+openvswitch (1.8.90-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Nothing yet! Try NEWS...
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 07 May 2012 14:14:52 +0900
+
+openvswitch (1.8.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - New FAQ. Please send updates and additions!
+ - Authors of controllers, please read the new section titled "Action
+ Reproduction" in DESIGN, which describes an Open vSwitch change in
+ behavior in corner cases that may affect some controllers.
+ - ovs-l3ping:
+ - A new test utility that can create L3 tunnel between two Open
+ vSwitches and detect connectivity issues.
+ - ovs-ofctl:
+ - New --sort and --rsort options for "dump-flows" command.
+ - "mod-port" command can now control all OpenFlow config flags.
+ - OpenFlow:
+ - Allow general bitwise masking for IPv4 and IPv6 addresses in
+ IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
+ were allowed.)
+ - Allow support for arbitrary Ethernet masks. (Previously, only
+ the multicast bit in the destination address could be individually
+ masked.)
+ - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
+ - The OFPST_QUEUE request now reports an error if a specified port or
+ queue does not exist, or for requests for a specific queue on all
+ ports, if the specified queue does not exist on any port. (Previous
+ versions generally reported an empty set of results.)
+ - New "flow monitor" feature to allow controllers to be notified of
+ flow table changes as they happen.
+ - Additional protocols are not mirrored and dropped when forward-bpdu is
+ false. For a full list, see the ovs-vswitchd.conf.db man page.
+ - Open vSwitch now sends RARP packets in situations where it previously
+ sent a custom protocol, making it consistent with behavior of QEMU and
+ VMware.
+ - All Open vSwitch programs and log files now show timestamps in UTC,
+ instead the local timezone, by default.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
+
+openvswitch (1.7.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - kernel modules are renamed. openvswitch_mod.ko is now
+ openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
+ - Increased the number of NXM registers to 8.
+ - Added ability to configure dscp setting for manager and controller
+ connections. By default, these connections have a DSCP value of
+ Internetwork Control (0xc0).
+ - Added the granular link health statistics, 'cfm_health', to an
+ interface.
+ - OpenFlow:
+ - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
+ - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
+ multipart messages.
+ - ovs-ofctl:
+ - Added the "dump-ports-desc" command to retrieve port
+ information using the new port description multipart messages.
+ - ovs-test:
+ - Added support for spawning ovs-test server from the client.
+ - Now ovs-test is able to automatically create test bridges and ports.
+ - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
+ - The "coverage/log" command previously available through ovs-appctl
+ has been replaced by "coverage/show". The new command replies with
+ coverage counter values, instead of logging them.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 07 May 2012 14:11:52 +0900
+
+openvswitch (1.6.1-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
+
+openvswitch (1.6.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - bonding
+ - LACP bonds no longer fall back to balance-slb when negotiations fail.
+ Instead they drop traffic.
+ - The default bond_mode changed from SLB to active-backup, to protect
+ unsuspecting users from the significant risks of SLB bonds (which are
+ documented in vswitchd/INTERNALS).
+ - Load balancing can be disabled by setting the bond-rebalance-interval
+ to zero.
+ - OpenFlow:
+ - Added support for bitwise matching on TCP and UDP ports.
+ See ovs-ofctl(8) for more information.
+ - NXM flow dumps now include times elapsed toward idle and hard
+ timeouts.
+ - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
+ controllers more precise control over which OpenFlow messages they
+ receive asynchronously.
+ - New "fin_timeout" action.
+ - Added "fin_timeout" support to "learn" action.
+ - The default MAC learning timeout has been increased from 60 seconds
+ to 300 seconds. The MAC learning timeout is now configurable.
+ - When QoS settings for an interface do not configure a default queue
+ (queue 0), Open vSwitch now uses a default configuration for that
+ queue, instead of dropping all packets as in previous versions.
+ - Logging to console and file will have UTC timestamp as a default for all
+ the daemons. An example of the default format is 2012-01-27T16:35:17Z.
+ ovs-appctl can be used to change the default format as before.
+ - New support for limiting the number of flows in an OpenFlow flow
+ table, with configurable policy for evicting flows upon
+ overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
+ for more information.
+ - New "enable-async-messages" column in the Controller table. If set to
+ false, OpenFlow connections to the controller will initially have all
+ asynchronous messages disabled, overriding normal OpenFlow behavior.
+ - ofproto-provider interface:
+ - "struct rule" has a new member "used" that ofproto implementations
+ should maintain by updating with ofproto_rule_update_used().
+ - ovsdb-client:
+ - The new option --timestamp causes the "monitor" command to print
+ a timestamp with every update.
+ - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
+
+ -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
+
+openvswitch (1.5.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - OpenFlow:
+ - Added support for querying, modifying, and deleting flows
+ based on flow cookie when using NXM.
+ - Added new NXM_PACKET_IN format.
+ - ovs-ofctl:
+ - Added daemonization support to the monitor and snoop commands.
+ - ovs-vsctl:
+ - The "find" command supports new set relational operators
+ {=}, {!=}, {<}, {>}, {<=}, and {>=}.
+ - ovsdb-tool now uses the typical database and schema installation
+ directories as defaults.
+
+ -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
+
+openvswitch (1.4.0+git20120426-1) unstable; urgency=low
+
+ * New upstream release fixing the following bugs:
+ o Broken log rotation.
+ o Use-after-free error when ports disappear.
+ o Minor memory leaks.
+ o Testsuite failures on big-endian architectures.
+
+ -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
+
+openvswitch (1.4.0+git20120321-1) unstable; urgency=low
+
+ * New upstream version including:
+ o Features:
+ - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
+ - vswitchd: Make the MAC entry aging time configurable.
+ - mac-learning: Increase MAC learning timeout to 300 seconds.
+ o Bug fixes:
+ - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
+ queues.
+ - netlink-socket: Increase Netlink socket receive buffer size.
+ - ofproto: Fix code that keeps track of MTU.
+ - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
+ - bond: Incorrectly reported an error in appctl.
+ - socket-util: Unlink Unix domain sockets that bind but fail to connect.
+ - bridge: Remove unwanted ports at time of ofproto creation.
+ - dpif-linux: Make dpif_linux_port_query_by_name() query only one
+ datapath.
+ - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
+ - configure: Try to extract kernel source directory from build Makefile.
+ - vswitchd: Always configure a default queue for QoS.
+ - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
+ - sflow_agent: Use snprintf() in place of sprintf().
+ o Packaging:
+ - Move PKI directory to FHS-compliant location. Closes: #661090.
+ Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
+ this bug.
+ - Use a different way to avoid failing install without kernel module.
+ - Avoid unit test failure when doing "unofficial" builds.
+ - Bump standards-version to 3.9.3.
+ - Remove some useless files from the dkms package.
+ - Clean .pyc files in "clean" target.
+ - Remove po-debconf build dependency.
+ - Build-depend on python-all to pull in all Python versions.
+ - Add missing ${python:Depends} to openvswitch-test package.
+ - Improve long descriptions so as to better describe the packages.
+ - Bump debhelper compat level to 8 and make build-depends consistent.
+ - Fix exit status of openvswitch-switch init script "status" command.
+ - Use provided kernel source dir instead of host kernel version.
+ - Do not run "make" if "configure" fails during DKMS build.
+ - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
+ - Fix dependencies for openvswitch-datapath-dkms package.
+ - Don't install Python modules for obsolete Python versions.
+ - Add dependency on ${misc:Depends} to openvswitch-test
+ o Documentation improvements:
+ - ovsdb-doc: Use minus sign in negative numbers in nroff output.
+ - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
+ hyphen.
+ - ovsdb-doc: Put NAME section into generated manpage.
+ - Fix typo in manpage.
+ - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
+ - netdev: Fix typo in error message.
+ - INSTALL.Linux: minor typo
+
+ * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
+ of the packaging fixes listed above.
+
+ * This version fixes most of the lintian errors described in bug
+ #663051, but a few remain, so this upload does not close that bug. I
+ believe that this upload should be suitable for downgrading that bug's
+ severity.
+
+ -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
+
+openvswitch (1.4.0-2+nmu1) unstable; urgency=low
+
+ * Non maintainer upload.
+ * Removes all patches in debian/patches, because they are patching stuff
+ inconditionally in debian/*, and this should be applied by default.
+ * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
+ the kernel module builds as expected (Closes: #659685).
+
+ -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
+
+openvswitch (1.4.0-2) unstable; urgency=low
+
+ * Use explicit DKMS variable for kernel source directory
+ - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
+ - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
+ - 0001-debian-Use-provided-kernel-source-dir.patch
+ - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
+ - (closes: #659685)
+ * Don't install Python modules for obsolete Python versions
+ - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
+
+ -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
+
+openvswitch (1.4.0-1) unstable; urgency=low
+ [ Open vSwitch team ]
+ * New upstream version
+ - Compatible with Open vSwitch kernel module included in Linux 3.3.
+ - New "VLAN splinters" feature to work around buggy device drivers
+ in old Linux versions. (This feature is deprecated. When
+ broken device drivers are no longer in widespread use, we will
+ delete this feature.) See ovs-vswitchd.conf.db(5) for more
+ information.
+ - OpenFlow:
+ - Added ability to match on IPv6 flow label through NXM.
+ - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
+ - Added ability to match on TTL in IPv4 and IPv6 through NXM.
+ - Added ability to modify ECN bits in IPv4.
+ - Added ability to modify TTL in IPv4.
+ - ovs-vswitchd:
+ - Don't require the "normal" action to use mirrors. Traffic will
+ now be properly mirrored for any flows, regardless of their
+ actions.
+ - Track packet and byte statistics sent on mirrors.
+ - ovs-appctl:
+ - New "fdb/flush" command to flush bridge's MAC learning table.
+ - ovs-test:
+ - A new distributed testing tool that allows one to diagnose performance
+ and connectivity issues. This tool currently is not included in RH or
+ Xen packages.
+ - RHEL packaging now supports integration with Red Hat network scripts.
+ - Debian: Depend on python (>= 2.7) | python-argparse instead of
+ python-argparse to avoid pulling in python2.6
+ (closes: #653645)
+
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
+
openvswitch (1.3.0-1) unstable; urgency=low
[ Open vSwitch team ]
* New upstream version
"trunk", "native-tagged" and "native-untagged".
- test-openflowd has been removed. Please use ovs-vswitchd instead.
- -- Open vSwitch team <dev@openvswitch.org> Mon, xx xxx xxxx 23:36:00 +0000
+ -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
openvswitch (1.2.0-1) unstable; urgency=low