* CORRELATIONS:: Correlation tables.
* CROSSTABS:: Crosstabulation tables.
* FACTOR:: Factor analysis and Principal Components analysis.
+* GLM:: Univariate Linear Models.
* LOGISTIC REGRESSION:: Bivariate Logistic Regression.
* MEANS:: Average values and other statistics.
* NPAR TESTS:: Nonparametric tests.
@{BOX,NOBOX@}
/CELLS=@{COUNT,ROW,COLUMN,TOTAL,EXPECTED,RESIDUAL,SRESIDUAL,
ASRESIDUAL,ALL,NONE@}
+ /COUNT=@{ASIS,CASE,CELL@}
+ @{ROUND,TRUNCATE@}
/STATISTICS=@{CHISQ,PHI,CC,LAMBDA,UC,BTAU,CTAU,RISK,GAMMA,D,
KAPPA,ETA,CORR,ALL,NONE@}
/BARCHART
If @subcmd{CELLS} is not specified at all then only @subcmd{COUNT}
will be selected.
+By default, crosstabulation and statistics use raw case weights,
+without rounding. Use the @subcmd{/COUNT} subcommand to perform
+rounding: CASE rounds the weights of individual weights as cases are
+read, CELL rounds the weights of cells within each crosstabulation
+table after it has been constructed, and ASIS explicitly specifies the
+default non-rounding behavior. When rounding is requested, ROUND, the
+default, rounds to the nearest integer and TRUNCATE rounds toward
+zero.
+
The @subcmd{STATISTICS} subcommand selects statistics for computation:
@table @asis
@cindex data reduction
@display
-FACTOR VARIABLES=@var{var_list}
+FACTOR @{
+ VARIABLES=@var{var_list},
+ MATRIX IN (@{CORR,COV@}=@{*,@var{file_spec}@})
+ @}
[ /METHOD = @{CORRELATION, COVARIANCE@} ]
[ /ROTATION=@{VARIMAX, EQUAMAX, QUARTIMAX, PROMAX[(@var{k})], NOROTATE@}]
- [ /PRINT=[INITIAL] [EXTRACTION] [ROTATION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [KMO] [SIG] [ALL] [DEFAULT] ]
+ [ /PRINT=[INITIAL] [EXTRACTION] [ROTATION] [UNIVARIATE] [CORRELATION] [COVARIANCE] [DET] [KMO] [AIC] [SIG] [ALL] [DEFAULT] ]
[ /PLOT=[EIGEN] ]
The @cmd{FACTOR} command performs Factor Analysis or Principal Axis Factoring on a dataset. It may be used to find
common factors in the data or for data reduction purposes.
-The @subcmd{VARIABLES} subcommand is required. It lists the variables
-which are to partake in the analysis. (The @subcmd{ANALYSIS}
+The @subcmd{VARIABLES} subcommand is required (unless the @subcmd{MATRIX IN}
+subcommand is used).
+It lists the variables which are to partake in the analysis. (The @subcmd{ANALYSIS}
subcommand may optionally further limit the variables that
-participate; it is not useful and implemented only for compatibility.)
+participate; it is useful primarily in conjunction with @subcmd{MATRIX IN}.)
+
+If @subcmd{MATRIX IN} instead of @subcmd{VARIABLES} is specified, then the analysis
+is performed on a pre-prepared correlation or covariance matrix file instead of on
+individual data cases. Typically the matrix file will have been generated by
+@cmd{MATRIX DATA} (@pxref{MATRIX DATA}) or provided by a third party.
+If specified, @subcmd{MATRIX IN} must be followed by @samp{COV} or @samp{CORR},
+then by @samp{=} and @var{file_spec} all in parentheses.
+@var{file_spec} may either be an asterisk, which indicates the currently loaded
+dataset, or it may be a filename to be loaded. @xref{MATRIX DATA} for the expected
+format of the file.
The @subcmd{/EXTRACTION} subcommand is used to specify the way in which factors (components) are extracted from the data.
If @subcmd{PC} is specified, then Principal Components Analysis is used.
The covariance matrix is printed.
@item @subcmd{DET}
The determinant of the correlation or covariance matrix is printed.
+@item @subcmd{AIC}
+ The anti-image covariance and anti-image correlation matrices are printed.
@item @subcmd{KMO}
The Kaiser-Meyer-Olkin measure of sampling adequacy and the Bartlett test of sphericity is printed.
@item @subcmd{SIG}
values for the particular coefficient are missing.
The default is @subcmd{LISTWISE}.
+@node GLM
+@section GLM
+
+@vindex GLM
+@cindex univariate analysis of variance
+@cindex fixed effects
+@cindex factorial anova
+@cindex analysis of variance
+@cindex ANOVA
+
+
+@display
+GLM @var{dependent_vars} BY @var{fixed_factors}
+ [/METHOD = SSTYPE(@var{type})]
+ [/DESIGN = @var{interaction_0} [@var{interaction_1} [... @var{interaction_n}]]]
+ [/INTERCEPT = @{INCLUDE|EXCLUDE@}]
+ [/MISSING = @{INCLUDE|EXCLUDE@}]
+@end display
+
+The @cmd{GLM} procedure can be used for fixed effects factorial Anova.
+
+The @var{dependent_vars} are the variables to be analysed.
+You may analyse several variables in the same command in which case they should all
+appear before the @code{BY} keyword.
+
+The @var{fixed_factors} list must be one or more categorical variables. Normally it
+will not make sense to enter a scalar variable in the @var{fixed_factors} and doing
+so may cause @pspp{} to do a lot of unnecessary processing.
+
+The @subcmd{METHOD} subcommand is used to change the method for producing the sums of
+squares. Available values of @var{type} are 1, 2 and 3. The default is type 3.
+
+You may specify a custom design using the @subcmd{DESIGN} subcommand.
+The design comprises a list of interactions where each interaction is a
+list of variables separated by a @samp{*}. For example the command
+@display
+GLM subject BY sex age_group race
+ /DESIGN = age_group sex group age_group*sex age_group*race
+@end display
+@noindent specifies the model @math{subject = age_group + sex + race + age_group*sex + age_group*race}.
+If no @subcmd{DESIGN} subcommand is specified, then the default is all possible combinations
+of the fixed factors. That is to say
+@display
+GLM subject BY sex age_group race
+@end display
+implies the model
+@math{subject = age_group + sex + race + age_group*sex + age_group*race + sex*race + age_group*sex*race}.
+
+
+The @subcmd{MISSING} subcommand determines the handling of missing
+variables.
+If @subcmd{INCLUDE} is set then, for the purposes of GLM analysis,
+only system-missing values are considered
+to be missing; user-missing values are not regarded as missing.
+If @subcmd{EXCLUDE} is set, which is the default, then user-missing
+values are considered to be missing as well as system-missing values.
+A case for which any dependent variable or any factor
+variable has a missing value is excluded from the analysis.
+
@node LOGISTIC REGRESSION
@section LOGISTIC REGRESSION
QUICK CLUSTER @var{var_list}
[/CRITERIA=CLUSTERS(@var{k}) [MXITER(@var{max_iter})] CONVERGE(@var{epsilon}) [NOINITIAL]]
[/MISSING=@{EXCLUDE,INCLUDE@} @{LISTWISE, PAIRWISE@}]
- [/PRINT=@{INITIAL@} @{CLUSTERS@}]
+ [/PRINT=@{INITIAL@} @{CLUSTER@}]
@end display
The @cmd{QUICK CLUSTER} command performs k-means clustering on the
The @subcmd{PRINT} subcommand requests additional output to be printed.
If @subcmd{INITIAL} is set, then the initial cluster memberships will
be printed.
-If @subcmd{CLUSTERS} is set, the cluster memberships of the individual
+If @subcmd{CLUSTER} is set, the cluster memberships of the individual
cases will be displayed (potentially generating lengthy output).
Cases are excluded on a listwise basis; if any of the variables in @var{var_list}
or if the variable @var{state_var} is missing, then the entire case will be
excluded.
+
+@c LocalWords: subcmd subcommand