* DISPLAY DOCUMENTS:: Display active file documents.
* DISPLAY FILE LABEL:: Display the active file label.
* DROP DOCUMENTS:: Remove documents from the active file.
+* ECHO:: Write a string to the output stream.
* ERASE:: Erase a file.
* EXECUTE:: Execute pending transformations.
* FILE LABEL:: Set the active file's label.
* HOST:: Temporarily return to the operating system.
* INCLUDE:: Include a file within the current one.
* PERMISSIONS:: Change permissions on a file.
-* QUIT:: Terminate the PSPP session.
* SET:: Adjust PSPP runtime parameters.
* SHOW:: Display runtime parameters.
* SUBTITLE:: Provide a document subtitle.
active file,
if any. @xref{FILE LABEL}.
-@node DROP DOCUMENTS, ERASE, DISPLAY FILE LABEL, Utilities
+This command is a PSPP extension.
+
+@node DROP DOCUMENTS, ECHO, DISPLAY FILE LABEL, Utilities
@section DROP DOCUMENTS
@vindex DROP DOCUMENTS
@cmd{DROP DOCUMENTS} changes only the active file. It does not modify any
system files stored on disk.
+@node ECHO, ERASE, DROP DOCUMENTS, Utilities
+@section ECHO
+@vindex ECHO
+
+@display
+ECHO 'arbitrary text' .
+@end display
+
+Use @cmd{ECHO} to write arbitrary text to the output stream. The text should be enclosed in quotation marks following the normal rules for string tokens (@pxref{Tokens}).
-@node ERASE, EXECUTE, DROP DOCUMENTS, Utilities
+@node ERASE, EXECUTE, ECHO, Utilities
@comment node-name, next, previous, up
@section ERASE
@vindex ERASE
@cmd{FINISH} terminates the current PSPP session and returns
control to the operating system.
-This command is not valid in interactive mode.
-
@node HOST, INCLUDE, FINISH, Utilities
@comment node-name, next, previous, up
@section HOST
@display
Two possible syntaxes:
- INCLUDE 'filename'.
- @@filename.
+ INCLUDE 'file-name'.
+ @@file-name.
@end display
@cmd{INCLUDE} causes the PSPP command processor to read an
Include files may be nested to any depth, up to the limit of available
memory.
-@node PERMISSIONS, QUIT, INCLUDE, Utilities
+@node PERMISSIONS, SET, INCLUDE, Utilities
@comment node-name, next, previous, up
@section PERMISSIONS
@vindex PERMISSIONS
@display
PERMISSIONS
- FILE='filename'
+ FILE='file-name'
/PERMISSIONS = @{READONLY,WRITEABLE@}.
@end display
This command cannot be used if the SAFER setting is active.
-@node QUIT, SET, PERMISSIONS, Utilities
-@section QUIT
-@vindex QUIT
-
-@display
-Two possible syntaxes:
- QUIT.
- EXIT.
-@end display
-
-@cmd{QUIT} terminates the current PSPP session and returns control
-to the operating system.
-
-This command is not valid within a command file.
-
-@node SET, SHOW, QUIT, Utilities
+@node SET, SHOW, PERMISSIONS, Utilities
@section SET
@vindex SET
/BLANKS=@{SYSMIS,'.',number@}
/DECIMAL=@{DOT,COMMA@}
/FORMAT=fmt_spec
+ /EPOCH=@{AUTOMATIC,year@}
+ /RIB=@{NATIVE,MSBFIRST,LSBFIRST,VAX@}
+ /RRB=@{NATIVE,ISL,ISB,IDL,IDB,VF,VD,VG,ZS,ZL@}
(program input)
/ENDCMD='.'
/MXERRS=max_errs
/MXWARNS=max_warnings
/PROMPT='prompt'
- /VIEWLENGTH=@{MINIMUM,MEDIAN,MAXIMUM,n_lines@}
- /VIEWWIDTH=n_characters
(program execution)
/MEXPAND=@{ON,OFF@}
/CC@{A,B,C,D,E@}=@{'npre,pre,suf,nsuf','npre.pre.suf.nsuf'@}
/DECIMAL=@{DOT,COMMA@}
/FORMAT=fmt_spec
+ /WIB=@{NATIVE,MSBFIRST,LSBFIRST,VAX@}
+ /WRB=@{NATIVE,ISL,ISB,IDL,IDB,VF,VD,VG,ZS,ZL@}
(output routing)
/ECHO=@{ON,OFF@}
/PRINTBACK=@{ON,OFF@}
/RESULTS=@{ON,OFF,TERMINAL,LISTING,BOTH,NONE@}
-(output activation)
- /LISTING=@{ON,OFF@}
- /PRINTER=@{ON,OFF@}
- /SCREEN=@{ON,OFF@}
-
(output driver options)
/HEADERS=@{NO,YES,BLANK@}
/LENGTH=@{NONE,length_in_lines@}
- /LISTING=filename
+ /LISTING=@{ON,OFF,'file-name'@}
/MORE=@{ON,OFF@}
- /PAGER=@{OFF,"pager_name"@}
/WIDTH=@{NARROW,WIDTH,n_characters@}
(logging)
- /JOURNAL=@{ON,OFF@} [filename]
- /LOG=@{ON,OFF@} [filename]
+ /JOURNAL=@{ON,OFF@} ['file-name']
(system files)
/COMPRESSION=@{ON,OFF@}
/SAFER=ON
(obsolete settings accepted for compatibility, but ignored)
- /AUTOMENU=@{ON,OFF@}
- /BEEP=@{ON,OFF@}
- /BLOCK='c'
/BOXSTRING=@{'xxx','xxxxxxxxxxx'@}
/CASE=@{UPPER,UPLOW@}
- /COLOR=@dots{}
/CPI=cpi_value
/DISK=@{ON,OFF@}
- /EJECT=@{ON,OFF@}
- /HELPWINDOWS=@{ON,OFF@}
/HIGHRES=@{ON,OFF@}
/HISTOGRAM='c'
/LOWRES=@{AUTO,ON,OFF@}
/LPI=lpi_value
/MENUS=@{STANDARD,EXTENDED@}
/MXMEMORY=max_memory
- /PTRANSLATE=@{ON,OFF@}
- /RCOLORS=@dots{}
- /RUNREVIEW=@{AUTO,MANUAL@}
/SCRIPTTAB='c'
/TB1=@{'xxx','xxxxxxxxxxx'@}
/TBFONTS='string'
- /WORKDEV=drive_letter
/WORKSPACE=workspace_size
/XSORT=@{YES,NO@}
@end display
@table @asis
@item BLANKS
This is the value assigned to an item data item that is empty or
-contains only whitespace. An argument of SYSMIS or '.' will cause the
+contains only white space. An argument of SYSMIS or '.' will cause the
system-missing value to be assigned to null items. This is the
default. Any real value may be assigned.
@item DECIMAL
+@anchor{SET DECIMAL}
The default DOT setting causes the decimal point character to be
-@samp{.}. A setting of COMMA causes the decimal point character to be
-@samp{,}.
+@samp{.} and the grouping character to be @samp{,}. A setting of COMMA
+causes the decimal point character to be @samp{,} and the grouping
+character to be @samp{.}.
@item FORMAT
Allows the default numeric input/output format to be specified. The
-default is F8.2. @xref{Input/Output Formats}.
+default is F8.2. @xref{Input and Output Formats}.
+
+@item EPOCH
+@anchor{SET EPOCH}
+Specifies the range of years used when a 2-digit year is read from a
+data file or used in a date construction expression (@pxref{Date
+Construction}). If a 4-digit year is specified for the epoch, then
+2-digit years are interpreted starting from that year, known as the
+epoch. If AUTOMATIC (the default) is specified, then the epoch begins
+69 years before the current date.
+
+@item RIB
+@anchor{SET RIB}
+
+PSPP extension to set the byte ordering (endianness) used for reading
+data in IB or PIB format (@pxref{Binary and Hexadecimal Numeric
+Formats}). In MSBFIRST ordering, the most-significant byte appears at
+the left end of a IB or PIB field. In LSBFIRST ordering, the
+least-significant byte appears at the left end. VAX ordering is like
+MSBFIRST, except that each pair of bytes is in reverse order. NATIVE,
+the default, is equivalent to MSBFIRST or LSBFIRST depending on the
+native format of the machine running PSPP.
+
+@item RRB
+@anchor{SET RRB}
+
+PSPP extension to set the floating-point format used for reading data in
+RB format (@pxref{Binary and Hexadecimal Numeric Formats}). The
+possibilities are:
+
+@table @asis
+@item NATIVE
+The native format of the machine running PSPP. Equivalent to either IDL
+or IDB.
+
+@item ISL
+32-bit IEEE 754 single-precision floating point, in little-endian byte
+order.
+
+@item ISB
+32-bit IEEE 754 single-precision floating point, in big-endian byte
+order.
+
+@item IDL
+64-bit IEEE 754 double-precision floating point, in little-endian byte
+order.
+
+@item IDB
+64-bit IEEE 754 double-precision floating point, in big-endian byte
+order.
+
+@item VF
+32-bit VAX F format, in VAX-endian byte order.
+
+@item VD
+64-bit VAX D format, in VAX-endian byte order.
+
+@item VG
+64-bit VAX G format, in VAX-endian byte order.
+
+@item ZS
+32-bit IBM Z architecture short format hexadecimal floating point, in
+big-endian byte order.
+
+@item ZL
+64-bit IBM Z architecture long format hexadecimal floating point, in
+big-endian byte order.
+
+Z architecture also supports IEEE 754 floating point. The ZS and ZL
+formats are only for use with very old input files.
+@end table
+The default is NATIVE.
@end table
Program input subcommands affect the way that programs are parsed when
-they are typed interactively or run from a script. They are
+they are typed interactively or run from a command file. They are
@table @asis
@item ENDCMD
@item PROMPT
The command prompt. The default is @samp{PSPP> }.
-
-@item VIEWLENGTH
-The length of the screen in lines. MINIMUM means 25 lines, MEDIAN and
-MAXIMUM mean 43 lines. Otherwise specify the number of lines. Normally
-PSPP should auto-detect your screen size so this shouldn't have to be
-used.
-
-@item VIEWWIDTH
-The width of the screen in characters. Normally 80 or 132.
@end table
Program execution subcommands control the way that PSPP commands
@itemx CCC
@itemx CCD
@itemx CCE
-Set up custom currency formats. The argument is a string which must
-contain exactly three commas or exactly three periods. If commas, then
-the grouping character for the currency format is @samp{,}, and the
-decimal point character is @samp{.}; if periods, then the situation is
-reversed.
-
-The commas or periods divide the string into four fields, which are, in
-order, the negative prefix, prefix, suffix, and negative suffix. When a
-value is formatted using the custom currency format, the prefix precedes
-the value formatted and the suffix follows it. In addition, if the
-value is negative, the negative prefix precedes the prefix and the
-negative suffix follows the suffix.
+@anchor{CCx Settings}
+
+Set up custom currency formats. @xref{Custom Currency Formats}, for
+details.
@item DECIMAL
The default DOT setting causes the decimal point character to be
@item FORMAT
Allows the default numeric input/output format to be specified. The
-default is F8.2. @xref{Input/Output Formats}.
+default is F8.2. @xref{Input and Output Formats}.
+
+@item WIB
+@anchor{SET WIB}
+
+PSPP extension to set the byte ordering (endianness) used for writing
+data in IB or PIB format (@pxref{Binary and Hexadecimal Numeric
+Formats}). In MSBFIRST ordering, the most-significant byte appears at
+the left end of a IB or PIB field. In LSBFIRST ordering, the
+least-significant byte appears at the left end. VAX ordering is like
+MSBFIRST, except that each pair of bytes is in reverse order. NATIVE,
+the default, is equivalent to MSBFIRST or LSBFIRST depending on the
+native format of the machine running PSPP.
+
+@item WRB
+@anchor{SET WRB}
+
+PSPP extension to set the floating-point format used for writing data in
+RB format (@pxref{Binary and Hexadecimal Numeric Formats}). The choices
+are the same as SET RIB. The default is NATIVE.
@end table
Output routing subcommands affect where the output of transformations
Currently not used.
@end table
-Output activation subcommands affect whether output devices of
-particular types are enabled. These subcommands are
-
-@table @asis
-@item LISTING
-Enable or disable listing devices.
-
-@item PRINTER
-Enable or disable printer devices.
-
-@item SCREEN
-Enable or disable screen devices.
-@end table
-
Output driver option subcommands affect output drivers' settings. These
subcommands are
@itemx MORE
@itemx PAGER
@itemx WIDTH
-Currently not used.
@end table
+@cindex headers
+@cindex length
+@cindex listing
+@cindex more
+@cindex pager
+@cindex width
+
+
Logging subcommands affect logging of commands executed to external
files. These subcommands are
@table @asis
@item SAFER
-When set, this setting cannot ever be reset, for obvious security
-reasons. Setting this option disables the following operations:
+Setting this option disables the following operations:
@itemize @bullet
@item
@item
The PERMISSIONS command.
@item
-Pipe filenames (filenames beginning or ending with @samp{|}).
+Pipes (file names beginning or ending with @samp{|}).
@end itemize
Be aware that this setting does not guarantee safety (commands can still
overwrite files, for instance) but it is an improvement.
+When set, this setting cannot be reset during the same session, for
+obvious security reasons.
@end table
@node SHOW, SUBTITLE, SET, Utilities
@display
SHOW
- /@var{subcommand}
-
+ [ALL]
+ [BLANKS]
+ [CC]
+ [CCA]
+ [CCB]
+ [CCC]
+ [CCD]
+ [CCE]
+ [COPYING]
+ [DECIMALS]
+ [ENDCMD]
+ [FORMAT]
+ [LENGTH]
+ [MXERRS]
+ [MXLOOPS]
+ [MXWARNS]
+ [SCOMPRESSION]
+ [UNDEFINED]
+ [WARRANTY]
+ [WEIGHT]
+ [WIDTH]
@end display
-@cmd{SHOW} can be used to display the current state of PSPP's
-execution parameters. All of the parameters which can be changed
-using @code{SET} @xref{SET}, can be examined using @cmd{SHOW}, by
-using a subcommand with the same name.
-In addition, @code{SHOW} supports the following subcommands:
+@cmd{SHOW} can be used to display the current state of PSPP's execution
+parameters. Parameters that can be changed using @cmd{SET}
+(@pxref{SET}), can be examined using @cmd{SHOW} using the subcommand
+with the same name. @code{SHOW} supports the following additional
+subcommands:
@table @code
+@item ALL
+Show all settings.
+@item CC
+Show all custom currency settings (CCA through CCE).
@item WARRANTY
Show details of the lack of warranty for PSPP.
@item COPYING
-Display the terms of PSPP's copyright licence @ref{License}.
+Display the terms of PSPP's copyright licence (@pxref{License}).
@end table
-
+Specifying @cmd{SHOW} without any subcommands is equivalent to SHOW ALL.
@node SUBTITLE, TITLE, SHOW, Utilities
@section SUBTITLE