Don't overload IP TOS with the frag matching bits.
[openvswitch] / lib / flow.h
index c451073712e51fd52d234cb0da03a78664dbc1ea..af634fb966054f75f00611ba41707e28eaa4f448 100644 (file)
@@ -35,7 +35,7 @@ struct ofpbuf;
 /* This sequence number should be incremented whenever anything involving flows
  * or the wildcarding of flows changes.  This will cause build assertion
  * failures in places which likely need to be updated. */
-#define FLOW_WC_SEQ 4
+#define FLOW_WC_SEQ 5
 
 #define FLOW_N_REGS 5
 BUILD_ASSERT_DECL(FLOW_N_REGS <= NXM_NX_MAX_REGS);
@@ -70,21 +70,23 @@ struct flow {
     uint8_t dl_src[6];          /* Ethernet source address. */
     uint8_t dl_dst[6];          /* Ethernet destination address. */
     uint8_t nw_proto;           /* IP protocol or low 8 bits of ARP opcode. */
-    uint8_t tos_frag;           /* IP ToS in top bits, FLOW_FRAG_* in low. */
+    uint8_t tos;                /* IP ToS. */
     uint8_t arp_sha[6];         /* ARP/ND source hardware address. */
     uint8_t arp_tha[6];         /* ARP/ND target hardware address. */
+    uint8_t frag;               /* FLOW_FRAG_* flags. */
+    uint8_t reserved[7];        /* Reserved for 64-bit packing. */
 };
 
 /* Assert that there are FLOW_SIG_SIZE bytes of significant data in "struct
  * flow", followed by FLOW_PAD_SIZE bytes of padding. */
-#define FLOW_SIG_SIZE (108 + FLOW_N_REGS * 4)
-#define FLOW_PAD_SIZE 0
-BUILD_ASSERT_DECL(offsetof(struct flow, arp_tha) == FLOW_SIG_SIZE - 6);
-BUILD_ASSERT_DECL(sizeof(((struct flow *)0)->arp_tha) == 6);
+#define FLOW_SIG_SIZE (109 + FLOW_N_REGS * 4)
+#define FLOW_PAD_SIZE 7
+BUILD_ASSERT_DECL(offsetof(struct flow, frag) == FLOW_SIG_SIZE - 1);
+BUILD_ASSERT_DECL(sizeof(((struct flow *)0)->frag) == 1);
 BUILD_ASSERT_DECL(sizeof(struct flow) == FLOW_SIG_SIZE + FLOW_PAD_SIZE);
 
 /* Remember to update FLOW_WC_SEQ when changing 'struct flow'. */
-BUILD_ASSERT_DECL(FLOW_SIG_SIZE == 128 && FLOW_WC_SEQ == 4);
+BUILD_ASSERT_DECL(FLOW_SIG_SIZE == 129 && FLOW_WC_SEQ == 5);
 
 void flow_extract(struct ofpbuf *, uint32_t priority, ovs_be64 tun_id,
                   uint16_t in_port, struct flow *);
@@ -144,7 +146,7 @@ typedef unsigned int OVS_BITWISE flow_wildcards_t;
 #define FWW_ALL         ((OVS_FORCE flow_wildcards_t) (((1 << 12)) - 1))
 
 /* Remember to update FLOW_WC_SEQ when adding or removing FWW_*. */
-BUILD_ASSERT_DECL(FWW_ALL == ((1 << 12) - 1) && FLOW_WC_SEQ == 4);
+BUILD_ASSERT_DECL(FWW_ALL == ((1 << 12) - 1) && FLOW_WC_SEQ == 5);
 
 /* Information on wildcards for a flow, as a supplement to "struct flow".
  *
@@ -159,12 +161,13 @@ struct flow_wildcards {
     struct in6_addr ipv6_src_mask; /* 1-bit in each signficant ipv6_src bit. */
     struct in6_addr ipv6_dst_mask; /* 1-bit in each signficant ipv6_dst bit. */
     ovs_be16 vlan_tci_mask;     /* 1-bit in each significant vlan_tci bit. */
-    uint8_t tos_frag_mask;      /* 1-bit in each significant tos_frag bit. */
-    uint8_t zeros[5];           /* Padding field set to zero. */
+    uint8_t tos_mask;           /* 1-bit in each significant tos bit. */
+    uint8_t frag_mask;          /* 1-bit in each significant frag bit. */
+    uint8_t zeros[4];           /* Padding field set to zero. */
 };
 
 /* Remember to update FLOW_WC_SEQ when updating struct flow_wildcards. */
-BUILD_ASSERT_DECL(sizeof(struct flow_wildcards) == 80 && FLOW_WC_SEQ == 4);
+BUILD_ASSERT_DECL(sizeof(struct flow_wildcards) == 80 && FLOW_WC_SEQ == 5);
 
 void flow_wildcards_init_catchall(struct flow_wildcards *);
 void flow_wildcards_init_exact(struct flow_wildcards *);