#include "packets.h"
#include <assert.h>
#include <arpa/inet.h>
+#include <sys/socket.h>
#include <netinet/in.h>
#include <stdlib.h>
#include "byte-order.h"
memcpy(payload + tag_size, eth_src, ETH_ADDR_LEN);
}
-/* Modify the TCI field of 'packet', whose data must begin with an Ethernet
- * header. If a VLAN tag is present, its TCI field is replaced by 'tci'. If a
- * VLAN tag is not present, one is added with the TCI field set to 'tci'.
+/* Insert VLAN header according to given TCI. Packet passed must be Ethernet
+ * packet.
*
* Also sets 'packet->l2' to point to the new Ethernet header. */
void
-eth_set_vlan_tci(struct ofpbuf *packet, ovs_be16 tci)
+eth_push_vlan(struct ofpbuf *packet, ovs_be16 tci)
{
struct eth_header *eh = packet->data;
struct vlan_eth_header *veh;
- if (packet->size >= sizeof(struct vlan_eth_header)
- && eh->eth_type == htons(ETH_TYPE_VLAN)) {
- veh = packet->data;
- veh->veth_tci = tci;
- } else {
- /* Insert new 802.1Q header. */
- struct vlan_eth_header tmp;
- memcpy(tmp.veth_dst, eh->eth_dst, ETH_ADDR_LEN);
- memcpy(tmp.veth_src, eh->eth_src, ETH_ADDR_LEN);
- tmp.veth_type = htons(ETH_TYPE_VLAN);
- tmp.veth_tci = tci;
- tmp.veth_next_type = eh->eth_type;
-
- veh = ofpbuf_push_uninit(packet, VLAN_HEADER_LEN);
- memcpy(veh, &tmp, sizeof tmp);
- }
+ /* Insert new 802.1Q header. */
+ struct vlan_eth_header tmp;
+ memcpy(tmp.veth_dst, eh->eth_dst, ETH_ADDR_LEN);
+ memcpy(tmp.veth_src, eh->eth_src, ETH_ADDR_LEN);
+ tmp.veth_type = htons(ETH_TYPE_VLAN);
+ tmp.veth_tci = tci;
+ tmp.veth_next_type = eh->eth_type;
+
+ veh = ofpbuf_push_uninit(packet, VLAN_HEADER_LEN);
+ memcpy(veh, &tmp, sizeof tmp);
+
packet->l2 = packet->data;
}
+/* Given the IP netmask 'netmask', returns the number of bits of the IP address
+ * that it specifies, that is, the number of 1-bits in 'netmask'. 'netmask'
+ * must be a CIDR netmask (see ip_is_cidr()). */
+int
+ip_count_cidr_bits(ovs_be32 netmask)
+{
+ assert(ip_is_cidr(netmask));
+ return 32 - ctz(ntohl(netmask));
+}
+
+void
+ip_format_masked(ovs_be32 ip, ovs_be32 mask, struct ds *s)
+{
+ ds_put_format(s, IP_FMT, IP_ARGS(&ip));
+ if (mask != htonl(UINT32_MAX)) {
+ if (ip_is_cidr(mask)) {
+ ds_put_format(s, "/%d", ip_count_cidr_bits(mask));
+ } else {
+ ds_put_format(s, "/"IP_FMT, IP_ARGS(&mask));
+ }
+ }
+}
+
+
/* Stores the string representation of the IPv6 address 'addr' into the
* character array 'addr_str', which must be at least INET6_ADDRSTRLEN
* bytes long. */
void
print_ipv6_addr(struct ds *string, const struct in6_addr *addr)
{
- char addr_str[INET6_ADDRSTRLEN];
+ char *dst;
+
+ ds_reserve(string, string->length + INET6_ADDRSTRLEN);
- format_ipv6_addr(addr_str, addr);
- ds_put_format(string, "%s", addr_str);
+ dst = string->string + string->length;
+ format_ipv6_addr(dst, addr);
+ string->length += strlen(dst);
+}
+
+void
+print_ipv6_masked(struct ds *s, const struct in6_addr *addr,
+ const struct in6_addr *mask)
+{
+ print_ipv6_addr(s, addr);
+ if (mask && !ipv6_mask_is_exact(mask)) {
+ if (ipv6_is_cidr(mask)) {
+ int cidr_bits = ipv6_count_cidr_bits(mask);
+ ds_put_format(s, "/%d", cidr_bits);
+ } else {
+ ds_put_char(s, '/');
+ print_ipv6_addr(s, mask);
+ }
+ }
}
struct in6_addr ipv6_addr_bitand(const struct in6_addr *a,
return netmask;
}
-/* Given the IPv6 netmask 'netmask', returns the number of bits of the
- * IPv6 address that it wildcards. 'netmask' must be a CIDR netmask (see
- * ipv6_is_cidr()). */
+/* Given the IPv6 netmask 'netmask', returns the number of bits of the IPv6
+ * address that it specifies, that is, the number of 1-bits in 'netmask'.
+ * 'netmask' must be a CIDR netmask (see ipv6_is_cidr()). */
int
ipv6_count_cidr_bits(const struct in6_addr *netmask)
{
/* Populates 'b' with an Ethernet II packet headed with the given 'eth_dst',
* 'eth_src' and 'eth_type' parameters. A payload of 'size' bytes is allocated
* in 'b' and returned. This payload may be populated with appropriate
- * information by the caller.
+ * information by the caller. Sets 'b''s 'l2' and 'l3' pointers to the
+ * Ethernet header and payload respectively.
*
* The returned packet has enough headroom to insert an 802.1Q VLAN header if
* desired. */
memcpy(eth->eth_src, eth_src, ETH_ADDR_LEN);
eth->eth_type = htons(eth_type);
+ b->l2 = eth;
+ b->l3 = data;
+
return data;
}
return payload;
}
-
-/* Populates 'pdu' with a LACP PDU comprised of 'actor' and 'partner'. */
-void
-compose_lacp_pdu(const struct lacp_info *actor,
- const struct lacp_info *partner, struct lacp_pdu *pdu)
-{
- memset(pdu, 0, sizeof *pdu);
-
- pdu->subtype = 1;
- pdu->version = 1;
-
- pdu->actor_type = 1;
- pdu->actor_len = 20;
- pdu->actor = *actor;
-
- pdu->partner_type = 2;
- pdu->partner_len = 20;
- pdu->partner = *partner;
-
- pdu->collector_type = 3;
- pdu->collector_len = 16;
- pdu->collector_delay = htons(0);
-}
-
-/* Parses 'b' which represents a packet containing a LACP PDU. This function
- * returns NULL if 'b' is malformed, or does not represent a LACP PDU format
- * supported by OVS. Otherwise, it returns a pointer to the lacp_pdu contained
- * within 'b'. */
-const struct lacp_pdu *
-parse_lacp_packet(const struct ofpbuf *b)
-{
- const struct lacp_pdu *pdu;
-
- pdu = ofpbuf_at(b, (uint8_t *)b->l3 - (uint8_t *)b->data, LACP_PDU_LEN);
-
- if (pdu && pdu->subtype == 1
- && pdu->actor_type == 1 && pdu->actor_len == 20
- && pdu->partner_type == 2 && pdu->partner_len == 20) {
- return pdu;
- } else {
- return NULL;
- }
-}
projects / openvswitch / blobdiff