use warnings;
use strict;
-use POSIX;
-use Algorithm::Diff;
-use Getopt::Long;
+use Pintos::Grading;
-our ($verbose) = 0; # Verbosity of output
+our ($hw) = "filesys";
our (@TESTS); # Tests to run.
-my ($clean) = 0;
-my ($grade) = 0;
+our ($test);
+our ($action);
-GetOptions ("v|verbose+" => \$verbose,
- "h|help" => sub { usage (0) },
- "t|test=s" => \@TESTS,
- "c|clean" => \$clean,
- "g|grade" => \$grade)
- or die "Malformed command line; use --help for help.\n";
-die "Non-option argument not supported; use --help for help.\n"
- if @ARGV > 0;
+parse_cmd_line qw (sm-create sm-full sm-seq-block sm-seq-random sm-random
-sub usage {
- my ($exitcode) = @_;
- print "run-tests, for grading Pintos multiprogramming projects.\n\n";
- print "Invoke from a directory containing a student tarball named by\n";
- print "the submit script, e.g. username.Oct.12.04.20.04.09.tar.gz.\n";
- print "In normal usage, no options are needed.\n\n";
- print "Output is produced in tests.out and details.out.\n\n";
- print "Options:\n";
- print " -c, --clean Remove old output files before starting\n";
- print " -t, --test=TEST Execute TEST only (allowed multiple times)\n";
- print " -g, --grade Instead of running tests, compose grade.out\n";
- print " -v, --verbose Print commands before executing them\n";
- print " -h, --help Print this help message\n";
- exit $exitcode;
-}
-
-# Default set of tests.
-@TESTS = qw (sm-create sm-full sm-seq-block sm-seq-random sm-random
- grow-create grow-seq-sm grow-seq-lg grow-file-size grow-tell
- grow-sparse grow-root-sm grow-root-lg grow-dir-lg grow-two-files
- ) unless @TESTS > 0;
-
-our (%args);
-
-# Handle final grade mode.
-if ($grade) {
- open (OUT, ">grade.out") or die "grade.out: create: $!\n";
-
- open (GRADE, "<grade.txt") or die "grade.txt: open: $!\n";
- while (<GRADE>) {
- last if /^\s*$/;
- print OUT;
- }
- close (GRADE);
-
- my (@tests) = snarf ("tests.out");
- my ($p_got, $p_pos) = $tests[0] =~ m%\((\d+)/(\d+)\)% or die;
-
- my (@review) = snarf ("review.txt");
- my ($part_lost) = (0, 0);
- for (my ($i) = $#review; $i >= 0; $i--) {
- local ($_) = $review[$i];
- if (my ($loss) = /^\s*([-+]\d+)/) {
- $part_lost += $loss;
- } elsif (my ($out_of) = m%\[\[/(\d+)\]\]%) {
- my ($got) = $out_of + $part_lost;
- $got = 0 if $got < 0;
- $review[$i] =~ s%\[\[/\d+\]\]%($got/$out_of)% or die;
- $part_lost = 0;
-
- $p_got += $got;
- $p_pos += $out_of;
- }
- }
- die "Lost points outside a section\n" if $part_lost;
-
- for (my ($i) = 1; $i <= $#review; $i++) {
- if ($review[$i] =~ /^-{3,}\s*$/ && $review[$i - 1] !~ /^\s*$/) {
- $review[$i] = '-' x (length ($review[$i - 1]));
- }
- }
-
- print OUT "\nOVERALL SCORE\n";
- print OUT "-------------\n";
- print OUT "$p_got points out of $p_pos total\n\n";
-
- print OUT map ("$_\n", @tests), "\n";
- print OUT map ("$_\n", @review), "\n";
-
- print OUT "DETAILS\n";
- print OUT "-------\n\n";
- print OUT map ("$_\n", snarf ("details.out"));
-
- exit 0;
-}
-
-if ($clean) {
- # Verify that we're roughly in the correct directory
- # before we go blasting away files.
- choose_tarball ();
+ lg-create lg-full lg-seq-block lg-seq-random lg-random
- xsystem ("rm -rf output pintos", VERBOSE => 1);
- xsystem ("rm -f details.out tests.out", VERBOSE => 1);
-}
+ grow-create grow-seq-sm grow-seq-lg grow-file-size grow-tell
+ grow-sparse grow-too-big grow-root-sm grow-root-lg
+ grow-dir-lg grow-two-files
-# Create output directory, if it doesn't already exist.
--d ("output") || mkdir ("output") or die "output: mkdir: $!\n";
+ dir-mkdir dir-rmdir dir-mk-vine dir-rm-vine dir-mk-tree
+ dir-rm-tree dir-lsdir dir-rm-cwd dir-rm-cwd-cd
+ dir-rm-parent dir-rm-root dir-over-file dir-under-file
+ dir-empty-name dir-open
-# Extract submission.
-extract_tarball () if ! -d "pintos";
+ syn-remove syn-read syn-write syn-rw);
-# Compile submission.
-compile ();
+clean_dir (), exit if $action eq 'clean';
-# Verify that the proper directory was submitted.
--d "pintos/src/threads" or die "pintos/src/threads: stat: $!\n";
+extract_sources ();
+exit if $action eq 'extract';
-# Run and grade the tests.
-our $test;
-our %result;
-our %details;
-our %extra;
-for $test (@TESTS) {
- print "$test: ";
- my ($result) = run_test ($test);
- if ($result eq 'ok') {
- $result = grade_test ($test);
- $result =~ s/\n$//;
- }
- print "$result";
- print " - with warnings" if $result eq 'ok' && defined $details{$test};
- print "\n";
-
- $result{$test} = $result;
-}
+build ();
+exit success () if $action eq 'build';
-# Write output.
-write_grades ();
+run_and_grade_tests ();
+write_grades ();
write_details ();
-\f
-sub choose_tarball {
- my (@tarballs)
- = grep (/^[a-z0-9]+\.[A-Za-z]+\.\d+\.\d+\.\d+\.\d+.\d+\.tar\.gz$/,
- glob ("*.tar.gz"));
- die "no pintos dir and no source tarball\n" if scalar (@tarballs) == 0;
-
- # Sort tarballs in reverse order by time.
- @tarballs = sort { ext_mdyHMS ($b) cmp ext_mdyHMS ($a) } @tarballs;
-
- print "Multiple tarballs: choosing $tarballs[0]\n"
- if scalar (@tarballs) > 1;
- return $tarballs[0];
-}
-
-sub extract_tarball {
- my ($tarball) = choose_tarball ();
-
- mkdir "pintos" or die "pintos: mkdir: $!\n";
- mkdir "pintos/src" or die "pintos: mkdir: $!\n";
-
- print "Extracting $tarball...\n";
- xsystem ("cd pintos/src && tar xzf ../../$tarball",
- DIE => "extraction failed\n");
-
- if (-e "fixme.sh") {
- print "Running fixme.sh...\n";
- xsystem ("sh -e fixme.sh", DIE => "fix script failed\n");
- }
-
- print "Patching...\n";
- xsystem ("patch -fs pintos/src/lib/debug.c < $GRADES_DIR/panic.diff",
- LOG => "patch",
- DIE => "patch failed\n");
-
- open (CONSTANTS, ">pintos/src/constants.h")
- or die "constants.h: create: $!\n";
- print CONSTANTS "#define THREAD_JOIN_IMPLEMENTED 1\n";
- close CONSTANTS;
-}
+exit success () if $action eq 'test';
-sub ext_mdyHMS {
- my ($s) = @_;
- my ($ms, $d, $y, $H, $M, $S) =
- $s =~ /.([A-Za-z]+)\.(\d+)\.(\d+)\.(\d+)\.(\d+).(\d+)\.tar\.gz$/
- or die;
- my ($m) = index ("janfebmaraprmayjunjulaugsepoctnovdec", lc $ms) / 3
- or die;
- return sprintf "%02d-%02d-%02d %02d:%02d:%02d", $y, $m, $d, $H, $M, $S;
-}
-\f
-sub test_source {
- my ($test) = @_;
- my ($src) = "$GRADES_DIR/$test.c";
- -e $src or die "$src: stat: $!\n";
- return $src;
-}
+assemble_final_grade ();
+exit if $action eq 'assemble';
-sub test_constants {
- my ($defines) = "";
- return $defines;
- }
+die "Don't know how to '$action'";
+# Runs $test in directory output/$test.
+# Returns 'ok' if it went ok, otherwise an explanation.
sub run_test {
- my ($test) = @_;
-
- # Reuse older results if any
- if (open (DONE, "<output/$test/done")) {
- my ($status);
- $status = <DONE>;
- chomp $status;
- close (DONE);
- return $status;
- }
-
- # Really run the test.
- my ($status) = really_run_test ($test);
-
- # Save the results for later.
- open (DONE, ">output/$test/done") or die "output/$test/done: create: $!\n";
- print DONE "$status\n";
- close (DONE);
-
- return $status;
-}
-
-sub compile {
- print "Compiling...\n";
- xsystem ("cd pintos/src/vm && make", LOG => "make")
- or return "compile error";
-}
-
-sub really_run_test {
- # Need to run it.
- # If there's residue from an earlier test, move it to .old.
- # If there's already a .old, delete it.
- xsystem ("rm -rf output/$test.old", VERBOSE => 1) if -d "output/$test.old";
- rename "output/$test", "output/$test.old" or die "rename: $!\n"
- if -d "output/$test";
+ my ($result);
- # Make output directory.
- mkdir "output/$test";
- xsystem ("pintos make-disk output/$test/fs.dsk 2 >/dev/null 2>&1",
+ my ($fs_size) = $test ne 'grow-too-big' ? 2 : .25;
+ xsystem ("pintos make-disk output/$test/fs.dsk $fs_size >/dev/null 2>&1",
DIE => "failed to create file system disk");
xsystem ("pintos make-disk output/$test/swap.dsk 2 >/dev/null 2>&1",
DIE => "failed to create swap disk");
# Format disk, install test.
my ($pintos_base_cmd) =
"pintos "
- . "--os-disk=pintos/src/vm/build/os.dsk "
+ . "--os-disk=pintos/src/$hw/build/os.dsk "
. "--fs-disk=output/$test/fs.dsk "
. "--swap-disk=output/$test/swap.dsk "
. "-v";
- unlink ("output/$test/fs.dsk", "output/$test/swap.dsk"),
- return "format/put error"
- if !xsystem ("$pintos_base_cmd put -f $GRADES_DIR/$test $test",
- LOG => "$test/put", TIMEOUT => 60, EXPECT => 1);
-
- # Run.
- my ($timeout) = 60;
- my ($testargs) = defined ($args{$test}) ? " $args{$test}" : "";
- my ($result) =
- xsystem ("$pintos_base_cmd run -q -ex \"$test$testargs\"",
- LOG => "$test/run", TIMEOUT => $timeout, EXPECT => 1)
- ? "ok" : "Bochs error";
- unlink ("output/$test/fs.dsk", "output/$test/swap.dsk");
- return $result;
-}
-
-sub grade_test {
- my ($test) = @_;
-
- my (@output) = snarf ("output/$test/run.out");
-
- my ($grade_func) = "grade_$test";
- $grade_func =~ s/-/_/g;
- if (-e "$GRADES_DIR/$test.exp" && !defined (&$grade_func)) {
- eval {
- verify_common (@output);
- compare_output ("$GRADES_DIR/$test.exp", @output);
- }
- } else {
- eval "$grade_func (\@output)";
+ $result = run_pintos ("$pintos_base_cmd put -f $GRADES_DIR/$test $test",
+ LOG => "$test/put", TIMEOUT => 60);
+ return $result if $result ne 'ok';
+
+ my (@extra_files);
+ push (@extra_files, "child-syn-read") if $test eq 'syn-read';
+ push (@extra_files, "child-syn-wrt") if $test eq 'syn-write';
+ push (@extra_files, "child-syn-rw") if $test eq 'syn-rw';
+ for my $fn (@extra_files) {
+ $result = run_pintos ("$pintos_base_cmd put $GRADES_DIR/$fn $fn",
+ LOG => "$test/put-$fn", TIMEOUT => 60);
+ return "Error running `put $fn': $result" if $result ne 'ok';
}
- if ($@) {
- die $@ if $@ =~ /at \S+ line \d+$/;
- return $@;
- }
- return "ok";
+
+ # Run.
+ return run_pintos ("$pintos_base_cmd run -q -ex \"$test\"",
+ LOG => "$test/run", TIMEOUT => 120);
}
-\f
-sub grade_process_death {
- my ($proc_name, @output) = @_;
+sub grade_dir_lsdir {
+ my (@output) = @_;
verify_common (@output);
@output = get_core_output (@output);
- die "First line of output is not `($proc_name) begin' message.\n"
- if $output[0] ne "($proc_name) begin";
- die "Output contains `FAIL' message.\n"
- if grep (/FAIL/, @output);
- die "Output contains spurious ($proc_name) message.\n"
- if grep (/\($proc_name\)/, @output) > 1;
-}
-
-sub grade_pt_bad_addr {
- grade_process_death ('pt-bad-addr', @_);
-}
-
-sub grade_pt_write_code {
- grade_process_death ('pt-write-code', @_);
-}
-
-sub grade_mmap_unmap {
- grade_process_death ('mmap-unmap', @_);
-}
-\f
-sub verify_common {
- my (@output) = @_;
-
- my (@assertion) = grep (/PANIC/, @output);
- if (@assertion != 0) {
- my ($details) = "Kernel panic:\n $assertion[0]\n";
-
- my (@stack_line) = grep (/Call stack:/, @output);
- if (@stack_line != 0) {
- $details .= " $stack_line[0]\n\n";
- $details .= "Translation of backtrace:\n";
- my (@addrs) = $stack_line[0] =~ /Call stack:((?: 0x[0-9a-f]+)+)/;
- my ($A2L);
- if (`uname -m`
- =~ /i.86|pentium.*|[pk][56]|nexgen|viac3|6x86|athlon.*/) {
- $A2L = "addr2line";
- } else {
- $A2L = "i386-elf-addr2line";
- }
- open (A2L, "$A2L -fe pintos/src/vm/build/kernel.o @addrs|");
- for (;;) {
- my ($function, $line);
- last unless defined ($function = <A2L>);
- $line = <A2L>;
- chomp $function;
- chomp $line;
- $details .= " $function ($line)\n";
- }
- }
-
- if ($assertion[0] =~ /sec_no < d->capacity/) {
- $details .= <<EOF;
-\nThis assertion commonly fails when accessing a file via
-an inode that has been closed and freed. Freeing an inode
-clears all its sector indexes to 0xcccccccc, which is not
-a valid sector number for disks smaller than about 1.6 TB.
-EOF
- }
-
- $extra{$test} = $details;
- die "Kernel panic. Details at end of file.\n"
- }
-
- if (grep (/Pintos booting/, @output) > 1) {
- my ($details);
-
- $details = "Pintos spontaneously rebooted during this test.\n";
- $details .= "This is most often due to unhandled page faults.\n";
- $details .= "Here's the output from the initial boot through the\n";
- $details .= "first reboot:\n\n";
-
- my ($i) = 0;
- local ($_);
- for (@output) {
- $details .= " $_\n";
- last if /Pintos booting/ && ++$i > 1;
- }
- $details{$test} = $details;
- die "Triple-fault caused spontaneous reboot(s). "
- . "Details at end of file.\n";
- }
-
- die "No output at all\n" if @output == 0;
- die "Didn't start up properly: no \"Pintos booting\" startup message\n"
- if !grep (/Pintos booting with.*kB RAM\.\.\./, @output);
- die "Didn't start up properly: no \"Boot complete\" startup message\n"
- if !grep (/Boot complete/, @output);
- die "Didn't shut down properly: no \"Timer: # ticks\" shutdown message\n"
- if !grep (/Timer: \d+ ticks/, @output);
- die "Didn't shut down properly: no \"Powering off\" shutdown message\n"
- if !grep (/Powering off/, @output);
-}
-
-# Get @output without header or trailer.
-sub get_core_output {
- my (@output) = @_;
-
- our ($test);
- my ($first);
- for ($first = 0; $first <= $#output; $first++) {
- $first++, last if $output[$first] =~ /^Executing '$test.*':$/;
- }
-
- my ($last);
- for ($last = $#output; $last >= 0; $last--) {
- $last--, last if $output[$last] =~ /^Timer: \d+ ticks$/;
- }
-
- if ($last < $first) {
- my ($no_first) = $first > $#output;
- my ($no_last) = $last < $#output;
- die "Couldn't locate output.\n";
- }
-
- return @output[$first ... $last];
-}
-
-sub fix_exit_codes {
- my (@output) = @_;
-
- # Remove lines that look like exit codes.
- # Exit codes are supposed to be printed in the form "process: exit(code)"
- # but people get unfortunately creative with it.
- for (my ($i) = 0; $i <= $#output; $i++) {
- local ($_) = $output[$i];
-
- my ($process, $code);
- if ((($process, $code) = /^([-a-z0-9 ]+):.*[ \(](-?\d+)\b\)?$/)
- || (($process, $code) = /^([-a-z0-9 ]+) exit\((-?\d+)\)$/)
- || (($process, $code)
- = /^([-a-z0-9 ]+) \(.*\): exit\((-?\d+)\)$/)
- || (($process, $code) = /^([-a-z0-9 ]+):\( (-?\d+) \) $/)
- || (($code, $process) = /^shell: exit\((-?\d+)\) \| ([-a-z0-9]+)/)
- ) {
- splice (@output, $i, 1);
- $i--;
- }
- }
-
- return @output;
-}
-
-sub compare_output {
- my ($exp, @actual) = @_;
- @actual = fix_exit_codes (get_core_output (map ("$_\n", @actual)));
- die "Program produced no output.\n" if !@actual;
-
- my ($details) = "";
- $details .= "$test actual output:\n";
- $details .= join ('', map (" $_", @actual));
-
- my (@exp) = map ("$_\n", snarf ($exp));
-
- my ($fuzzy_match) = 0;
- while (@exp != 0) {
- my (@expected);
- while (@exp != 0) {
- my ($s) = shift (@exp);
- last if $s eq "--OR--\n";
- push (@expected, $s);
- }
-
- $details .= "\n$test acceptable output:\n";
- $details .= join ('', map (" $_", @expected));
-
- # Check whether they're the same.
- if ($#actual == $#expected) {
- my ($eq) = 1;
- for (my ($i) = 0; $i <= $#expected; $i++) {
- $eq = 0 if $actual[$i] ne $expected[$i];
- }
- return if $eq;
- }
-
- # They differ. Output a diff.
- my (@diff) = "";
- my ($d) = Algorithm::Diff->new (\@expected, \@actual);
- my ($not_fuzzy_match) = 0;
- while ($d->Next ()) {
- my ($ef, $el, $af, $al) = $d->Get (qw (min1 max1 min2 max2));
- if ($d->Same ()) {
- push (@diff, map (" $_", $d->Items (1)));
- } else {
- push (@diff, map ("- $_", $d->Items (1))) if $d->Items (1);
- push (@diff, map ("+ $_", $d->Items (2))) if $d->Items (2);
- if ($d->Items (1)
- || grep (/\($test\)|exit\(-?\d+\)|dying due to|Page fault/,
- $d->Items (2))) {
- $not_fuzzy_match = 1;
- }
- }
- }
- $fuzzy_match = 1 if !$not_fuzzy_match;
-
- $details .= "Differences in `diff -u' format:\n";
- $details .= join ('', @diff);
- $details .= "(This is considered a `fuzzy match'.)\n"
- if !$not_fuzzy_match;
- }
-
- if ($fuzzy_match) {
- $details =
- "This test passed, but with extra, unexpected output.\n"
- . "Please inspect your code to make sure that it does not\n"
- . "produce output other than as specified in the project\n"
- . "description.\n\n"
- . "$details";
- } else {
- $details =
- "This test failed because its output did not match any\n"
- . "of the acceptable form(s).\n\n"
- . "$details";
- }
-
- $details{$test} = $details;
- die "Output differs from expected. Details at end of file.\n"
- unless $fuzzy_match;
-}
-\f
-sub write_grades {
- my (@summary) = snarf ("$GRADES_DIR/tests.txt");
-
- my ($ploss) = 0;
- my ($tloss) = 0;
- my ($total) = 0;
- my ($warnings) = 0;
- for (my ($i) = 0; $i <= $#summary; $i++) {
- local ($_) = $summary[$i];
- if (my ($loss, $test) = /^ -(\d+) ([-a-zA-Z0-9]+):/) {
- my ($result) = $result{$test} || "Not tested.";
-
- if ($result eq 'ok') {
- if (!defined $details{$test}) {
- # Test successful and no warnings.
- splice (@summary, $i, 1);
- $i--;
- } else {
- # Test successful with warnings.
- s/-(\d+) //;
- $summary[$i] = $_;
- splice (@summary, $i + 1, 0,
- " Test passed with warnings. "
- . "Details at end of file.");
- $warnings++;
- }
- } else {
- $ploss += $loss;
- $tloss += $loss;
- splice (@summary, $i + 1, 0,
- map (" $_", split ("\n", $result)));
- }
- } elsif (my ($ptotal) = /^Score: \/(\d+)$/) {
- $total += $ptotal;
- $summary[$i] = "Score: " . ($ptotal - $ploss) . "/$ptotal";
- splice (@summary, $i, 0, " All tests passed.")
- if $ploss == 0 && !$warnings;
- $ploss = 0;
- $warnings = 0;
- $i++;
- }
- }
- my ($ts) = "(" . ($total - $tloss) . "/" . $total . ")";
- $summary[0] =~ s/\[\[total\]\]/$ts/;
-
- open (SUMMARY, ">tests.out");
- print SUMMARY map ("$_\n", @summary);
- close (SUMMARY);
-}
-
-sub write_details {
- open (DETAILS, ">details.out");
- my ($n) = 0;
- for my $test (@TESTS) {
- next if $result{$test} eq 'ok' && !defined $details{$test};
-
- my ($details) = $details{$test};
- next if !defined ($details) && ! -e "output/$test/run.out";
-
- my ($banner);
- if ($result{$test} ne 'ok') {
- $banner = "$test failure details";
- } else {
- $banner = "$test warnings";
- }
-
- print DETAILS "\n" if $n++;
- print DETAILS "--- $banner ", '-' x (50 - length ($banner));
- print DETAILS "\n\n";
-
- if (!defined $details) {
- my (@output) = snarf ("output/$test/run.out");
-
- # Print only the first in a series of recursing panics.
- my ($panic) = 0;
- for my $i (0...$#output) {
- local ($_) = $output[$i];
- if (/PANIC/ && $panic++ > 0) {
- @output = @output[0...$i];
- push (@output,
- "[...details of recursive panic omitted...]");
- last;
- }
- }
- $details = "Output:\n\n" . join ('', map ("$_\n", @output));
- }
- print DETAILS $details;
-
- print DETAILS "\n", "-" x 10, "\n\n$extra{$test}"
- if defined $extra{$test};
- }
- close (DETAILS);
-
-}
-\f
-sub xsystem {
- my ($command, %options) = @_;
- print "$command\n" if $verbose || $options{VERBOSE};
-
- my ($log) = $options{LOG};
-
- my ($pid, $status);
- eval {
- local $SIG{ALRM} = sub { die "alarm\n" };
- alarm $options{TIMEOUT} if defined $options{TIMEOUT};
- $pid = fork;
- die "fork: $!\n" if !defined $pid;
- if (!$pid) {
- if (defined $log) {
- open (STDOUT, ">output/$log.out");
- open (STDERR, ">output/$log.err");
- }
- exec ($command);
- exit (-1);
- }
- waitpid ($pid, 0);
- $status = $?;
- alarm 0;
- };
-
- my ($ok);
- if ($@) {
- die unless $@ eq "alarm\n"; # propagate unexpected errors
- print "Timed out: ";
- for (my ($i) = 0; $i < 10; $i++) {
- kill ('SIGTERM', $pid);
- sleep (1);
- my ($retval) = waitpid ($pid, WNOHANG);
- last if $retval == $pid || $retval == -1;
- print "Waiting for $pid to die" if $i == 0;
- print ".";
- }
- $ok = 1;
- } else {
- if (WIFSIGNALED ($status)) {
- my ($signal) = WTERMSIG ($status);
- die "Interrupted\n" if $signal == SIGINT;
- print "Child terminated with signal $signal\n";
- }
-
- my ($exp_status) = !defined ($options{EXPECT}) ? 0 : $options{EXPECT};
- $ok = WIFEXITED ($status) && WEXITSTATUS ($status) == $exp_status;
+ my ($begin);
+ for my $i (0...$#output) {
+ $begin = $i, last if $output[$i] eq '(dir-lsdir) begin';
}
+ die "\"(dir-lsdir) begin\" does not appear in output\n" if !defined $begin;
-
- if (!$ok && defined $options{DIE}) {
- my ($msg) = $options{DIE};
- if (defined ($log)) {
- chomp ($msg);
- $msg .= "; see output/$log.err and output/$log.out for details\n";
- }
- die $msg;
- } elsif (defined ($log) && $ok) {
- unlink ("output/$log.err");
+ my ($end);
+ for my $i (0...$#output) {
+ $end = $i, last if $output[$i] eq '(dir-lsdir) end';
}
+ die "\"(dir-lsdir) end\" does not appear in output\n" if !defined $end;
+ die "\"begin\" follows \"end\" in output\n" if $begin > $end;
- return $ok;
-}
-
-sub snarf {
- my ($file) = @_;
- open (OUTPUT, $file) or die "$file: open: $!\n";
- my (@lines) = <OUTPUT>;
- chomp (@lines);
- close (OUTPUT);
- return wantarray ? @lines : join ('', map ("$_\n", @lines));
-}
-
-sub files_equal {
- my ($a, $b) = @_;
- my ($equal);
- open (A, "<$a") or die "$a: open: $!\n";
- open (B, "<$b") or die "$b: open: $!\n";
- if (-s A != -s B) {
- $equal = 0;
- } else {
- my ($sa, $sb);
- for (;;) {
- sysread (A, $sa, 1024);
- sysread (B, $sb, 1024);
- $equal = 0, last if $sa ne $sb;
- $equal = 1, last if $sa eq '';
- }
+ my (%count);
+ for my $fn (@output[$begin + 1...$end - 1]) {
+ $fn =~ s/\s+$//;
+ die "Unexpected file \"$fn\" in lsdir output\n"
+ unless grep ($_ eq $fn, qw (. .. dir-lsdir));
+ die "File \"$fn\" listed twice in lsdir output\n"
+ if $count{$fn};
+ $count{$fn}++;
}
- close (A);
- close (B);
- return $equal;
-}
-
-sub file_contains {
- my ($file, $expected) = @_;
- open (FILE, "<$file") or die "$file: open: $!\n";
- my ($actual);
- sysread (FILE, $actual, -s FILE);
- my ($equal) = $actual eq $expected;
- close (FILE);
- return $equal;
+ die "No files in lsdir output\n" if scalar (keys (%count)) == 0;
+ die "File \"dir-lsdir\" missing from lsdir output\n"
+ if !$count{"dir-lsdir"};
}
-sub number_lines {
- my ($ln, $lines) = @_;
- my ($out);
- for my $line (@$lines) {
- chomp $line;
- $out .= sprintf "%4d %s\n", $ln++, $line;
- }
- return $out;
+# This should be improved, but none of the fall 2004 submissions
+# survived the test!
+# I suppose it could be a bug in the test but a lot of the submissions
+# had kernel panics, etc.
+sub grade_syn_rw {
+ verify_common (@_);
}