+ <p>If it is specified, this setting must be one of the following
+ strings that describes how Open vSwitch contacts this OpenFlow
+ controller over the network:</p>
+
+ <dl>
+ <dt><code>in-band</code></dt>
+ <dd>In this mode, this controller's OpenFlow traffic travels over the
+ bridge associated with the controller. With this setting, Open
+ vSwitch allows traffic to and from the controller regardless of the
+ contents of the OpenFlow flow table. (Otherwise, Open vSwitch
+ would never be able to connect to the controller, because it did
+ not have a flow to enable it.) This is the most common connection
+ mode because it is not necessary to maintain two independent
+ networks.</dd>
+ <dt><code>out-of-band</code></dt>
+ <dd>In this mode, OpenFlow traffic uses a control network separate
+ from the bridge associated with this controller, that is, the
+ bridge does not use any of its own network devices to communicate
+ with the controller. The control network must be configured
+ separately, before or after <code>ovs-vswitchd</code> is started.
+ </dd>
+ </dl>
+
+ <p>If not specified, the default is implementation-specific. If
+ <ref column="target"/> is <code>discover</code>, the connection mode
+ is always treated as <code>in-band</code> regardless of the actual
+ setting.</p>