_t allowed_versions;
};
static unsigned int elapsed_in_this_state(const struct rconn *);
* 8 seconds is used.
*
* The new rconn is initially unconnected. Use rconn_connect() or
- * rconn_connect_unreliably() to connect it. */
+ * rconn_connect_unreliably() to connect it.
+ *
+ * Connections made by the rconn will automatically negotiate an OpenFlow
+ * protocol version acceptable to both peers on the connection. The version
+ * negotiated will be one of those in the 'allowed_versions' bitmap:
+ * version 'x' is allowed if allowed_versions & (1 << x) is nonzero. If
+ * 'allowed_versions' is zero, then OFPUTIL_DEFAULT_VERSIONS are allowed.
+ **/
struct rconn *
-rconn_create(int probe_interval, int max_backoff, uint8_t dscp)
+rconn_create(int probe_interval, int max_backoff, uint8_t dscp,
+ uint32_t allowed_versions)
{
struct rconn *rc = xzalloc(sizeof *rc);
rc->backoff = 0;
rc->max_backoff = max_backoff ? max_backoff : 8;
rc->backoff_deadline = TIME_MIN;
- rc->last_received = time_now();
rc->last_connected = TIME_MIN;
rc->last_disconnected = TIME_MIN;
rc->seqno = 0;
rc->creation_time = time_now();
rc->total_time_connected = 0;
+ rc->last_activity = time_now();
+
rconn_set_probe_interval(rc, probe_interval);
rconn_set_dscp(rc, dscp);
rc->n_monitors = 0;
+ rc->allowed_versions = allowed_versions
+ ? allowed_versions
+ : OFPUTIL_DEFAULT_VERSIONS;
return rc;
}
VLOG_INFO("%s: connecting...", rc->name);
}
rc->n_attempted_connections++;
- retval = vconn_open(rc->target, OFP10_VERSION, &rc->vconn, rc->dscp);
+ retval = vconn_open(rc->target, rc->allowed_versions,
+ &rc->vconn, rc->dscp);
if (!retval) {
rc->remote_ip = vconn_get_remote_ip(rc->vconn);
rc->local_ip = vconn_get_local_ip(rc->vconn);
if (error) {
break;
}
+ rc->last_activity = time_now();
}
if (list_is_empty(&rc->txq)) {
poll_immediate_wake();
timeout_ACTIVE(const struct rconn *rc)
{
if (rc->probe_interval) {
- unsigned int base = MAX(rc->last_received, rc->state_entered);
+ unsigned int base = MAX(rc->last_activity, rc->state_entered);
unsigned int arg = base + rc->probe_interval - rc->state_entered;
return arg;
}
run_ACTIVE(struct rconn *rc)
{
if (timed_out(rc)) {
- unsigned int base = MAX(rc->last_received, rc->state_entered);
+ unsigned int base = MAX(rc->last_activity, rc->state_entered);
+ int version;
+
VLOG_DBG("%s: idle %u seconds, sending inactivity probe",
rc->name, (unsigned int) (time_now() - base));
+ version = rconn_get_version(rc);
+ assert(version >= 0 && version <= 0xff);
+
/* Ordering is important here: rconn_send() can transition to BACKOFF,
* and we don't want to transition back to IDLE if so, because then we
* can end up queuing a packet with vconn == NULL and then *boom*. */
state_transition(rc, S_IDLE);
- rconn_send(rc, make_echo_request(), NULL);
+ rconn_send(rc, make_echo_request(version), NULL);
return;
}
rc->probably_admitted = true;
rc->last_admitted = time_now();
}
- rc->last_received = time_now();
+ rc->last_activity = time_now();
rc->packets_received++;
if (rc->state == S_IDLE) {
state_transition(rc, S_ACTIVE);
return state_name(rc->state);
}
-/* Returns the number of connection attempts made by 'rc', including any
- * ongoing attempt that has not yet succeeded or failed. */
-unsigned int
-rconn_get_attempted_connections(const struct rconn *rc)
-{
- return rc->n_attempted_connections;
-}
-
-/* Returns the number of successful connection attempts made by 'rc'. */
-unsigned int
-rconn_get_successful_connections(const struct rconn *rc)
-{
- return rc->n_successful_connections;
-}
-
/* Returns the time at which the last successful connection was made by
* 'rc'. Returns TIME_MIN if never connected. */
time_t
return rc->last_disconnected;
}
-/* Returns the time at which the last OpenFlow message was received by 'rc'.
- * If no packets have been received on 'rc', returns the time at which 'rc'
- * was created. */
-time_t
-rconn_get_last_received(const struct rconn *rc)
-{
- return rc->last_received;
-}
-
-/* Returns the time at which 'rc' was created. */
-time_t
-rconn_get_creation_time(const struct rconn *rc)
-{
- return rc->creation_time;
-}
-
-/* Returns the approximate number of seconds that 'rc' has been connected. */
-unsigned long int
-rconn_get_total_time_connected(const struct rconn *rc)
-{
- return (rc->total_time_connected
- + (rconn_is_connected(rc) ? elapsed_in_this_state(rc) : 0));
-}
-
-/* Returns the current amount of backoff, in seconds. This is the amount of
- * time after which the rconn will transition from BACKOFF to CONNECTING. */
-int
-rconn_get_backoff(const struct rconn *rc)
-{
- return rc->backoff;
-}
-
-/* Returns the number of seconds spent in this state so far. */
-unsigned int
-rconn_get_state_elapsed(const struct rconn *rc)
-{
- return elapsed_in_this_state(rc);
-}
-
/* Returns 'rc''s current connection sequence number, a number that changes
* every time that 'rconn' connects or disconnects. */
unsigned int
projects / openvswitch / blobdiff