{
MFF_IPV6_LABEL, "ipv6_label", NULL,
4, 20,
- MFM_NONE, FWW_IPV6_LABEL,
+ MFM_FULLY, 0,
MFS_HEXADECIMAL,
MFP_IPV6,
false,
case MFF_IP_DSCP:
case MFF_IP_ECN:
case MFF_IP_TTL:
- case MFF_IPV6_LABEL:
case MFF_ARP_OP:
case MFF_ARP_SHA:
case MFF_ARP_THA:
case MFF_IPV6_DST:
return ipv6_mask_is_any(&wc->ipv6_dst_mask);
+ case MFF_IPV6_LABEL:
+ return !wc->ipv6_label_mask;
+
case MFF_ND_TARGET:
return ipv6_mask_is_any(&wc->nd_target_mask);
break;
case MFF_TCP_SRC:
- value->be16 = flow->tp_src;
- break;
-
- case MFF_TCP_DST:
- value->be16 = flow->tp_dst;
- break;
-
case MFF_UDP_SRC:
value->be16 = flow->tp_src;
break;
+ case MFF_TCP_DST:
case MFF_UDP_DST:
value->be16 = flow->tp_dst;
break;
break;
case MFF_TCP_SRC:
- cls_rule_set_tp_src(rule, value->be16);
- break;
-
- case MFF_TCP_DST:
- cls_rule_set_tp_dst(rule, value->be16);
- break;
-
case MFF_UDP_SRC:
cls_rule_set_tp_src(rule, value->be16);
break;
+ case MFF_TCP_DST:
case MFF_UDP_DST:
cls_rule_set_tp_dst(rule, value->be16);
break;
break;
case MFF_IPV6_LABEL:
- rule->wc.wildcards |= FWW_IPV6_LABEL;
+ rule->wc.ipv6_label_mask = 0;
rule->flow.ipv6_label = 0;
break;
case MFF_ETH_TYPE:
case MFF_VLAN_VID:
case MFF_VLAN_PCP:
- case MFF_IPV6_LABEL:
case MFF_IP_PROTO:
case MFF_IP_TTL:
case MFF_IP_DSCP:
cls_rule_set_ipv6_dst_masked(rule, &value->ipv6, &mask->ipv6);
break;
+ case MFF_IPV6_LABEL:
+ if ((mask->be32 & htonl(IPV6_LABEL_MASK)) == htonl(IPV6_LABEL_MASK)) {
+ mf_set_value(mf, value, rule);
+ } else {
+ cls_rule_set_ipv6_label_masked(rule, value->be32, mask->be32);
+ }
+ break;
+
case MFF_ND_TARGET:
cls_rule_set_nd_target_masked(rule, &value->ipv6, &mask->ipv6);
break;
\f
/* Makes subfield 'sf' within 'rule' exactly match the 'sf->n_bits'
* least-significant bits in 'x'.
- *
- * See mf_set_subfield() for an example.
- *
- * The difference between this function and mf_set_subfield() is that the
- * latter function can only handle subfields up to 64 bits wide, whereas this
- * one handles the general case. On the other hand, mf_set_subfield() is
- * arguably easier to use. */
+ */
void
mf_write_subfield(const struct mf_subfield *sf, const union mf_subvalue *x,
struct cls_rule *rule)
mf_set(field, &value, &mask, rule);
}
-/* Makes subfield 'sf' within 'rule' exactly match the 'sf->n_bits'
- * least-significant bits of 'x'.
- *
- * Example: suppose that 'sf->field' is originally the following 2-byte field
- * in 'rule':
- *
- * value == 0xe00a == 2#1110000000001010
- * mask == 0xfc3f == 2#1111110000111111
- *
- * The call mf_set_subfield(sf, 0x55, 8, 7, rule), where sf->ofs == 8 and
- * sf->n_bits == 7 would have the following effect (note that 0x55 is
- * 2#1010101):
- *
- * value == 0xd50a == 2#1101010100001010
- * mask == 0xff3f == 2#1111111100111111
- * ^^^^^^^ affected bits
- *
- * The caller is responsible for ensuring that the result will be a valid
- * wildcard pattern for 'sf->field'. The caller is responsible for ensuring
- * that 'rule' meets 'sf->field''s prerequisites. */
-void
-mf_set_subfield(const struct mf_subfield *sf, uint64_t x,
- struct cls_rule *rule)
-{
- const struct mf_field *field = sf->field;
- unsigned int n_bits = sf->n_bits;
- unsigned int ofs = sf->ofs;
-
- if (ofs == 0 && field->n_bytes * 8 == n_bits) {
- union mf_value value;
- int i;
-
- for (i = field->n_bytes - 1; i >= 0; i--) {
- ((uint8_t *) &value)[i] = x;
- x >>= 8;
- }
- mf_set_value(field, &value, rule);
- } else {
- union mf_value value, mask;
- uint8_t *vp = (uint8_t *) &value;
- uint8_t *mp = (uint8_t *) &mask;
-
- mf_get(field, rule, &value, &mask);
- bitwise_put(x, vp, field->n_bytes, ofs, n_bits);
- bitwise_put(UINT64_MAX, mp, field->n_bytes, ofs, n_bits);
- mf_set(field, &value, &mask, rule);
- }
-}
-
-/* Similar to mf_set_subfield() but modifies only a flow, not a cls_rule. */
-void
-mf_set_subfield_value(const struct mf_subfield *sf, uint64_t x,
- struct flow *flow)
-{
- const struct mf_field *field = sf->field;
- unsigned int n_bits = sf->n_bits;
- unsigned int ofs = sf->ofs;
- union mf_value value;
-
- if (ofs == 0 && field->n_bytes * 8 == n_bits) {
- int i;
-
- for (i = field->n_bytes - 1; i >= 0; i--) {
- ((uint8_t *) &value)[i] = x;
- x >>= 8;
- }
- mf_set_flow_value(field, &value, flow);
- } else {
- mf_get_value(field, flow, &value);
- bitwise_put(x, &value, field->n_bytes, ofs, n_bits);
- mf_set_flow_value(field, &value, flow);
- }
-}
-
/* Initializes 'x' to the value of 'sf' within 'flow'. 'sf' must be valid for
* reading 'flow', e.g. as checked by mf_check_src(). */
void
projects / openvswitch / blobdiff