-*- text -*-
-* The tests in tests/ don't apply the grading patches.
-
-* We need better and more example programs.
-
- - Need an mmap example program as a replacement for the crappy mmap FAQ
- question.
-
- - How about `diff' and `cmp' programs?
-
-* Make it clear that the students own their code, because there was some
- confusion on that point.
-
-* Threads:
-
- - join-invalid doesn't compile if tid_t is not scalar type.
-
- - mlfqs tests suck. They aren't even correct, e.g. the amarv
- submission from win0405 is graded incorrectly.
+* In grading scripts, warn when a fault is caused by an attempt to
+ write to the kernel text segment. (Among other things we need to
+ explain that "text" means "code".)
+
+* Reconsider command line arg style--confuses everyone.
+
+* Internal tests.
+
+* Godmar: Extend memory leak robustness tests.
+ multi-oom should still pass in project 3/4 because kernel will run out
+ of kernel pool memory before running out of swap space.
+
+* Godmar: Another area is concurrency. I noticed that I had passed all
+ tests with bochs 2.2.1 (in reproducibility mode). Then I ran them
+ with qemu and hit two deadlocks (one of them in rox-*,
+ incidentally). After fixing those deadlocks, I upgraded to bochs
+ 2.2.5 and hit yet another deadlock in reproducibility mode that
+ didn't show up in 2.2.1. All in all, a standard grading run would
+ have missed 3 deadlocks in my code. I'm not sure how to exploit
+ that for grading - either run with qemu n times (n=2 or 3), or run
+ it with bochs and a set of -j parameters. Some of which could be
+ known to the students, some not, depending on preference. (I ported
+ the -j patch to bochs 2.2.5 -
+ http://people.cs.vt.edu/~gback/pintos/bochs-2.2.5.jitter.patch but I
+ have to admit I never tried it so I don't know if it would have
+ uncovered the deadlocks that qemu and the switch to 2.2.5
+ uncovered.)
+
+* Godmar: There is also the option to require students to develop test
+ workloads themselves, for instance, to demonstrate the effectiveness
+ of a particular algorithm (page eviction & buffer cache replacement
+ come to mind.) This could involve a problem of the form: develop a
+ workload that you cover well, and develop a "worst-case" load where
+ you algorithm performs poorly, and show the results of your
+ quantitative evaluation in your report - this could then be part of
+ their test score.
+
+* Godmar: the spec says that illegal syscall arguments can be handled either by
+ terminating the process, or by returning an error code such as -1.
+
+ Looking at http://gback.cs.vt.edu:8080/source/xref/tests/userprog/write-bad-ptr.c
+ and http://gback.cs.vt.edu:8080/source/xref/tests/userprog/write-bad-ptr.ck
+ I'm wondering if write-bad-ptr isn't forcing them to terminate the
+ process(?). Even though write-bad-ptr.ck has a provision to allow
+ continuation after returning -1, wouldn't it still fail since the test
+ executes:
+ fail ("should have exited with -1");
+ ?
+
+* Godmar: mmap-inherit needs a IGNORE_USER_FAULTS since we say to "not output
+ any messages Pintos doesn't already print." - which technically puts
+ the onus on us to ignore the default page fault msg whenever a test is
+ expected to fault.
+
+* Godmar: add _end to user.lds script and construct some tests that fail
+ unless students check a region for validity rather than just the first
+ address of a region. Right now, unfortunately, they pass all p2 tests
+ with just checking the first address. [A possible problem is that the
+ tests may be unable to tell termination due to unintentional fault
+ from willful termination when address check fails. Should we require
+ they return -1/EINVAL on a bad address and disallow termination? Or
+ construct a test that they'll likely fail if they unintentionally
+ terminate, maybe while holding the filesystem lock? Or require that
+ the diagnostic message only be output when fault occurs in user mode?
+ Something to think about.]
+
+* Threads project:
+
+ - Godmar:
+
+ >> Describe a potential race in thread_set_priority() and explain how
+ >> your implementation avoids it. Can you use a lock to avoid this race?
+
+ I'm not sure what you're getting at here:
+ If changing the priority of a thread involves accessing the ready
+ list, then of course there's a race with interrupt handlers and locks
+ can't be used to resolve it.
+
+ Changing the priority however also involves a race with respect to
+ accessing a thread's "priority" field - this race is with respect to
+ other threads that attempt to donate priority to the thread that's
+ changing its priority. Since this is a thread-to-thread race, I would
+ tend to believe that locks could be used, although I'm not certain. [
+ I should point out, though, that lock_acquire currently disables
+ interrupts - the purpose of which I had doubted in an earlier email,
+ since sema_down() sufficiently establishes mutual exclusion. Taking
+ priority donation into account, disabling interrupts prevents the race
+ for the priority field, assuming the priority field of each thread is
+ always updated with interrupts disabled. ]
+
+ What answer are you looking for for this design document question?
+
+ - Godmar: Another thing: one group passed all tests even though they
+ wake up all waiters on a lock_release(), rather than just
+ one. Since there's never more than one waiter in our tests, they
+ didn't fail anything. Another possible TODO item - this could be
+ part a series of "regression tests" that check that they didn't
+ break basic functionality in project 1. I don't think this would
+ be insulting to the students.
* Userprog project:
- - Don't emphasize that stuff needs to be copied from user space to
- kernel space. Instead, emphasize validation and suggest that
- copying is a common solution and that it will be necessary in
- project 3 and in real OSes. Also revise the grading criteria to
- match.
-
- - Move `join' implementation here, from `threads' project, to help
- normalize the project difficulties.
-
- - The semantics of the join system call should change so that it
- only returns the exit code once.
-
- - Mark read-only pages as actually read-only in the page table. Or,
- since this was consistently rated as the easiest project by the
- students, require them to do it.
-
- - Don't provide per-process pagedir implementation but only
- single-process implementation and require students to implement
- the separation? This project was rated as the easiest after all.
- Alternately we could just remove the synchronization on pid
- selection and check that students fix it.
+ - Get rid of rox--causes more trouble than it's worth
+
+ - Extra credit: specifics on how to implement sbrk, malloc.
+ Godmar: I have a sample solution and tests for that! Stay tuned.
+
+ - Godmar: We're missing tests that pass arguments to system calls
+ that span multiple pages, where some are mapped and some are not.
+ An implementation that only checks the first page, rather than all
+ pages that can be touched during a call to read()/write() passes
+ all tests.
+
+ - Godmar: There does not appear to be a test that checks that they
+ close all fd's on exit. Idea: add statistics & self-diagnostics
+ code to palloc.c and malloc.c. Self-diagnostics code could be
+ used for debugging. The statistics code would report how much
+ kernel memory is free. Add a system call
+ "get_kernel_memory_information". User programs could engage in a
+ variety of activities and notice leaks by checking the kernel
+ memory statistics.
+ - note: multi-oom tests that now.
+
+ - Godmar: In the wait() tests, there's currently no test that tests
+ that a process can only wait for its own children. There's only
+ one test that tests that wait() on an invalid pid returns -1 (or
+ kills the process), but no test where a valid pid is used that is
+ not a child of the current process.
+
+ The current tests also do not ensure that both scenarios (parent waits
+ first vs. child exits first) are exercised. In this context, I'm
+ wondering if we should add a sleep() system call that would export
+ timer_sleep() to user processes; this would allow the construction of
+ such a test. It would also make it easier to construct a test for the
+ valid-pid, but not-a-child scenario.
+
+ As in Project 4, the baseline implementation of timer_sleep() should
+ suffice, so this would not necessarily require basing Project 2 on
+ Project 1. [ A related thought: IMO it would not be entirely
+ unreasonable to require timer_sleep() and priority scheduling sans
+ donation from Project 1 working for subsequent projects. ]
* VM project:
- - Discuss the perils of mixing dirty bits between kernel and user virtual
- memory.
+ - Godmar: Get rid of mmap syscall, add sbrk.
- - Sample solution.
+ - Godmar: page-linear, page-shuffle VM tests do not use enough
+ memory to force eviction. Should increase memory consumption.
- - Update grading/vm to reflect new mmap, munmap forms.
+ - Godmar: fix the page* tests to require swapping
-* Filesys project:
+ - Godmar: make sure the filesystem fails if not properly
+ concurrency-protected in project 3.
- - Increase maximum disk size from 8 MB to something that actually
- requires doubly indirect nodes. There is a negative pressure here
- from the bitmap object--perhaps we need a specialized bitmap that
- doesn't have to be all in-memory at once.
+ - Godmar: Another area in which tests could be created are for
+ project 3: tests that combine mmap with a paging workload to see
+ their kernel pages properly while mmapping pages - I don't think
+ the current tests test that, do they?
- Alternatively, shrink the inode size.
-
- - Add mkdir and ls example user programs.
-
- - Add option to disable buffer cache.
-
- - Get rid of "dump" commands--they're not really useful.
-
- - Sample solution.
+* Filesys project:
- Need a better way to measure performance improvement of buffer
cache. Some students reported that their system was slower with
cache--likely, Bochs doesn't simulate a disk with a realistic
speed.
- - Clarify effect of remove(cwd).
+ (Perhaps we should count disk reads and writes, not time.)
+
+ - Need lots more tests.
+
+ - Detect implementations that represent the cwd as a string, by
+ removing a directory that is the cwd of another process, then
+ creating a new directory of the same name and putting some files
+ in it, then checking whether the process that had it as cwd sees
+ them.
+
+ - dir-rm-cwd should have a related test that uses a separate process
+ to try to pin the directory as its cwd.
+
+ - Godmar: I'm not sure if I mentioned that already, but I passed all
+ tests for the filesys project without having implemented inode
+ deallocation. A test is needed that checks that blocks are
+ reclaimed when files are deleted.
+
+ - Godmar: I'm in the middle of project 4, I've started by
+ implementing a buffer cache and plugging it into the existing
+ filesystem. Along the way I was wondering how we could test the
+ cache.
+
+ Maybe one could adopt a similar testing strategy as in project 1
+ for the MLQFS scheduler: add a function that reads
+ "get_cache_accesses()" and a function "get_cache_hits()". Then
+ create a version of pintos that creates access traces for a
+ to-be-determined workload. Run an off-line analysis that would
+ determine how many hits a perfect cache would have (MAX), and how
+ much say an LRU strategy would give (MIN). Then add a fudge
+ factor to account for different index strategies and test that the
+ reported number of cache hits/accesses is within (MIN, MAX) +/-
+ fudge factor.
+
+ (As an aside - I am curious why you chose to use a clock-style
+ algorithm rather than the more straightforward LRU for your buffer
+ cache implementation in your sample solution. Is there a reason
+ for that? I was curious to see if it made a difference, so I
+ implemented LRU for your cache implementation and ran the test
+ workload of project 4 and printed cache hits/accesses. I found
+ that for that workload, the clock-based algorithm performs almost
+ identical to LRU (within about 1%, but I ran nondeterministally
+ with QEMU). I then reduced the cache size to 32 blocks and found
+ again the same performance, which raises the suspicion that the
+ test workload might not force any cache replacement, so the
+ eviction strategy doesn't matter.)
+
+ - Godmar: I haven't analyzed the tests for project 4 yet, but I'm
+ wondering if the fairness requirements your specification has for
+ readers/writers are covered in the tests or not.
-* Documentation:
- - Finish writing tour.
+* Documentation:
- Add "Digging Deeper" sections that describe the nitty-gritty x86
details for the benefit of those interested.
- Add explanations of what "real" OSes do to give students some
perspective.
-* Assignments:
+* To add partition support:
+
+ - Find four partition types that are more or less unused and choose
+ to use them for Pintos. (This is implemented.)
+
+ - Bootloader reads partition tables of all BIOS devices to find the
+ first that has the "Pintos kernel" partition type. (This is
+ implemented.) Ideally the bootloader would make sure there is
+ exactly one such partition, but I didn't implement that yet.
+
+ - Bootloader reads kernel into memory at 1 MB using BIOS calls.
+ (This is implemented.)
+
+ - Kernel arguments have to go into a separate sector because the
+ bootloader is otherwise too big to fit now? (I don't recall if I
+ did anything about this.)
- - Add extra credit:
+ - Kernel at boot also scans partition tables of all the disks it can
+ find to find the ones with the four Pintos partition types
+ (perhaps not all exist). After that, it makes them available to
+ the rest of the kernel (and doesn't allow access to other devices,
+ for safety).
- . Low-level x86 stuff, like paged page tables.
+ - "pintos" and "pintos-mkdisk" need to write a partition table to
+ the disks that they create. "pintos-mkdisk" will need to take a
+ new parameter specifying the type. (I might have partially
+ implemented this, don't remember.)
- . Specifics on how to implement sbrk, malloc.
+ - "pintos" should insist on finding a partition header on disks
+ handed to it, for safety.
- . Other good ideas.
+ - Need some way for "pintos" to assemble multiple disks or
+ partitions into a single image that can be copied directly to a
+ USB block device. (I don't know whether I came up with a good
+ solution yet or not, or whether I implemented any of it.)
- . opendir/readdir/closedir
+* To add USB support:
- . everything needed for getcwd()
+ - Needs to be able to scan PCI bus for UHCI controller. (I
+ implemented this partially.)
- - Add src/testcases/vm, src/testcases/filesys and make it clear to use
- them?
+ - May want to be able to initialize USB controllers over CardBus
+ bridges. I don't know whether this requires additional work or
+ if it's useful enough to warrant extra work. (It's of special
+ interest for me because I have a laptop that only has USB via
+ CardBus.)
-* Tests:
+ - There are many protocol layers involved: SCSI over USB-Mass
+ Storage over USB over UHCI over PCI. (I may be forgetting one.)
+ I don't know yet whether it's best to separate the layers or to
+ merge (some of) them. I think that a simple and clean
+ organization should be a priority.
- - Release some of them.
+ - VMware can likely be used for testing because it can expose host
+ USB devices as guest USB devices. This is safer and more
+ convenient than using real hardware for testing.
- - The threads, userprog, vm test source files could use
- factorization and cleanup along the lines of fslib in the filesys
- tests.
+ - Should test with a variety of USB keychain devices because there
+ seems to be wide variation among them, especially in the SCSI
+ protocols they support. Should try to use a "lowest-common
+ denominator" SCSI protocol if any such thing really exists.
- - The p1-4.c testcase needs significant tuning. Currently it takes
- too long (especially when SHOW_PROGRESS is turned on) and doesn't
- show significant improvement.
+ - Might want to add a feature whereby kernel arguments can be
+ given interactively, rather than passed on-disk. Needs some
+ though.
-* Code:
+==========================================================================
+============================== COMPLETED TASKS ===========================
+==========================================================================
- - Rewrite quick_sort() to use heap sort, for O(1) stack usage.
+* Godmar: Introduce memory leak robustness tests - both for the
+ well-behaved as well as the mis-behaved case - that tests that the
+ kernel handles low-mem conditions well.
- - Make printf() test actually check its results.
+ - handled by new multi-oom.
- - Make threads test use a program and arguments like the other
- projects.
+* Godmar: improved priority inheritance tests (see priority-donate-chain)
- - Revise command-line arguments for sensibility instead of for
- Nachos compatibility.