{0x01, 0x08, 0xc2, 0x00, 0x00, 0x00},
{0xff, 0xff, 0xff, 0xff, 0xff, 0xf0}},
+ { /* VRRP IPv4. */
+ {0x00, 0x00, 0x5e, 0x00, 0x01, 0x00},
+ {0xff, 0xff, 0xff, 0xff, 0xff, 0x00}},
+
+ { /* VRRP IPv6. */
+ {0x00, 0x00, 0x5e, 0x00, 0x02, 0x00},
+ {0xff, 0xff, 0xff, 0xff, 0xff, 0x00}},
+
+ { /* HSRPv1. */
+ {0x00, 0x00, 0x0c, 0x07, 0xac, 0x00},
+ {0xff, 0xff, 0xff, 0xff, 0xff, 0x00}},
+
+ { /* HSRPv2. */
+ {0x00, 0x00, 0x0c, 0x9f, 0xf0, 0x00},
+ {0xff, 0xff, 0xff, 0xff, 0xf0, 0x00}},
+
+ { /* GLBP. */
+ {0x00, 0x07, 0xb4, 0x00, 0x00, 0x00},
+ {0xff, 0xff, 0xff, 0x00, 0x00, 0x00}},
+
+ { /* Extreme Discovery Protocol. */
+ {0x00, 0xE0, 0x2B, 0x00, 0x00, 0x00},
+ {0xff, 0xff, 0xff, 0xff, 0xf0, 0x00}},
+
{ /* Cisco Inter Switch Link. */
{0x01, 0x00, 0x0c, 0x00, 0x00, 0x00},
{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}},
}
}
-/* Fills 'b' with an 802.2 SNAP packet with Ethernet source address 'eth_src',
- * the Nicira OUI as SNAP organization and 'snap_type' as SNAP type. The text
- * string in 'tag' is enclosed as the packet payload.
- *
+/* Fills 'b' with a Reverse ARP packet with Ethernet source address 'eth_src'.
* This function is used by Open vSwitch to compose packets in cases where
- * context is important but content doesn't (or shouldn't) matter. For this
- * purpose, 'snap_type' should be a random number and 'tag' should be an
- * English phrase that explains the purpose of the packet. (The English phrase
- * gives hapless admins running Wireshark the opportunity to figure out what's
- * going on.) */
+ * context is important but content doesn't (or shouldn't) matter.
+ *
+ * The returned packet has enough headroom to insert an 802.1Q VLAN header if
+ * desired. */
void
-compose_benign_packet(struct ofpbuf *b, const char *tag, uint16_t snap_type,
- const uint8_t eth_src[ETH_ADDR_LEN])
+compose_rarp(struct ofpbuf *b, const uint8_t eth_src[ETH_ADDR_LEN])
{
- size_t tag_size = strlen(tag) + 1;
- char *payload;
+ struct eth_header *eth;
+ struct rarp_header *rarp;
- payload = snap_compose(b, eth_addr_broadcast, eth_src, 0x002320, snap_type,
- tag_size + ETH_ADDR_LEN);
- memcpy(payload, tag, tag_size);
- memcpy(payload + tag_size, eth_src, ETH_ADDR_LEN);
+ ofpbuf_clear(b);
+ ofpbuf_prealloc_tailroom(b, ETH_HEADER_LEN + VLAN_HEADER_LEN
+ + RARP_HEADER_LEN);
+ ofpbuf_reserve(b, VLAN_HEADER_LEN);
+ eth = ofpbuf_put_uninit(b, sizeof *eth);
+ memcpy(eth->eth_dst, eth_addr_broadcast, ETH_ADDR_LEN);
+ memcpy(eth->eth_src, eth_src, ETH_ADDR_LEN);
+ eth->eth_type = htons(ETH_TYPE_RARP);
+
+ rarp = ofpbuf_put_uninit(b, sizeof *rarp);
+ rarp->hw_addr_space = htons(ARP_HTYPE_ETH);
+ rarp->proto_addr_space = htons(ETH_TYPE_IP);
+ rarp->hw_addr_length = ETH_ADDR_LEN;
+ rarp->proto_addr_length = sizeof rarp->src_proto_addr;
+ rarp->opcode = htons(RARP_REQUEST_REVERSE);
+ memcpy(rarp->src_hw_addr, eth_src, ETH_ADDR_LEN);
+ rarp->src_proto_addr = htonl(0);
+ memcpy(rarp->target_hw_addr, eth_src, ETH_ADDR_LEN);
+ rarp->target_proto_addr = htonl(0);
}
/* Insert VLAN header according to given TCI. Packet passed must be Ethernet
}
/* Given the IP netmask 'netmask', returns the number of bits of the IP address
- * that it specifies, that is, the number of 1-bits in 'netmask'. 'netmask'
- * must be a CIDR netmask (see ip_is_cidr()). */
+ * that it specifies, that is, the number of 1-bits in 'netmask'.
+ *
+ * If 'netmask' is not a CIDR netmask (see ip_is_cidr()), the return value will
+ * still be in the valid range but isn't otherwise meaningful. */
int
ip_count_cidr_bits(ovs_be32 netmask)
{
- assert(ip_is_cidr(netmask));
return 32 - ctz(ntohl(netmask));
}
/* Given the IPv6 netmask 'netmask', returns the number of bits of the IPv6
* address that it specifies, that is, the number of 1-bits in 'netmask'.
- * 'netmask' must be a CIDR netmask (see ipv6_is_cidr()). */
+ * 'netmask' must be a CIDR netmask (see ipv6_is_cidr()).
+ *
+ * If 'netmask' is not a CIDR netmask (see ipv6_is_cidr()), the return value
+ * will still be in the valid range but isn't otherwise meaningful. */
int
ipv6_count_cidr_bits(const struct in6_addr *netmask)
{
int count = 0;
const uint8_t *netmaskp = &netmask->s6_addr[0];
- assert(ipv6_is_cidr(netmask));
-
for (i=0; i<16; i++) {
if (netmaskp[i] == 0xff) {
count += 8;
return data;
}
-/* Populates 'b' with an Ethernet LLC+SNAP packet headed with the given
- * 'eth_dst', 'eth_src', 'snap_org', and 'snap_type'. A payload of 'size'
- * bytes is allocated in 'b' and returned. This payload may be populated with
- * appropriate information by the caller.
- *
- * The returned packet has enough headroom to insert an 802.1Q VLAN header if
- * desired. */
-void *
-snap_compose(struct ofpbuf *b, const uint8_t eth_dst[ETH_ADDR_LEN],
- const uint8_t eth_src[ETH_ADDR_LEN],
- unsigned int oui, uint16_t snap_type, size_t size)
-{
- struct eth_header *eth;
- struct llc_snap_header *llc_snap;
- void *payload;
-
- /* Compose basic packet structure. (We need the payload size to stick into
- * the 802.2 header.) */
- ofpbuf_clear(b);
- ofpbuf_prealloc_tailroom(b, ETH_HEADER_LEN + VLAN_HEADER_LEN
- + LLC_SNAP_HEADER_LEN + size);
- ofpbuf_reserve(b, VLAN_HEADER_LEN);
- eth = ofpbuf_put_zeros(b, ETH_HEADER_LEN);
- llc_snap = ofpbuf_put_zeros(b, LLC_SNAP_HEADER_LEN);
- payload = ofpbuf_put_uninit(b, size);
-
- /* Compose 802.2 header. */
- memcpy(eth->eth_dst, eth_dst, ETH_ADDR_LEN);
- memcpy(eth->eth_src, eth_src, ETH_ADDR_LEN);
- eth->eth_type = htons(b->size - ETH_HEADER_LEN);
-
- /* Compose LLC, SNAP headers. */
- llc_snap->llc.llc_dsap = LLC_DSAP_SNAP;
- llc_snap->llc.llc_ssap = LLC_SSAP_SNAP;
- llc_snap->llc.llc_cntl = LLC_CNTL_SNAP;
- llc_snap->snap.snap_org[0] = oui >> 16;
- llc_snap->snap.snap_org[1] = oui >> 8;
- llc_snap->snap.snap_org[2] = oui;
- llc_snap->snap.snap_type = htons(snap_type);
-
- return payload;
-}
-
static void
packet_set_ipv4_addr(struct ofpbuf *packet, ovs_be32 *addr, ovs_be32 new_addr)
{