+.ST "Database Values"
+.PP
+Each column in the database accepts a fixed type of data. The
+currently defined basic types, and their representations, are:
+.IP "integer"
+A decimal integer in the range \-2**63 to 2**63\-1, inclusive.
+.IP "real"
+A floating-point number.
+.IP "Boolean"
+True or false, written \fBtrue\fR or \fBfalse\fR, respectively.
+.IP "string"
+An arbitrary Unicode string, except that null bytes are not allowed.
+Quotes are optional for most strings that begin with an English letter
+or underscore and consist only of letters, underscores, hyphens, and
+periods. However, \fBtrue\fR and \fBfalse\fR and strings that match
+the syntax of UUIDs (see below) must be enclosed in double quotes to
+distinguish them from other basic types. When double quotes are used,
+the syntax is that of strings in JSON, e.g. backslashes may be used to
+escape special characters. The empty string must be represented as a
+pair of double quotes (\fB""\fR).
+.IP "UUID"
+Either a universally unique identifier in the style of RFC 4122,
+e.g. \fBf81d4fae\-7dec\-11d0\-a765\-00a0c91e6bf6\fR, or an \fB@\fIname\fR
+defined by the \fBcreate\fR command within the same \fBovs\-vsctl\fR
+invocation.
+.PP
+Multiple values in a single column may be separated by spaces or a
+single comma. When multiple values are present, duplicates are not
+allowed, and order is not important. Conversely, some database
+columns can have an empty set of values, represented as \fB[]\fR, and
+square brackets may optionally enclose other non-empty sets or single
+values as well.
+.PP
+A few database columns are ``maps'' of key-value pairs, where the key
+and the value are each some fixed database type. These are specified
+in the form \fIkey\fB=\fIvalue\fR, where \fIkey\fR and \fIvalue\fR
+follow the syntax for the column's key type and value type,
+respectively. When multiple pairs are present (separated by spaces or
+a comma), duplicate keys are not allowed, and again the order is not
+important. Duplicate values are allowed. An empty map is represented
+as \fB{}\fR, and curly braces may be optionally enclose non-empty maps
+as well.
+.
+.ST "Database Command Syntax"
+.IP "\fBlist \fItable \fR[\fIrecord\fR]..."
+List the values of all columns of each specified \fIrecord\fR. If no
+records are specified, lists all the records in \fItable\fR.
+.IP
+The UUIDs shown for rows created in the same \fBovs\-vsctl\fR
+invocation will be wrong.
+.
+.IP "[\fB\-\-if\-exists\fR] \fBget \fItable record column\fR[\fB:\fIkey\fR]..."
+Prints the value of each specified \fIcolumn\fR in the given
+\fIrecord\fR in \fItable\fR. For map columns, a \fIkey\fR may
+optionally be specified, in which case the value associated with
+\fIkey\fR in the column is printed, instead of the entire map.
+.IP
+For a map column, without \fB\-\-if\-exists\fR it is an error if
+\fIkey\fR does not exist; with it, a blank line is printed. If
+\fIcolumn\fR is not a map column or if \fIkey\fR is not specified,
+\fB\-\-if\-exists\fR has no effect.
+.
+.IP "\fBset \fItable record column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
+Sets the value of each specified \fIcolumn\fR in the given
+\fIrecord\fR in \fItable\fR to \fIvalue\fR. For map columns, a
+\fIkey\fR may optionally be specified, in which case the value
+associated with \fIkey\fR in that column is changed (or added, if none
+exists), instead of the entire map.
+.
+.IP "\fBadd \fItable record column \fR[\fIkey\fB=\fR]\fIvalue\fR..."
+Adds the specified value or key-value pair to \fIcolumn\fR in
+\fIrecord\fR in \fItable\fR. If \fIcolumn\fR is a map, then \fIkey\fR
+is required, otherwise it is prohibited. If \fIkey\fR already exists
+in a map column, then the current \fIvalue\fR is not replaced (use the
+\fBset\fR command to replace an existing value).
+.
+.IP "\fBremove \fItable record column \fR\fIvalue\fR..."
+.IQ "\fBremove \fItable record column \fR\fIkey\fR..."
+.IQ "\fBremove \fItable record column \fR\fIkey\fB=\fR\fIvalue\fR..."
+Removes the specified values or key-value pairs from \fIcolumn\fR in
+\fIrecord\fR in \fItable\fR. The first form applies to columns that
+are not maps: each specified \fIvalue\fR is removed from the column.
+The second and third forms apply to map columns: if only a \fIkey\fR
+is specified, then any key-value pair with the given \fIkey\fR is
+removed, regardless of its value; if a \fIvalue\fR is given then a
+pair is removed only if both key and value match.
+.IP
+It is not an error if the column does not contain the specified key or
+value or pair.
+.
+.IP "\fBclear\fR \fItable record column\fR..."
+Sets each \fIcolumn\fR in \fIrecord\fR in \fItable\fR to the empty set
+or empty map, as appropriate. This command applies only to columns
+that are allowed to be empty.
+.
+.IP "[\fB\-\-id=@\fIname\fR] \fBcreate\fR \fItable column\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR..."
+Creates a new record in \fItable\fR and sets the initial values of
+each \fIcolumn\fR. Columns not explicitly set will receive their
+default values. Outputs the UUID of the new row.
+.IP
+If \fB@\fIname\fR is specified, then the UUID for the new row may be
+referred to by that name elsewhere in the same \fBovs\-vsctl\fR
+invocation in contexts where a UUID is expected. Such references may
+precede or follow the \fBcreate\fR command.
+.
+.IP "\fR[\fB\-\-if\-exists\fR] \fBdestroy \fItable record\fR..."
+Deletes each specified \fIrecord\fR from \fItable\fR. Unless
+\fB\-\-if\-exists\fR is specified, each \fIrecord\fRs must exist.
+.
+.IP "\fBwait\-until \fItable record \fR[\fIcolumn\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR]..."
+Waits until \fItable\fR contains a record named \fIrecord\fR whose
+\fIcolumn\fR equals \fIvalue\fR or, if \fIkey\fR is specified, whose
+\fIcolumn\fR contains a \fIkey\fR with the specified \fIvalue\fR. Any
+of the operators \fB!=\fR, \fB<\fR, \fB>\fR, \fB<=\fR, or \fB>=\fR may
+be substituted for \fB=\fR to test for inequality, less than, greater
+than, less than or equal to, or greater than or equal to,
+respectively. (Don't forget to escape \fB<\fR or \fB>\fR from
+interpretation by the shell.)
+.IP
+If no \fIcolumn\fR[\fB:\fIkey\fR]\fB=\fIvalue\fR arguments are given,
+this command waits only until \fIrecord\fR exists. If more than one
+such argument is given, the command waits until all of them are
+satisfied.
+.IP
+Usually \fBwait\-until\fR should be placed at the beginning of a set
+of \fBovs\-vsctl\fR commands. For example, \fBwait\-until bridge br0
+\-\- get bridge br0 datapath_id\fR waits until a bridge named
+\fBbr0\fR is created, then prints its \fBdatapath_id\fR column,
+whereas \fBget bridge br0 datapath_id \-\- wait\-until bridge br0\fR
+will abort if no bridge named \fBbr0\fR exists when \fBovs\-vsctl\fR
+initially connects to the database.
+.IP
+Consider specifying \fB\-\-timeout=0\fR along with
+\fB\-\-wait\-until\fR, to prevent \fBovs\-vsctl\fR from terminating
+after waiting only at most 5 seconds.