gre: Add kernel GRE support.

[openvswitch] / xenserver / vswitch-xen.spec

diff --git a/xenserver/vswitch-xen.spec b/xenserver/vswitch-xen.spec
index 886834f507a622c9e554760a65c38398429a8715..a0899edd18f1508c3d07d5ff782cbb61b9d860c5 100644 (file)
--- a/xenserver/vswitch-xen.spec
+++ b/xenserver/vswitch-xen.spec
@@ -14,7 +14,6 @@
 #    rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
 #
 %define version %{vswitch_version}-%{xen_version}
 #    rpmbuild -D "vswitch_version 0.8.9~1+build123" -D "xen_version 2.6.18-128.1.1.el5.xs5.1.0.483.1000xen" -D "build_number --with-build-number=123" -bb /usr/src/redhat/SPECS/vswitch-xen.spec
 #
 %define version %{vswitch_version}-%{xen_version}

-%define _prefix /root/vswitch

 
 Name: vswitch
 Summary: Virtual switch
 
 Name: vswitch
 Summary: Virtual switch


@@ -45,12 +44,12 @@ traffic.
 %setup -q -n openvswitch-%{vswitch_version}
 
 %build
 %setup -q -n openvswitch-%{vswitch_version}
 
 %build

-./configure --prefix=%{_prefix} --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}
+./configure --prefix=/usr --sysconfdir=/etc --localstatedir=%{_localstatedir} --with-l26=/lib/modules/%{xen_version}/build --enable-ssl %{build_number}

 make %{_smp_mflags}
 
 %install
 rm -rf $RPM_BUILD_ROOT
 make %{_smp_mflags}
 
 %install
 rm -rf $RPM_BUILD_ROOT

-make install DESTDIR=$RPM_BUILD_ROOT prefix=%{_prefix}
+make install DESTDIR=$RPM_BUILD_ROOT

 install -d -m 755 $RPM_BUILD_ROOT/etc
 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
 install -m 755 xenserver/etc_init.d_vswitch \
 install -d -m 755 $RPM_BUILD_ROOT/etc
 install -d -m 755 $RPM_BUILD_ROOT/etc/init.d
 install -m 755 xenserver/etc_init.d_vswitch \


@@ -67,49 +66,52 @@ install -m 755 xenserver/etc_profile.d_vswitch.sh \
 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
          $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update
 install -d -m 755 $RPM_BUILD_ROOT/etc/xapi.d/plugins
 install -m 755 xenserver/etc_xapi.d_plugins_vswitch-cfg-update \
          $RPM_BUILD_ROOT/etc/xapi.d/plugins/vswitch-cfg-update

-install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/scripts
+install -d -m 755 $RPM_BUILD_ROOT/usr/share/vswitch/scripts

 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \
 install -m 755 xenserver/opt_xensource_libexec_interface-reconfigure \

-             $RPM_BUILD_ROOT%{_prefix}/scripts/interface-reconfigure
+             $RPM_BUILD_ROOT/usr/share/vswitch/scripts/interface-reconfigure

 install -m 755 xenserver/etc_xensource_scripts_vif \
 install -m 755 xenserver/etc_xensource_scripts_vif \

-             $RPM_BUILD_ROOT%{_prefix}/scripts/vif
-install -m 755 xenserver/root_vswitch_scripts_dump-vif-details \
-               $RPM_BUILD_ROOT%{_prefix}/scripts/dump-vif-details
+             $RPM_BUILD_ROOT/usr/share/vswitch/scripts/vif
+install -m 755 xenserver/usr_share_vswitch_scripts_dump-vif-details \
+               $RPM_BUILD_ROOT/usr/share/vswitch/scripts/dump-vif-details
+install -m 755 xenserver/usr_share_vswitch_scripts_refresh-xs-network-uuids \
+               $RPM_BUILD_ROOT/usr/share/vswitch/scripts/refresh-xs-network-uuids

 install -m 755 xenserver/usr_sbin_xen-bugtool \
 install -m 755 xenserver/usr_sbin_xen-bugtool \

-             $RPM_BUILD_ROOT%{_prefix}/scripts/xen-bugtool
+             $RPM_BUILD_ROOT/usr/share/vswitch/scripts/xen-bugtool

 install -m 755 xenserver/usr_sbin_brctl \
 install -m 755 xenserver/usr_sbin_brctl \

-             $RPM_BUILD_ROOT%{_prefix}/scripts/brctl
-install -m 755 xenserver/root_vswitch_scripts_sysconfig.template \
-         $RPM_BUILD_ROOT/root/vswitch/scripts/sysconfig.template
+             $RPM_BUILD_ROOT/usr/share/vswitch/scripts/brctl
+install -m 755 xenserver/usr_share_vswitch_scripts_sysconfig.template \
+         $RPM_BUILD_ROOT/usr/share/vswitch/scripts/sysconfig.template

 install -m 644 \
         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \
 install -m 644 \
         xenserver/usr_lib_xsconsole_plugins-base_XSFeatureVSwitch.py \

-               $RPM_BUILD_ROOT%{_prefix}/scripts/XSFeatureVSwitch.py
+               $RPM_BUILD_ROOT/usr/share/vswitch/scripts/XSFeatureVSwitch.py

 
 

-install -d -m 755 $RPM_BUILD_ROOT%{_prefix}/kernel_modules
-find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT%{_prefix}/kernel_modules/ \;
+install -d -m 755 $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch
+find datapath/linux-2.6 -name *.ko -exec install -m 755  \{\} $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch \;

 
 # Get rid of stuff we don't want to make RPM happy.
 
 # Get rid of stuff we don't want to make RPM happy.

-rm -rf \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ezio-term \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-controller \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-discover \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-kill \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-openflowd \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-pki \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-switchui \
-    $RPM_BUILD_ROOT/root/vswitch/bin/ovs-wdt \
-    $RPM_BUILD_ROOT/root/vswitch/kernel_modules/veth_mod.ko \
-    $RPM_BUILD_ROOT/root/vswitch/sbin/ovs-monitor \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-controller.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-discover.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-kill.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-openflowd.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/man/man8/ovs-pki.8 \
-    $RPM_BUILD_ROOT/root/vswitch/share/openvswitch
+rm \
+    $RPM_BUILD_ROOT/usr/bin/ovs-controller \
+    $RPM_BUILD_ROOT/usr/bin/ovs-discover \
+    $RPM_BUILD_ROOT/usr/bin/ovs-kill \
+    $RPM_BUILD_ROOT/usr/bin/ovs-openflowd \
+    $RPM_BUILD_ROOT/usr/bin/ovs-pki \
+    $RPM_BUILD_ROOT/usr/bin/ovs-wdt \
+    $RPM_BUILD_ROOT/usr/sbin/ovs-monitor \
+    $RPM_BUILD_ROOT/usr/share/man/man8/ovs-controller.8 \
+    $RPM_BUILD_ROOT/usr/share/man/man8/ovs-discover.8 \
+    $RPM_BUILD_ROOT/usr/share/man/man8/ovs-kill.8 \
+    $RPM_BUILD_ROOT/usr/share/man/man8/ovs-openflowd.8 \
+    $RPM_BUILD_ROOT/usr/share/man/man8/ovs-pki.8
+rm -f $RPM_BUILD_ROOT/lib/modules/%{xen_version}/kernel/net/vswitch/veth_mod.ko
+rm -r \
+    $RPM_BUILD_ROOT/usr/share/openvswitch/commands
+
+install -d -m 755 $RPM_BUILD_ROOT/var/lib/openvswitch

 
 %clean
 rm -rf $RPM_BUILD_ROOT
 
 
 %clean
 rm -rf $RPM_BUILD_ROOT
 

-%pre
+%post

 if [ ! -f /etc/xensource-inventory ]; then
     printf "XenSource inventory not present in /etc/xensource-inventory"
     exit 1
 if [ ! -f /etc/xensource-inventory ]; then
     printf "XenSource inventory not present in /etc/xensource-inventory"
     exit 1


@@ -146,7 +148,7 @@ EOF
     fi
 fi
 
     fi
 fi
 

-if test ! -e /etc/ovs-vswitch.dbcache; then
+if test ! -e /var/lib/openvswitch/dbcache; then

     if test "$1" = 1; then
         printf "Creating xapi database cache...  "
     else
     if test "$1" = 1; then
         printf "Creating xapi database cache...  "
     else


@@ -155,34 +157,7 @@ if test ! -e /etc/ovs-vswitch.dbcache; then
         printf "Re-creating xapi database cache...  "
     fi
 
         printf "Re-creating xapi database cache...  "
     fi
 

-    source /etc/xensource-inventory
-    if python - "$INSTALLATION_UUID" <<EOF
-import XenAPI
-import pickle
-import sys
-
-session = XenAPI.xapi_local()
-try:
-    session.xenapi.login_with_password("root", "")
-
-    vlans = session.xenapi.VLAN.get_all_records()
-    bonds = session.xenapi.Bond.get_all_records()
-    pifs = session.xenapi.PIF.get_all_records()
-    networks = session.xenapi.network.get_all_records()
-    host = session.xenapi.host.get_by_uuid(sys.argv[1])
-finally:
-    session.xenapi.session.logout()
-
-dbcache_file = "/etc/ovs-vswitch.dbcache"
-f = open(dbcache_file, 'w')
-pickle.dump({'vlans': vlans,
-             'bonds': bonds,
-             'pifs': pifs,
-             'networks': networks}, f)
-pickle.dump({'host': host}, f)
-f.close()
-EOF
-    then
+    if /usr/share/vswitch/scripts/interface-reconfigure rewrite; then

         printf "done.\n"
     else
         printf "FAILED\n"
         printf "done.\n"
     else
         printf "FAILED\n"


@@ -193,7 +168,9 @@ EOF
     fi
 fi
 
     fi
 fi
 

-%post
+# Ensure that modprobe will find our modules.
+depmod %{xen_version}
+

 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
     cat >>/etc/sysctl.conf <<EOF
 # This works around an issue in xhad, which binds to a particular
 if grep -F net.ipv4.conf.all.arp_filter /etc/sysctl.conf >/dev/null 2>&1; then :; else
     cat >>/etc/sysctl.conf <<EOF
 # This works around an issue in xhad, which binds to a particular


@@ -214,7 +191,7 @@ touch /etc/ovs-vswitchd.conf
 
 # Create default or update existing /etc/sysconfig/vswitch.
 SYSCONFIG=/etc/sysconfig/vswitch
 
 # Create default or update existing /etc/sysconfig/vswitch.
 SYSCONFIG=/etc/sysconfig/vswitch

-TEMPLATE=/root/vswitch/scripts/sysconfig.template
+TEMPLATE=/usr/share/vswitch/scripts/sysconfig.template

 if [ ! -e $SYSCONFIG ]; then
     cp $TEMPLATE $SYSCONFIG
 else
 if [ ! -e $SYSCONFIG ]; then
     cp $TEMPLATE $SYSCONFIG
 else


@@ -228,7 +205,7 @@ else
 fi
 
 # Replace XenServer files by our versions.
 fi
 
 # Replace XenServer files by our versions.

-mkdir -p %{_prefix}/xs-original \
+mkdir -p /usr/lib/vswitch/xs-original \

     || printf "Could not create script backup directory.\n"
 for f in \
     /opt/xensource/libexec/interface-reconfigure \
     || printf "Could not create script backup directory.\n"
 for f in \
     /opt/xensource/libexec/interface-reconfigure \


@@ -238,19 +215,19 @@ for f in \
 do
     s=$(basename "$f")
     t=$(readlink "$f")
 do
     s=$(basename "$f")
     t=$(readlink "$f")

-    if [ "$t" != "%{_prefix}/scripts/$s" ]; then
-        mv "$f" %{_prefix}/xs-original/ \
+    if [ "$t" != "/usr/share/vswitch/scripts/$s" ]; then
+        mv "$f" /usr/lib/vswitch/xs-original/ \

             || printf "Could not save original XenServer $s script\n"
             || printf "Could not save original XenServer $s script\n"

-        ln -s "%{_prefix}/scripts/$s" "$f" \
+        ln -s "/usr/share/vswitch/scripts/$s" "$f" \

             || printf "Could not link to vSwitch $s script\n"
     fi
 done
 
 # Install xsconsole plugin
 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)
             || printf "Could not link to vSwitch $s script\n"
     fi
 done
 
 # Install xsconsole plugin
 plugin=$(readlink /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py)

-if [ "$plugin" != "/root/vswitch/scripts/XSFeatureVSwitch.py" ]; then
+if [ "$plugin" != "/usr/share/vswitch/scripts/XSFeatureVSwitch.py" ]; then

     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py
     rm -f /usr/lib/xsconsole/plugins-base/XSFeatureVSwitch.py

-    ln -s /root/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"
+    ln -s /usr/share/vswitch/scripts/XSFeatureVSwitch.py /usr/lib/xsconsole/plugins-base/ || printf "Could not link to vSswitch xsconsole plugin.\n"

 fi
 
 # Ensure all required services are set to run
 fi
 
 # Ensure all required services are set to run


@@ -296,23 +273,21 @@ if [ "$1" = "0" ]; then     # $1 = 1 for upgrade
         /usr/sbin/brctl
     do
         s=$(basename "$f")
         /usr/sbin/brctl
     do
         s=$(basename "$f")

-        if [ ! -f "%{_prefix}/xs-original/$s" ]; then
-            printf "Original XenServer $s script not present in %{_prefix}/xs-original\n"
+        if [ ! -f "/usr/lib/vswitch/xs-original/$s" ]; then
+            printf "Original XenServer $s script not present in /usr/lib/vswitch/xs-original\n"

             printf "Could not restore original XenServer script.\n"
         else
             (rm -f "$f" \
             printf "Could not restore original XenServer script.\n"
         else
             (rm -f "$f" \

-                && mv "%{_prefix}/xs-original/$s" "$f") \
+                && mv "/usr/lib/vswitch/xs-original/$s" "$f") \

                 || printf "Could not restore original XenServer $s script.\n"
         fi
     done
 
                 || printf "Could not restore original XenServer $s script.\n"
         fi
     done
 

-    find  %{_prefix} -type d -depth -exec rmdir \{\} \; \
-        || printf "Could not remove vSwitch install directory.\n"
-

     # Remove all configuration files
     rm -f /etc/ovs-vswitchd.conf
     rm -f /etc/sysconfig/vswitch
     rm -f /etc/ovs-vswitchd.cacert
     # Remove all configuration files
     rm -f /etc/ovs-vswitchd.conf
     rm -f /etc/sysconfig/vswitch
     rm -f /etc/ovs-vswitchd.cacert

+    rm -f /var/lib/openvswitch/dbcache

 
     printf "\nYou MUST reboot the server now to complete the change to\n"
     printf "standard Xen networking.  Attempts to modify networking on the\n"
 
     printf "\nYou MUST reboot the server now to complete the change to\n"
     printf "standard Xen networking.  Attempts to modify networking on the\n"


@@ -328,32 +303,42 @@ fi
 /etc/xapi.d/plugins/vswitch-cfg-update
 /etc/logrotate.d/vswitch
 /etc/profile.d/vswitch.sh
 /etc/xapi.d/plugins/vswitch-cfg-update
 /etc/logrotate.d/vswitch
 /etc/profile.d/vswitch.sh

-/root/vswitch/kernel_modules/brcompat_mod.ko
-/root/vswitch/kernel_modules/openvswitch_mod.ko
-/root/vswitch/scripts/dump-vif-details
-/root/vswitch/scripts/interface-reconfigure
-/root/vswitch/scripts/vif
-/root/vswitch/scripts/xen-bugtool
-/root/vswitch/scripts/XSFeatureVSwitch.py
-/root/vswitch/scripts/brctl
-/root/vswitch/scripts/sysconfig.template
+/lib/modules/%{xen_version}/kernel/net/vswitch/openvswitch_mod.ko
+/lib/modules/%{xen_version}/kernel/net/vswitch/brcompat_mod.ko
+%if %(echo '%{xen_version}'|awk -F"." '{if ($3>=18) print 1; else print 0;}')
+/lib/modules/%{xen_version}/kernel/net/vswitch/ip_gre_mod.ko
+%endif
+/usr/share/vswitch/scripts/dump-vif-details
+/usr/share/vswitch/scripts/refresh-xs-network-uuids
+/usr/share/vswitch/scripts/interface-reconfigure
+/usr/share/vswitch/scripts/vif
+/usr/share/vswitch/scripts/xen-bugtool
+/usr/share/vswitch/scripts/XSFeatureVSwitch.py
+/usr/share/vswitch/scripts/brctl
+/usr/share/vswitch/scripts/sysconfig.template

 # Following two files are generated automatically by rpm.  We don't
 # really need them and they won't be used on the XenServer, but there
 # isn't an obvious place to get rid of them since they are generated
 # after the install script runs.  Since they are small, we just
 # include them.
 # Following two files are generated automatically by rpm.  We don't
 # really need them and they won't be used on the XenServer, but there
 # isn't an obvious place to get rid of them since they are generated
 # after the install script runs.  Since they are small, we just
 # include them.

-/root/vswitch/scripts/XSFeatureVSwitch.pyc
-/root/vswitch/scripts/XSFeatureVSwitch.pyo
-/root/vswitch/sbin/ovs-brcompatd
-/root/vswitch/sbin/ovs-vswitchd
-/root/vswitch/bin/ovs-appctl
-/root/vswitch/bin/ovs-cfg-mod
-/root/vswitch/bin/ovs-dpctl
-/root/vswitch/bin/ovs-ofctl
-/root/vswitch/share/man/man5/ovs-vswitchd.conf.5
-/root/vswitch/share/man/man8/ovs-appctl.8
-/root/vswitch/share/man/man8/ovs-brcompatd.8
-/root/vswitch/share/man/man8/ovs-cfg-mod.8
-/root/vswitch/share/man/man8/ovs-dpctl.8
-/root/vswitch/share/man/man8/ovs-ofctl.8
-/root/vswitch/share/man/man8/ovs-vswitchd.8
+/usr/share/vswitch/scripts/XSFeatureVSwitch.pyc
+/usr/share/vswitch/scripts/XSFeatureVSwitch.pyo
+/usr/sbin/ovs-brcompatd
+/usr/sbin/ovs-vswitchd
+/usr/sbin/ovsdb-server
+/usr/bin/ovs-appctl
+/usr/bin/ovs-dpctl
+/usr/bin/ovs-ofctl
+/usr/bin/ovs-vsctl
+/usr/bin/ovsdb-client
+/usr/bin/ovsdb-tool
+/usr/share/man/man1/ovsdb-client.1.gz
+/usr/share/man/man1/ovsdb-server.1.gz
+/usr/share/man/man1/ovsdb-tool.1.gz
+/usr/share/man/man8/ovs-appctl.8.gz
+/usr/share/man/man8/ovs-brcompatd.8.gz
+/usr/share/man/man8/ovs-dpctl.8.gz
+/usr/share/man/man8/ovs-ofctl.8.gz
+/usr/share/man/man8/ovs-vsctl.8.gz
+/usr/share/man/man8/ovs-vswitchd.8.gz
+/var/lib/openvswitch