lib: route-table improvements.

[openvswitch] / utilities / ovs-vsctl.8.in

diff --git a/utilities/ovs-vsctl.8.in b/utilities/ovs-vsctl.8.in
index 281756c90c885131e351452276beed23bef58960..c550909f40ade14247416651ad726276979d2612 100644 (file)
--- a/utilities/ovs-vsctl.8.in
+++ b/utilities/ovs-vsctl.8.in
@@ -148,10 +148,10 @@ initialize the database without executing any other command.
 .IP "\fBemer\-reset\fR"
 Reset the configuration into a clean state.  It deconfigures OpenFlow
 controllers, OVSDB servers, and SSL, and deletes port mirroring,
 .IP "\fBemer\-reset\fR"
 Reset the configuration into a clean state.  It deconfigures OpenFlow
 controllers, OVSDB servers, and SSL, and deletes port mirroring,

-NetFlow, and sFlow configuration.  This command also removes all
-\fBother\-config\fR keys from all database records, except that
-\fBother\-config:hwaddr\fR is preserved if it is present in a Bridge
-record.  Other networking configuration is left as-is.
+\fBfail_mode\fR, NetFlow, and sFlow configuration.  This command also
+removes all \fBother\-config\fR keys from all database records, except
+that \fBother\-config:hwaddr\fR is preserved if it is present in a
+Bridge record.  Other networking configuration is left as-is.

 .
 .SS "Bridge Commands"
 These commands examine and manipulate Open vSwitch bridges.
 .
 .SS "Bridge Commands"
 These commands examine and manipulate Open vSwitch bridges.


@@ -450,6 +450,9 @@ identified by mirror name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
 particular bridge may be identified by the bridge's name.
 .IP "\fBController\fR"
 Configuration for an OpenFlow controller.  A controller attached to a
 particular bridge may be identified by the bridge's name.

+.IP "\fBManager\fR"
+Configuration for an OVSDB connection.  Records may be identified
+by target (e.g. \fBtcp:1.2.3.4\fR).

 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.
 .IP "\fBNetFlow\fR"
 A NetFlow configuration attached to a bridge.  Records may be
 identified by bridge name.


@@ -460,6 +463,11 @@ specifying \fB.\fR as the record name.
 .IP "\fBsFlow\fR"
 An sFlow configuration attached to a bridge.  Records may be
 identified by bridge name.
 .IP "\fBsFlow\fR"
 An sFlow configuration attached to a bridge.  Records may be
 identified by bridge name.

+.IP "\fBMonitor\fR"
+Connectivity Monitoring attached to an interface.  Records may be
+identified by interface name.
+.IP "\fBMaintenance_Point\fR"
+Maintenance Point managed by a Monitor.

 .PP
 Record names must be specified in full and with correct
 capitalization.  Names of tables and columns are not case-sensitive,
 .PP
 Record names must be specified in full and with correct
 capitalization.  Names of tables and columns are not case-sensitive,


@@ -690,6 +698,21 @@ then delete the QoS record:
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
 \fIuuid2\fR" to destroy each of them.)
 database.  To delete them, use "\fBovs\-vsctl list Queue\fR" to find
 their UUIDs, then "\fBovs\-vsctl destroy Queue \fIuuid1\fR
 \fIuuid2\fR" to destroy each of them.)

+.SS "Connectivity Monitoring"
+.PP
+Create a Monitor which manages a couple of remote Maintenance Points on eth0.
+.IP
+.B "ovs\-vsctl \-\- set Interface eth0 Monitor=@newmon \(rs"
+.IP
+.B "\-\- \-\-id=@newmon create Monitor mpid=1 remote_mps=@mp2,@mp3 \(rs"
+.IP
+.B "\-\- \-\-id=@mp2 create Maintenance_Point mpid=2 \(rs"
+.IP
+.B "\-\- \-\-id=@mp3 create Maintenance_Point mpid=3"
+.PP
+Deconfigure the Monitor record from above:
+.IP
+.B "ovs\-vsctl clear Interface eth0 Monitor"

 .SS "NetFlow"
 .PP
 Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on
 .SS "NetFlow"
 .PP
 Configure bridge \fBbr0\fR to send NetFlow records to UDP port 5566 on