-----------------------
The requirements and procedure for building, installing, and
-configuring Open vSwitch are the same as those given in INSTALL.Linux.
+configuring Open vSwitch are the same as those given in INSTALL.
You may omit configuring, building, and installing the kernel module,
and the related requirements.
then create /dev/net (if necessary) with "mkdir /dev/net", then create
/dev/net/tun with "mknod /dev/net/tun c 10 200".
+On FreeBSD, the userspace switch additionally requires the kernel
+tap(4) driver to be available, either built into the kernel or loaded
+as a module.
+
Using the Userspace Datapath with ovs-vswitchd
----------------------------------------------
-To use ovs-vswitchd in userspace mode, give the bridge a name that
-begins with "netdev:" in the configuration file. For example:
+To use ovs-vswitchd in userspace mode, create a bridge with datapath_type
+"netdev" in the configuration database. For example:
- bridge.netdev:br0.port=eth0
- bridge.netdev:br0.port=eth1
- bridge.netdev:br0.port=eth2
+ ovs-vsctl add-br br0
+ ovs-vsctl set bridge br0 datapath_type=netdev
+ ovs-vsctl add-port br0 eth0
+ ovs-vsctl add-port br0 eth1
+ ovs-vsctl add-port br0 eth2
ovs-vswitchd will create a TAP device as the bridge's local interface,
-named the same as the bridge minus the "netdev:" prefix, as well as
-for each configured internal interface.
-
-Using the Userspace Datapath with ovs-openflowd
------------------------------------------------
+named the same as the bridge, as well as for each configured internal
+interface.
-To use ovs-openflowd in userspace mode, specify a datapath name that
-begins with "netdev:", and specify --ports with the names of the ports
-that should be included in the datapath as argument. For example:
+Firewall Rules
+--------------
- ovs-openflowd netdev:br0 --ports=eth0,eth1,eth2
+On Linux, when a physical interface is in use by the userspace
+datapath, packets received on the interface still also pass into the
+kernel TCP/IP stack. This can cause surprising and incorrect
+behavior. You can use "iptables" to avoid this behavior, by using it
+to drop received packets. For example, to drop packets received on
+eth0:
-ovs-openflowd will create a TAP device as the bridge's local
-interface, named the same as the bridge minus the "netdev:" prefix.
+ iptables -A INPUT -i eth0 -j DROP
+ iptables -A FORWARD -i eth0 -j DROP
Bug Reporting
-------------