/*
- * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira Networks
+ * Copyright (c) 2008, 2009, 2010, 2011, 2012 Nicira, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
#include "openflow/openflow.h"
#include "openvswitch/types.h"
-/* The following vendor extensions, proposed by Nicira Networks, are not yet
+/* The following vendor extensions, proposed by Nicira, are not yet
* standardized, so they are not included in openflow.h. Some of them may be
* suitable for standardization; others we never expect to standardize. */
struct nicira_header {
struct ofp_header header;
ovs_be32 vendor; /* NX_VENDOR_ID. */
- ovs_be32 subtype; /* One of NXT_* below. */
+ ovs_be32 subtype; /* See the NXT numbers in ofp-msgs.h. */
};
OFP_ASSERT(sizeof(struct nicira_header) == 16);
-/* Values for the 'subtype' member of struct nicira_header. */
-enum nicira_type {
- /* No longer used. */
- NXT_STATUS_REQUEST__OBSOLETE = 0,
- NXT_STATUS_REPLY__OBSOLETE = 1,
- NXT_ACT_SET_CONFIG__OBSOLETE = 2,
- NXT_ACT_GET_CONFIG__OBSOLETE = 3,
- NXT_COMMAND_REQUEST__OBSOLETE = 4,
- NXT_COMMAND_REPLY__OBSOLETE = 5,
- NXT_FLOW_END_CONFIG__OBSOLETE = 6,
- NXT_FLOW_END__OBSOLETE = 7,
- NXT_MGMT__OBSOLETE = 8,
- NXT_TUN_ID_FROM_COOKIE__OBSOLETE = 9,
-
- /* Controller role support. The request body is struct nx_role_request.
- * The reply echos the request. */
- NXT_ROLE_REQUEST = 10,
- NXT_ROLE_REPLY = 11,
-
- /* Flexible flow specification (aka NXM = Nicira Extended Match). */
- NXT_SET_FLOW_FORMAT = 12, /* Set flow format. */
- NXT_FLOW_MOD = 13, /* Analogous to OFPT_FLOW_MOD. */
- NXT_FLOW_REMOVED = 14, /* Analogous to OFPT_FLOW_REMOVED. */
-
- /* Use the upper 8 bits of the 'command' member in struct ofp_flow_mod to
- * designate the table to which a flow is to be added? See the big comment
- * on struct nx_flow_mod_table_id for more information. */
- NXT_FLOW_MOD_TABLE_ID = 15,
-
- /* Alternative PACKET_IN message formats. */
- NXT_SET_PACKET_IN_FORMAT = 16, /* Set Packet In format. */
- NXT_PACKET_IN = 17, /* Nicira Packet In. */
-
- /* Are the idle_age and hard_age members in struct nx_flow_stats supported?
- * If so, the switch does not reply to this message (which consists only of
- * a "struct nicira_header"). If not, the switch sends an error reply. */
- NXT_FLOW_AGE = 18,
-
- NXT_SET_ASYNC_CONFIG = 19, /* struct nx_async_config. */
- NXT_SET_CONTROLLER_ID = 20, /* struct nx_controller_id. */
-};
-
-/* Header for Nicira vendor stats request and reply messages. */
-struct nicira_stats_msg {
- struct ofp_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
+/* Header for Nicira vendor stats request and reply messages in OpenFlow
+ * 1.0. */
+struct nicira10_stats_msg {
+ struct ofp10_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
ovs_be32 subtype; /* One of NXST_* below. */
uint8_t pad[4]; /* Align to 64-bits. */
};
-OFP_ASSERT(sizeof(struct nicira_stats_msg) == 24);
+OFP_ASSERT(sizeof(struct nicira10_stats_msg) == 24);
-/* Values for the 'subtype' member of struct nicira_stats_msg. */
-enum nicira_stats_type {
- /* Flexible flow specification (aka NXM = Nicira Extended Match). */
- NXST_FLOW, /* Analogous to OFPST_FLOW. */
- NXST_AGGREGATE /* Analogous to OFPST_AGGREGATE. */
+/* Header for Nicira vendor stats request and reply messages in OpenFlow
+ * 1.1. */
+struct nicira11_stats_msg {
+ struct ofp11_vendor_stats_msg vsm; /* Vendor NX_VENDOR_ID. */
+ ovs_be32 subtype; /* One of NXST_* below. */
};
+OFP_ASSERT(sizeof(struct nicira11_stats_msg) == 24);
/* Fields to use when hashing flows. */
enum nx_hash_fields {
* table match, then none is modified or deleted.
*/
struct nx_flow_mod_table_id {
- struct ofp_header header;
- ovs_be32 vendor; /* NX_VENDOR_ID. */
- ovs_be32 subtype; /* NXT_FLOW_MOD_TABLE_ID. */
uint8_t set; /* Nonzero to enable, zero to disable. */
uint8_t pad[7];
};
-OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 24);
+OFP_ASSERT(sizeof(struct nx_flow_mod_table_id) == 8);
enum nx_packet_in_format {
NXPIF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */
/* NXT_SET_PACKET_IN_FORMAT request. */
struct nx_set_packet_in_format {
- struct nicira_header nxh;
ovs_be32 format; /* One of NXPIF_*. */
};
-OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 20);
+OFP_ASSERT(sizeof(struct nx_set_packet_in_format) == 4);
/* NXT_PACKET_IN (analogous to OFPT_PACKET_IN).
*
* The 'cookie' and 'table_id' fields have no meaning when 'reason' is
* OFPR_NO_MATCH. In this case they should be set to 0. */
struct nx_packet_in {
- struct nicira_header nxh;
ovs_be32 buffer_id; /* ID assigned by datapath. */
ovs_be16 total_len; /* Full length of frame. */
uint8_t reason; /* Reason packet is sent (one of OFPR_*). */
/* uint8_t pad[2]; */ /* Align to 64 bit + 16 bit. */
/* uint8_t data[0]; */ /* Ethernet frame. */
};
-OFP_ASSERT(sizeof(struct nx_packet_in) == 40);
+OFP_ASSERT(sizeof(struct nx_packet_in) == 24);
/* Configures the "role" of the sending controller. The default role is:
*
* messages, but they do receive OFPT_PORT_STATUS messages.
*/
struct nx_role_request {
- struct nicira_header nxh;
ovs_be32 role; /* One of NX_ROLE_*. */
};
-OFP_ASSERT(sizeof(struct nx_role_request) == 20);
+OFP_ASSERT(sizeof(struct nx_role_request) == 4);
enum nx_role {
NX_ROLE_OTHER, /* Default role, full access. */
* with value 1<<2 == 4 in port_status_mask[1] determines whether the
* controller will receive OFPT_PORT_STATUS messages with reason OFPPR_MODIFY
* (value 2) when the controller has a "slave" role.
+ *
+ * As a side effect, for service controllers, this message changes the
+ * miss_send_len from default of zero to OFP_DEFAULT_MISS_SEND_LEN (128).
*/
struct nx_async_config {
- struct nicira_header nxh;
ovs_be32 packet_in_mask[2]; /* Bitmasks of OFPR_* values. */
ovs_be32 port_status_mask[2]; /* Bitmasks of OFPRR_* values. */
ovs_be32 flow_removed_mask[2]; /* Bitmasks of OFPPR_* values. */
};
-OFP_ASSERT(sizeof(struct nx_async_config) == 40);
+OFP_ASSERT(sizeof(struct nx_async_config) == 24);
\f
/* Nicira vendor flow actions. */
* Sets the encapsulating tunnel ID to a 64-bit value. */
struct nx_action_set_tunnel64 {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_SET_TUNNEL64. */
uint8_t pad[6];
*/
struct nx_action_reg_move {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_REG_MOVE. */
ovs_be16 n_bits; /* Number of bits. */
*/
struct nx_action_reg_load {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 16. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_REG_LOAD. */
ovs_be16 ofs_nbits; /* (ofs << 6) | (n_bits - 1). */
*/
struct nx_action_autopath {
ovs_be16 type; /* OFPAT_VENDOR. */
- ovs_be16 len; /* Length is 20. */
+ ovs_be16 len; /* Length is 24. */
ovs_be32 vendor; /* NX_VENDOR_ID. */
ovs_be16 subtype; /* NXAST_AUTOPATH. */
\f
/* Flexible flow specifications (aka NXM = Nicira Extended Match).
*
- * OpenFlow 1.0 has "struct ofp_match" for specifying flow matches. This
+ * OpenFlow 1.0 has "struct ofp10_match" for specifying flow matches. This
* structure is fixed-length and hence difficult to extend. This section
* describes a more flexible, variable-length flow match, called "nx_match" for
* short, that is also supported by Open vSwitch. This section also defines a
- * replacement for each OpenFlow message that includes struct ofp_match.
+ * replacement for each OpenFlow message that includes struct ofp10_match.
*
*
* Format
* matches bit J in nxm_value. A 0-bit in nxm_mask causes the
* corresponding bits in nxm_value and the field's value to be ignored.
* (The sense of the nxm_mask bits is the opposite of that used by the
- * "wildcards" member of struct ofp_match.)
+ * "wildcards" member of struct ofp10_match.)
*
* When nxm_hasmask is 1, nxm_length is always even.
*
*
* Format: 48-bit Ethernet MAC address.
*
- * Masking: The nxm_mask patterns 01:00:00:00:00:00 and FE:FF:FF:FF:FF:FF must
- * be supported for NXM_OF_ETH_DST_W (as well as the trivial patterns that
- * are all-0-bits or all-1-bits). Support for other patterns and for masking
- * of NXM_OF_ETH_SRC is optional. */
+ * Masking: Fully maskable, in versions 1.8 and later. Earlier versions only
+ * supported the following masks for NXM_OF_ETH_DST_W: 00:00:00:00:00:00,
+ * fe:ff:ff:ff:ff:ff, 01:00:00:00:00:00, ff:ff:ff:ff:ff:ff. */
#define NXM_OF_ETH_DST NXM_HEADER (0x0000, 1, 6)
#define NXM_OF_ETH_DST_W NXM_HEADER_W(0x0000, 1, 6)
#define NXM_OF_ETH_SRC NXM_HEADER (0x0000, 2, 6)
+#define NXM_OF_ETH_SRC_W NXM_HEADER_W(0x0000, 2, 6)
/* Packet's Ethernet type.
*
*
* Format: 32-bit integer in network byte order.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 32-N bits set to 0. */
#define NXM_OF_IP_SRC NXM_HEADER (0x0000, 7, 4)
#define NXM_OF_IP_SRC_W NXM_HEADER_W(0x0000, 7, 4)
*
* Format: 32-bit integer in network byte order.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In earlier
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 32-N bits set to 0. */
#define NXM_OF_ARP_SPA NXM_HEADER (0x0000, 16, 4)
#define NXM_OF_ARP_SPA_W NXM_HEADER_W(0x0000, 16, 4)
*
* Format: 128-bit IPv6 address.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 128-N bits set to 0. */
#define NXM_NX_IPV6_SRC NXM_HEADER (0x0001, 19, 16)
#define NXM_NX_IPV6_SRC_W NXM_HEADER_W(0x0001, 19, 16)
*
* Format: 128-bit IPv6 address.
*
- * Masking: Only CIDR masks are allowed, that is, masks that consist of N
+ * Masking: Fully maskable, in Open vSwitch 1.8 and later. In previous
+ * versions, only CIDR masks are allowed, that is, masks that consist of N
* high-order bits set to 1 and the other 128-N bits set to 0. */
#define NXM_NX_ND_TARGET NXM_HEADER (0x0001, 23, 16)
#define NXM_NX_ND_TARGET_W NXM_HEADER_W (0x0001, 23, 16)
enum nx_flow_format {
NXFF_OPENFLOW10 = 0, /* Standard OpenFlow 1.0 compatible. */
- NXFF_NXM = 2 /* Nicira extended match. */
+ NXFF_NXM = 2, /* Nicira extended match. */
+ NXFF_OPENFLOW12 = 3 /* OpenFlow 1.2 format. */
};
/* NXT_SET_FLOW_FORMAT request. */
struct nx_set_flow_format {
- struct nicira_header nxh;
ovs_be32 format; /* One of NXFF_*. */
};
-OFP_ASSERT(sizeof(struct nx_set_flow_format) == 20);
+OFP_ASSERT(sizeof(struct nx_set_flow_format) == 4);
/* NXT_FLOW_MOD (analogous to OFPT_FLOW_MOD).
*
* It is possible to limit flow deletions and modifications to certain
- * cookies by using the NXM_NX_COOKIE and NXM_NX_COOKIE_W matches. For
- * these commands, the "cookie" field is always ignored. Flow additions
- * make use of the "cookie" field and ignore any NXM_NX_COOKIE*
- * definitions.
+ * cookies by using the NXM_NX_COOKIE(_W) matches. The "cookie" field
+ * is used only to add or modify flow cookies.
*/
struct nx_flow_mod {
- struct nicira_header nxh;
ovs_be64 cookie; /* Opaque controller-issued identifier. */
ovs_be16 command; /* One of OFPFC_*. */
ovs_be16 idle_timeout; /* Idle time before discarding (seconds). */
* multiple of 8).
*/
};
-OFP_ASSERT(sizeof(struct nx_flow_mod) == 48);
+OFP_ASSERT(sizeof(struct nx_flow_mod) == 32);
/* NXT_FLOW_REMOVED (analogous to OFPT_FLOW_REMOVED). */
struct nx_flow_removed {
- struct nicira_header nxh;
ovs_be64 cookie; /* Opaque controller-issued identifier. */
ovs_be16 priority; /* Priority level of flow entry. */
uint8_t reason; /* One of OFPRR_*. */
* - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
* all-zero bytes. */
};
-OFP_ASSERT(sizeof(struct nx_flow_removed) == 56);
+OFP_ASSERT(sizeof(struct nx_flow_removed) == 40);
/* Nicira vendor stats request of type NXST_FLOW (analogous to OFPST_FLOW
* request).
* NXM_NX_COOKIE and NXM_NX_COOKIE_W matches.
*/
struct nx_flow_stats_request {
- struct nicira_stats_msg nsm;
ovs_be16 out_port; /* Require matching entries to include this
as an output port. A value of OFPP_NONE
indicates no restriction. */
* message.
*/
};
-OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 32);
+OFP_ASSERT(sizeof(struct nx_flow_stats_request) == 8);
/* Body for Nicira vendor stats reply of type NXST_FLOW (analogous to
* OFPST_FLOW reply).
ovs_be32 duration_sec; /* Time flow has been alive in seconds. */
ovs_be32 duration_nsec; /* Time flow has been alive in nanoseconds
beyond duration_sec. */
- ovs_be16 priority; /* Priority of the entry. Only meaningful
- when this is not an exact-match entry. */
+ ovs_be16 priority; /* Priority of the entry. */
ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */
ovs_be16 hard_timeout; /* Number of seconds before expiration. */
ovs_be16 match_len; /* Length of nx_match. */
/* Nicira vendor stats request of type NXST_AGGREGATE (analogous to
* OFPST_AGGREGATE request). */
struct nx_aggregate_stats_request {
- struct nicira_stats_msg nsm;
ovs_be16 out_port; /* Require matching entries to include this
as an output port. A value of OFPP_NONE
indicates no restriction. */
* message.
*/
};
-OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 32);
+OFP_ASSERT(sizeof(struct nx_aggregate_stats_request) == 8);
/* Body for nicira_stats_msg reply of type NXST_AGGREGATE (analogous to
* OFPST_AGGREGATE reply). */
struct nx_aggregate_stats_reply {
- struct nicira_stats_msg nsm;
ovs_be64 packet_count; /* Number of packets, UINT64_MAX if unknown. */
ovs_be64 byte_count; /* Number of bytes, UINT64_MAX if unknown. */
ovs_be32 flow_count; /* Number of flows. */
uint8_t pad[4]; /* Align to 64 bits. */
};
-OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 48);
+OFP_ASSERT(sizeof(struct nx_aggregate_stats_reply) == 24);
\f
/* NXT_SET_CONTROLLER_ID.
*
* The NXAST_CONTROLLER action is the only current user of controller
* connection IDs. */
struct nx_controller_id {
- struct nicira_header nxh;
uint8_t zero[6]; /* Must be zero. */
ovs_be16 controller_id; /* New controller connection ID. */
};
-OFP_ASSERT(sizeof(struct nx_controller_id) == 24);
+OFP_ASSERT(sizeof(struct nx_controller_id) == 8);
/* Action structure for NXAST_CONTROLLER.
*
uint8_t zero; /* Must be zero. */
};
OFP_ASSERT(sizeof(struct nx_action_controller) == 16);
+\f
+/* Flow Table Monitoring
+ * =====================
+ *
+ * NXST_FLOW_MONITOR allows a controller to keep track of changes to OpenFlow
+ * flow table(s) or subsets of them, with the following workflow:
+ *
+ * 1. The controller sends an NXST_FLOW_MONITOR request to begin monitoring
+ * flows. The 'id' in the request must be unique among all monitors that
+ * the controller has started and not yet canceled on this OpenFlow
+ * connection.
+ *
+ * 2. The switch responds with an NXST_FLOW_MONITOR reply. If the request's
+ * 'flags' included NXFMF_INITIAL, the reply includes all the flows that
+ * matched the request at the time of the request (with event NXFME_ADDED).
+ * If 'flags' did not include NXFMF_INITIAL, the reply is empty.
+ *
+ * The reply uses the xid of the request (as do all replies to OpenFlow
+ * requests).
+ *
+ * 3. Whenever a change to a flow table entry matches some outstanding monitor
+ * request's criteria and flags, the switch sends a notification to the
+ * controller as an additional NXST_FLOW_MONITOR reply with xid 0.
+ *
+ * When multiple outstanding monitors match a single change, only a single
+ * notification is sent. This merged notification includes the information
+ * requested in any of the individual monitors. That is, if any of the
+ * matching monitors requests actions (NXFMF_ACTIONS), the notification
+ * includes actions, and if any of the monitors request full changes for the
+ * controller's own changes (NXFMF_OWN), the controller's own changes will
+ * be included in full.
+ *
+ * 4. The controller may cancel a monitor with NXT_FLOW_MONITOR_CANCEL. No
+ * further notifications will be sent on the basis of the canceled monitor
+ * afterward.
+ *
+ *
+ * Buffer Management
+ * =================
+ *
+ * OpenFlow messages for flow monitor notifications can overflow the buffer
+ * space available to the switch, either temporarily (e.g. due to network
+ * conditions slowing OpenFlow traffic) or more permanently (e.g. the sustained
+ * rate of flow table change exceeds the network bandwidth between switch and
+ * controller).
+ *
+ * When Open vSwitch's notification buffer space reaches a limiting threshold,
+ * OVS reacts as follows:
+ *
+ * 1. OVS sends an NXT_FLOW_MONITOR_PAUSED message to the controller, following
+ * all the already queued notifications. After it receives this message,
+ * the controller knows that its view of the flow table, as represented by
+ * flow monitor notifications, is incomplete.
+ *
+ * 2. As long as the notification buffer is not empty:
+ *
+ * - NXMFE_ADD and NXFME_MODIFIED notifications will not be sent.
+ *
+ * - NXFME_DELETED notifications will still be sent, but only for flows
+ * that existed before OVS sent NXT_FLOW_MONITOR_PAUSED.
+ *
+ * - NXFME_ABBREV notifications will not be sent. They are treated as
+ * the expanded version (and therefore only the NXFME_DELETED
+ * components, if any, are sent).
+ *
+ * 3. When the notification buffer empties, OVS sends NXFME_ADD notifications
+ * for flows added since the buffer reached its limit and NXFME_MODIFIED
+ * notifications for flows that existed before the limit was reached and
+ * changed after the limit was reached.
+ *
+ * 4. OVS sends an NXT_FLOW_MONITOR_RESUMED message to the controller. After
+ * it receives this message, the controller knows that its view of the flow
+ * table, as represented by flow monitor notifications, is again complete.
+ *
+ * This allows the maximum buffer space requirement for notifications to be
+ * bounded by the limit plus the maximum number of supported flows.
+ *
+ *
+ * "Flow Removed" messages
+ * =======================
+ *
+ * The flow monitor mechanism is independent of OFPT_FLOW_REMOVED and
+ * NXT_FLOW_REMOVED. Flow monitor updates for deletion are sent if
+ * NXFMF_DELETE is set on a monitor, regardless of whether the
+ * OFPFF_SEND_FLOW_REM flag was set when the flow was added. */
+
+/* NXST_FLOW_MONITOR request.
+ *
+ * The NXST_FLOW_MONITOR request's body consists of an array of zero or more
+ * instances of this structure. The request arranges to monitor the flows
+ * that match the specified criteria, which are interpreted in the same way as
+ * for NXST_FLOW.
+ *
+ * 'id' identifies a particular monitor for the purpose of allowing it to be
+ * canceled later with NXT_FLOW_MONITOR_CANCEL. 'id' must be unique among
+ * existing monitors that have not already been canceled.
+ *
+ * The reply includes the initial flow matches for monitors that have the
+ * NXFMF_INITIAL flag set. No single flow will be included in the reply more
+ * than once, even if more than one requested monitor matches that flow. The
+ * reply will be empty if none of the monitors has NXFMF_INITIAL set or if none
+ * of the monitors initially matches any flows.
+ *
+ * For NXFMF_ADD, an event will be reported if 'out_port' matches against the
+ * actions of the flow being added or, for a flow that is replacing an existing
+ * flow, if 'out_port' matches against the actions of the flow being replaced.
+ * For NXFMF_DELETE, 'out_port' matches against the actions of a flow being
+ * deleted. For NXFMF_MODIFY, an event will be reported if 'out_port' matches
+ * either the old or the new actions. */
+struct nx_flow_monitor_request {
+ ovs_be32 id; /* Controller-assigned ID for this monitor. */
+ ovs_be16 flags; /* NXFMF_*. */
+ ovs_be16 out_port; /* Required output port, if not OFPP_NONE. */
+ ovs_be16 match_len; /* Length of nx_match. */
+ uint8_t table_id; /* One table's ID or 0xff for all tables. */
+ uint8_t zeros[5]; /* Align to 64 bits (must be zero). */
+ /* Followed by:
+ * - Exactly match_len (possibly 0) bytes containing the nx_match, then
+ * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
+ * all-zero bytes. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_monitor_request) == 16);
+
+/* 'flags' bits in struct nx_flow_monitor_request. */
+enum nx_flow_monitor_flags {
+ /* When to send updates. */
+ NXFMF_INITIAL = 1 << 0, /* Initially matching flows. */
+ NXFMF_ADD = 1 << 1, /* New matching flows as they are added. */
+ NXFMF_DELETE = 1 << 2, /* Old matching flows as they are removed. */
+ NXFMF_MODIFY = 1 << 3, /* Matching flows as they are changed. */
+
+ /* What to include in updates. */
+ NXFMF_ACTIONS = 1 << 4, /* If set, actions are included. */
+ NXFMF_OWN = 1 << 5, /* If set, include own changes in full. */
+};
+
+/* NXST_FLOW_MONITOR reply header.
+ *
+ * The body of an NXST_FLOW_MONITOR reply is an array of variable-length
+ * structures, each of which begins with this header. The 'length' member may
+ * be used to traverse the array, and the 'event' member may be used to
+ * determine the particular structure.
+ *
+ * Every instance is a multiple of 8 bytes long. */
+struct nx_flow_update_header {
+ ovs_be16 length; /* Length of this entry. */
+ ovs_be16 event; /* One of NXFME_*. */
+ /* ...other data depending on 'event'... */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_header) == 4);
+
+/* 'event' values in struct nx_flow_update_header. */
+enum nx_flow_update_event {
+ /* struct nx_flow_update_full. */
+ NXFME_ADDED = 0, /* Flow was added. */
+ NXFME_DELETED = 1, /* Flow was deleted. */
+ NXFME_MODIFIED = 2, /* Flow (generally its actions) was changed. */
+
+ /* struct nx_flow_update_abbrev. */
+ NXFME_ABBREV = 3, /* Abbreviated reply. */
+};
+
+/* NXST_FLOW_MONITOR reply for NXFME_ADDED, NXFME_DELETED, and
+ * NXFME_MODIFIED. */
+struct nx_flow_update_full {
+ ovs_be16 length; /* Length is 24. */
+ ovs_be16 event; /* One of NXFME_*. */
+ ovs_be16 reason; /* OFPRR_* for NXFME_DELETED, else zero. */
+ ovs_be16 priority; /* Priority of the entry. */
+ ovs_be16 idle_timeout; /* Number of seconds idle before expiration. */
+ ovs_be16 hard_timeout; /* Number of seconds before expiration. */
+ ovs_be16 match_len; /* Length of nx_match. */
+ uint8_t table_id; /* ID of flow's table. */
+ uint8_t pad; /* Reserved, currently zeroed. */
+ ovs_be64 cookie; /* Opaque controller-issued identifier. */
+ /* Followed by:
+ * - Exactly match_len (possibly 0) bytes containing the nx_match, then
+ * - Exactly (match_len + 7)/8*8 - match_len (between 0 and 7) bytes of
+ * all-zero bytes, then
+ * - Actions to fill out the remainder 'length' bytes (always a multiple
+ * of 8). If NXFMF_ACTIONS was not specified, or 'event' is
+ * NXFME_DELETED, no actions are included.
+ */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_full) == 24);
+
+/* NXST_FLOW_MONITOR reply for NXFME_ABBREV.
+ *
+ * When the controller does not specify NXFMF_OWN in a monitor request, any
+ * flow tables changes due to the controller's own requests (on the same
+ * OpenFlow channel) will be abbreviated, when possible, to this form, which
+ * simply specifies the 'xid' of the OpenFlow request (e.g. an OFPT_FLOW_MOD or
+ * NXT_FLOW_MOD) that caused the change.
+ *
+ * Some changes cannot be abbreviated and will be sent in full:
+ *
+ * - Changes that only partially succeed. This can happen if, for example,
+ * a flow_mod with type OFPFC_MODIFY affects multiple flows, but only some
+ * of those modifications succeed (e.g. due to hardware limitations).
+ *
+ * This cannot occur with the current implementation of the Open vSwitch
+ * software datapath. It could happen with other datapath implementations.
+ *
+ * - Changes that race with conflicting changes made by other controllers or
+ * other flow_mods (not separated by barriers) by the same controller.
+ *
+ * This cannot occur with the current Open vSwitch implementation
+ * (regardless of datapath) because Open vSwitch internally serializes
+ * potentially conflicting changes.
+ *
+ * A flow_mod that does not change the flow table will not trigger any
+ * notification, even an abbreviated one. For example, a "modify" or "delete"
+ * flow_mod that does not match any flows will not trigger a notification.
+ * Whether an "add" or "modify" that specifies all the same parameters that a
+ * flow already has triggers a notification is unspecified and subject to
+ * change in future versions of Open vSwitch.
+ *
+ * OVS will always send the notifications for a given flow table change before
+ * the reply to a OFPT_BARRIER_REQUEST request that precedes the flow table
+ * change. Thus, if the controller does not receive an abbreviated
+ * notification for a flow_mod before the next OFPT_BARRIER_REPLY, it will
+ * never receive one. */
+struct nx_flow_update_abbrev {
+ ovs_be16 length; /* Length is 8. */
+ ovs_be16 event; /* NXFME_ABBREV. */
+ ovs_be32 xid; /* Controller-specified xid from flow_mod. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_update_abbrev) == 8);
+
+/* NXT_FLOW_MONITOR_CANCEL.
+ *
+ * Used by a controller to cancel an outstanding monitor. */
+struct nx_flow_monitor_cancel {
+ ovs_be32 id; /* 'id' from nx_flow_monitor_request. */
+};
+OFP_ASSERT(sizeof(struct nx_flow_monitor_cancel) == 4);
#endif /* openflow/nicira-ext.h */
projects / openvswitch / blobdiff