ovs-brcompatd: Delete Bridge record when deleting a bridge.

[openvswitch] / vswitchd / ovs-vswitchd.8.in

diff --git a/vswitchd/ovs-vswitchd.8.in b/vswitchd/ovs-vswitchd.8.in
index 28e55ba31ca4365dc2d40c5a0d5b7873f5163200..71115f9b1a8e981bad7ff894b9efbce792738fa7 100644 (file)
--- a/vswitchd/ovs-vswitchd.8.in
+++ b/vswitchd/ovs-vswitchd.8.in
@@ -1,29 +1,39 @@
-.TH ovs\-vswitchd 8 "March 2009" "Open vSwitch" "OpenVSwitch Manual"
+.\" -*- nroff -*-
+.de IQ
+.  br
+.  ns
+.  IP "\\$1"
+..
+.TH ovs\-vswitchd 8 "June 2009" "Open vSwitch" "Open vSwitch Manual"

 .ds PN ovs\-vswitchd
 .
 .SH NAME
 .ds PN ovs\-vswitchd
 .
 .SH NAME

-ovs\-vswitchd \- virtual switch daemon
+ovs\-vswitchd \- Open vSwitch daemon

 .
 .SH SYNOPSIS
 .B ovs\-vswitchd
 .
 .SH SYNOPSIS
 .B ovs\-vswitchd

-\fIconfig\fR
+\fIdatabase\fR

 .
 .SH DESCRIPTION
 .
 .SH DESCRIPTION

-A daemon that manages and controls any number of virtual switches on
-the local machine.
+A daemon that manages and controls any number of Open vSwitch switches 
+on the local machine.

 .PP
 .PP

-The mandatory \fIconfig\fR argument specifies a configuration file.
-For a description of \fBovs\-vswitchd\fR configuration syntax, see
-\fBovs\-vswitchd.conf\fR(5).
+The mandatory \fIdatabase\fR argument specifies the
+\fBovsdb\-server\fR from which \fBovs\-vswitchd\fR's configuration
+should be retrieved.  It takes one of the following forms:
+.so ovsdb/remote-active.man

 .PP
 .PP

-At startup or upon receipt of a \fBSIGHUP\fR signal, \fBovs\-vswitchd\fR
-reads the configuration file.  It sets up Open vSwitch datapaths and then 
-operates switching across each bridge described in its configuration 
-files.  If a logfile was specified on the command line it will also 
-be opened or reopened.
+\fBovs\-vswitchd\fR retrieves its configuration from \fIdatabase\fR at
+startup.  It sets up Open vSwitch datapaths and then operates
+switching across each bridge described in its configuration files.  As
+the database changes, \fBovs\-vswitchd\fR automatically updates its
+configuration to match.

 .PP
 .PP

-\fBovs\-vswitchd\fR virtual switches may be configured with any of the
-following features:
+Upon receipt of a SIGHUP signal, \fBovs\-vswitchd\fR reopens its log
+file, if one was specified on the command line.
+.PP
+\fBovs\-vswitchd\fR switches may be configured with any of the following 
+features:

 .
 .IP \(bu
 L2 switching with MAC learning.
 .
 .IP \(bu
 L2 switching with MAC learning.


@@ -42,21 +52,24 @@ Port mirroring, with optional VLAN tagging.
 NetFlow v5 flow logging.
 .
 .IP \(bu
 NetFlow v5 flow logging.
 .
 .IP \(bu

+sFlow(R) monitoring.
+.
+.IP \(bu

 Connectivity to an external OpenFlow controller, such as NOX.
 .
 .PP
 Only a single instance of \fBovs\-vswitchd\fR is intended to run at a time.
 Connectivity to an external OpenFlow controller, such as NOX.
 .
 .PP
 Only a single instance of \fBovs\-vswitchd\fR is intended to run at a time.

-A single \fBovs\-vswitchd\fR can manage any number of virtual switches, up
+A single \fBovs\-vswitchd\fR can manage any number of switch instances, up

 to the maximum number of supported Open vSwitch datapaths.
 .PP
 to the maximum number of supported Open vSwitch datapaths.
 .PP

-\fBovs\-vswitchd\fR does all the necessary management of OpenVSwitch datapaths
+\fBovs\-vswitchd\fR does all the necessary management of Open vSwitch datapaths

 itself.  Thus, external tools, such \fBovs\-dpctl\fR(8), are not needed for
 managing datapaths in conjunction with \fBovs\-vswitchd\fR, and their use
 to modify datapaths when \fBovs\-vswitchd\fR is running can interfere with
 its operation.  (\fBovs\-dpctl\fR may still be useful for diagnostics.)
 .PP
 An Open vSwitch datapath kernel module must be loaded for \fBovs\-vswitchd\fR
 itself.  Thus, external tools, such \fBovs\-dpctl\fR(8), are not needed for
 managing datapaths in conjunction with \fBovs\-vswitchd\fR, and their use
 to modify datapaths when \fBovs\-vswitchd\fR is running can interfere with
 its operation.  (\fBovs\-dpctl\fR may still be useful for diagnostics.)
 .PP
 An Open vSwitch datapath kernel module must be loaded for \fBovs\-vswitchd\fR

-to be useful.  Please refer to the \fBINSTALL\fR file included in the
+to be useful.  Please refer to the \fBINSTALL.Linux\fR file included in the

 Open vSwitch distribution for instructions on how to build and load
 the Open vSwitch kernel module.
 .PP
 Open vSwitch distribution for instructions on how to build and load
 the Open vSwitch kernel module.
 .PP


@@ -69,19 +82,78 @@ actually in use.  It requires the \fBbrcompat_mod.ko\fR kernel module
 to be loaded.
 .
 .so lib/daemon.man
 to be loaded.
 .
 .so lib/daemon.man

+.so lib/ssl.man
+.so lib/ssl-bootstrap.man

 .so lib/vlog.man
 .so lib/common.man
 .so lib/leak-checker.man
 .
 .so lib/vlog.man
 .so lib/common.man
 .so lib/leak-checker.man
 .

-.SH "BUGS"
+.SH "RUNTIME MANAGEMENT COMMANDS"
+\fBovs\-appctl\fR(8) can send commands to a running
+\fBovs\-vswitchd\fR process.  The currently supported commands are
+described below.  The command descriptions assume an understanding of
+how to configure Open vSwitch.
+.SS "BRIDGE COMMANDS"
+These commands manage bridges.
+.IP "\fBfdb/show\fR \fIbridge\fR"
+Lists each MAC address/VLAN pair learned by the specified \fIbridge\fR,
+along with the port on which it was learned and the age of the entry,
+in seconds.

 .
 .

-Only Open vSwitch kernel-based datapaths are currently supported.  In the
-future, this restriction may be lifted.
-.PP
-Only Linux 2.6.\fIx\fR is currently supported.
+.IP "\fBbridge/dump-flows\fR \fIbridge\fR"
+Lists all flows in \fIbridge\fR, including those normally hidden to
+commands such as \fBovs-ofctl dump-flows\fR.  Flows set up by mechanisms
+such as in-band control and fail-open are hidden from the controller
+since it is not allowed to modify or override them.
+.SS "BOND COMMANDS"
+These commands manage bonded ports on an Open vSwitch's bridges.  To
+understand some of these commands, it is important to understand a
+detail of the bonding implementation called ``MAC hashing.''  Instead
+of directly assigning Ethernet source addresses to slaves, the bonding
+implementation computes a function that maps an 48-bit Ethernet source
+addresses into an 8-bit value (a ``MAC hash'' value).  All of the
+Ethernet addresses that map to a single 8-bit value are then assigned
+to a single slave.
+.IP "\fBbond/list\fR"
+Lists all of the bonds, and their slaves, on each bridge.
+.
+.IP "\fBbond/show\fR \fIport\fR"
+Lists all of the bond-specific information about the given bonded
+\fIport\fR: updelay, downdelay, time until the next rebalance.  Also
+lists information about each slave: whether it is enabled or disabled,
+the time to completion of an updelay or downdelay if one is in
+progress, whether it is the active slave, the MAC hashes assigned to
+the slave, and the MAC learning table entries that hash to each MAC.
+.IP "\fBbond/migrate\fR \fIport\fR \fIhash\fR \fIslave\fR"
+Assigns a given MAC hash to a new slave.  \fIport\fR specifies the
+bond port, \fIhash\fR either the MAC hash to be migrated (as a decimal
+number between 0 and 255) or an Ethernet address to be hashed, and
+\fIslave\fR the new slave to be assigned.
+.IP
+The reassignment is not permanent: rebalancing or fail-over will
+cause the MAC hash to be shifted to a new slave in the usual
+manner.
+.IP
+A MAC hash cannot be migrated to a disabled slave.
+.IP "\fBbond/set-active-slave\fR \fIport\fR \fIslave\fR"
+Sets \fIslave\fR as the active slave on \fIport\fR.  \fIslave\fR must
+currently be enabled.
+.IP
+The setting is not permanent: a new active slave will be selected
+if \fIslave\fR becomes disabled.
+.IP "\fBbond/enable-slave\fR \fIport\fR \fIslave\fR"
+.IQ "\fBbond/disable-slave\fR \fIport\fR \fIslave\fR"
+Enables (or disables) \fIslave\fR on the given bond \fIport\fR, skipping any
+updelay (or downdelay).
+.IP
+This setting is not permanent: it persists only until the carrier
+status of \fIslave\fR changes.
+.IP "\fBbond/hash\fR \fImac\fR"
+Returns the hash value which would be used for \fImac\fR.

 .
 .

+.so lib/vlog-unixctl.man

 .SH "SEE ALSO"
 .BR ovs\-appctl (8),
 .SH "SEE ALSO"
 .BR ovs\-appctl (8),

-.BR ovs\-vswitchd.conf (5),

 .BR ovs\-brcompatd (8),
 .BR ovs\-brcompatd (8),

-\fBINSTALL\fR in the Open vSwitch distribution.
+.BR ovsdb\-server (1),
+\fBINSTALL.Linux\fR in the Open vSwitch distribution.